Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Radial Drill Alzmetall AX3/S

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2009
ready for operation (used)
Ser. No. PRJ041160, speed 160-2.250 rpm., machine vice, swivel-mounted Bcr8nnywsr more
5
Drilling machine, vertical drilling machine, drilling machines, column drilling machine Table size 260 x 255 mm Spindle retainer MK2 Unloaded 260 mm -Drehzahlen 200-1200 U/min Columns ø 95 mm Lmznn Spindle stroke 110 mm -VIP gear Dimensions 410/800/H1950 mm Weight 230 kg more

Pillar Drilling Machine BLUTHARDT 4 BAV

Düsseldorf, GermanyGermany dealership location
6394 km
1986
used
bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 200 mm Control total power requirement kW 7lnspqxj7 weight of the machine ca. t dimensions of the machine ca. m more
5

Pillar Drilling Machine EIKO B2

Leipzig, GermanyGermany dealership location
6734 km
1961
used
bore capacity in steel (diameter): 20 mm throat: 200 mm bore stroke: 100 mm spindle taper MT: 2 column diameter: 80 mm revolution per minute: 500-800-1250-2000 U/min drill table: 340x280 mm table rotating: 360 ° table adjustment: 650 mm total power requirement: 0,4 kW Bnssz3y8 machine weight approx.: 186 kg space requirement of the machine approx.: 0,8,x0,5x1,8 m more
2
Column drilling machine Alzmetall Type: AX3S BJ. 1978 Recording MK3 160-1125 U/min stepless speeds. Clamping surface approx. 420x400mm. Quill stroke 120 mm. Coolant system. Power: 400 Volt 1.00 / 1,3KW Space required: B 55 cm D 85 cm H 180 cm weight approx. 250 kg Bcndlk9och more
6
Column drilling machine Fabr. SOLID type B-23 Fabr.# 514494/ 132401 with pneumat. Feed Technical data: Spindle mount MT 3 Drilling capacity approx. 23 mm Throat depth 300 mm Saeulendrm. 120 mm Table size 330 x 280 mm Size of the base plate 400 x 370 mm 12 spindle speeds 100-2250 RPM Power 1.3 / 2.5 PS with: -pneumtischem drill bit feed -pneumatic indentation of the feed -Emergency / off 2fjfbwim used, in good condition more
5

Pillar Drilling Machine IXION BS23 ST

Ahaus, GermanyGermany dealership location
6367 km
1999
used
bore capacity in steel (diameter) 28,0 mm throat 250 mm bore stroke 120 mm spindle taper MT 3 MK table: 500 x 350 mm 7ljbbs70v column diameter 120 mm turning speeds 80 - 1.400 U/min total power requirement 0,7 / 1,3 kW weight of the machine ca. 210 kg. more
5
Drilling machine, vertical drilling machine, drilling machines, column drilling machine Table size 250 x 250 mm Ev9tok9 Spindle retainer MK2 Unloaded 245 mm -Drehzahlen 280-3000 U/min Columns ø 90 mm Spindle stroke 90 mm V-belt Dimensions 800/350/H1760 mm Weight 180 kg more
4
Spindle retainer: MK4 greatest distance spindle nose to table: 710 mm Maximum drilling diameter ST60: 25 mm Throat depth: 315 mm Table area: 450 x 560 mm Height of the head: 280 mm Feed: 0.08 1.25 mm / U in 9 steps Spindle speed: 63-1000 RPM in 9 steps Engine power: 2,2 kW (power rating: 2.4 kW) Dimensions L x W x H: 700 x 1250 x 2650 mm weight: 1000 kg Nfayp Price on request! more


Pillar dri...
daily

New machines via email!

Stay updated!
5

Pillar Drilling Machine nicht bekannt DK 20

Leipzig, GermanyGermany dealership location
6734 km
1972
used
bore capacity in steel (diameter): Ø 20 mm throat: 265 mm bore stroke: 140 mm spindle turning speed - continuous: 95 - 2000 / 10 step U/min spindle taper MT: 2 feed: 0,08 - 0,32 / 4 step mm/U headstock adjustment: 200 + drehbar mm distance - drill spindle & boring table-adjustable: min./max. 150/600 mm table surface area: L:350 x B:300 mm table swivable approx.: rechts/links 90° ° table rotating: 360 ° 7njrye8tf distance spindle/base plate: max.1000 mm base plate surface area: L:450 x B:360 mm ... more
4

Pillar Drilling Machine ALZMETALL AB3 ESV

More Alzmetall Ab 3
Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
1981
used
bore capacity in steel (diameter):28 mm throat:290 mm bore stroke:160 mm spindle taper:MK 3 stepless spindle speeds:65-1750 u/min 3 autom. feeds:0,-0,2-0,3 mm/U table surface area:500 x 380 mm column diameter:130 mm total power requirement:1,4/2,2 PS dimensions of the machine ca.:600 x 1000 x 1840 mm Bf2iyvlq weight of the machine ca.:380 kg more
6
Drilling capacity: 25 mm Chuck: MK 3 Throat depth: 290 mm Spindle stroke: 180 mm Speed, infinitely variable: (4) 65-1750 RPM Feed: 0.15 mm / Rev Table size: 515 x 400 mm Engine power: 1.0 / 1.6 kW Weight CA: 290 mm Color: Blue M0ye2 Facilities: stepless speed adjustment machined machine foot Coolant system Pole-reversible motor Engine light Speed display more
5
Drilling machine, vertical drilling machine, drilling machines, column drilling machine Delivery as is as seen Table size 300 x 240 mm Spindle retainer MK2 Iwjut8som Unloaded 340 mm -Drehzahlen U/min Columns ø 100 mm Spindle stroke 150 mm Flat belts 1050/700/H2030 dimensions mm Weight kg 286 more
5
Column drilling machine DK 203 Fabr. No. 4268 -with drill Chuck Lieferbed.: EXW Edderitz Gx3qrqate more
7

Column drill BIMAK 25TP

SchweizSwitzerland
6694 km
ready for operation (used)
Drilling capacity -25mm Btvmsmn Spindle taper MT 3 Drilling depth 120mm Spindle speeds 35-1980 rpm Table size 340x335mm MARCELS MASCHINEN CH more
5
Bohrlstg. in St.: 22 mm Throat depth: 230 mm Chuck: MK 3 Table size: 400 x 320 mm Spindle speeds: 100-1200 mm Stroke: 110 mm Total power consumption: 1.6 KW / 400 V Machine weight: approx. 220 kg Height: 1700 mm Ndf92 Equipment / Accessories: Right - left rotation Machine vise - see photo Röhm quick clamping Bohrfutter supra 3-16 mm Other: The machine runs very quietly. more
6

Column drilling machine ALZMETALL AB 3 ESV

More Alzmetall Ab 3
Bildstock 9/3, 88085 Langenargen, DeutschlandGermany
6744 km
excellent (used)
Motor pole changing bar 1.0 / 1.6 kW motor protection against therm. Overload Engine speed 700 / 1400 R/min Spindeldrehz. I 65 240 / 240-875 RPM II 130-480 / 480-1750 RPM Short spindle MK 3 Spindle stroke 160 mm Throat depth 300 mm Combined drilling table with Einschiebeschraubstock, Jaw width 125 mm, span 130 mm with round table Ø 450 mm Feed 0.1 / 0.2 / 0.3 mm Column diameter 145 mm Thread cutter with foot switch Bb9u0t7gbu Comprising A coolant system: -Coolant bas... more
6
- Made in Germany - max. diameter in steel ST 60: 28 mm - tool holder: MK 3 - drill spindle stroke: 120 mm - 10 different speeds between 160 - 2800 1/min - nosing 280 mm - max. distance table - spindle: 760 mm - table size 550 x 400 mm (no signs of usage) - height adjustment by toothed rack and hand crank - drive 380 V / 0,7/ 1,3 kW - dimensions LxWxH: ca. 550 x 850 x 1950 mm - weight ca. 320 kg Jm7m2bm07 accessories: - precision quick-action drill chuck, clamping range 0,2-16 m... more
5
Drilling machine, vertical drilling machine, drilling machines, column drilling machine Spindle mount MT 2 V-belt Table size 255 x 255 mm Unloaded 245 mm Spindle stroke 110 mm Speed 300-1800 R/min Dimensions 750/350/H1700 mm Weight 170 kg Qk8jd72o8 more
7
Brand Otto Muller Type/Model SR 23 Stock Number 1391 Year 1971 Technical details Drilling capacity 30 mm steel Spindle taper No 4 Radious approx 1000 mm Gygsnf3u3 The technical data provided in this advertisement are correct to the best of our knowledge but they are not binding for us. It is the responsibility of the customer to check the machine and decide to purchase it. We do not and will not accept any claims after the machine is collected. more
7
Drilling capacity -20mm Spindle taper MT2 Vsf0im Drilling depth 85mm Spindle speeds 300-2035 rpm Table size 350x250mm With integrated vice MARCELS MASCHINEN CH more
3
Huvema drilling machine offered. Type: HU 20 Max drilling diameter: 20 mm Table: 395 x 395 mm Stroke spindle: 95 mm Spindle: MT3 Speed: 95-2055 RPM Power: 230 V Goazr299y Machine height: 158 cm For more information call us or send an e-mail. more
6

Column drilling machine OPTIMUM B 28 HV

Odenwaldstr. 63, 63322 Rödermark, DEGermany
6579 km
2013
good (used)
Technical data: -Drilling capacity in steel ST 60 28 mm -Spindle mount MT 3 -Spindle hub 105 mm -Spindle RPM elect. adjustable 35-3600 RPM -Right + left rotation -Throat depth 200 mm -maximum distance spindle - table / base plate 860 / 1275 mm -Table with 2 T-slots 340 x 360 mm -Height-adjustable via rack and pinion with hand crank -Drive 220 V / 1,5 kW -Space requirement approx. B 500 x H 1800 X 800 mm -Weight approx. 150 kg -with:-keyless drill Chu... more
4

Column drilling machine Wolf T 11

Netphen-Deuz, GermanyGermany dealership location
6492 km
used
Column drilling machine Manufacturer: Wolf Type: T 11 Machine number: 30616 Column diameter: 150 mm Spindle mount MT 3 / 46 mm with quick-action Chuck Automatic feed Speeds 8 x 1550,1050,750, 500, 320, 215, 150, 95 RPM. 140 mm stroke Table size diameter 400 mm with T-slots Height 550 mm Bahxc3xc3i Throat depth 360 mm Voltage 380 Volt KW 1.5 more
1
OPTIdrill B 26PRO - column drilling machine Bench and column drilling machine with belt drive Bavy0xug7l Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton 400 Volt models with right/left rotation Drilling depth stop Precision machined table with diagonal T-slots Height adjustment of the drilling table with rack and pinion Drill table ± 45 ° tilt and 360 ° V-belt cover with safety switch Aluminium die-cast tailstock lever from one pi... more
3
gebr. Column drilling machine make FLOTT Model SB 23 ST. Nr. 17150424 Spindle mount MT 2 Drilling capacity 23 mm Drilling depth 150 mm Throat depth 300 mm Table size 300 x 410 mm Spindle speed 2 levels continuously 200-2000 RPM Motor 380 V 0.9/1.4 KW External dimensions: Width 700 mm Depth 900 mm Height 1900 mm Mp9h9 Weight approx. 315 kg more
11
Drilling capacity -20mm Spindle taper MT3 Spindle speeds 25-2560 rpm Table surface 700x540mm Cmbpbnmf Side 880x700mm Throat 610mm Workpiece height on table -660mm MARCELS MASCHINEN CH more
6

Column drilling machine VEMA 25

Mindelheim, GermanyGermany dealership location
6785 km
used
Chuck: MK 3 Drilling capacity: 25 mm Spindle speeds: (8) 130-1.500 U/min Size: 280 x 320 mm Dvonxu Facilities: Machine lamp Drilling depth indicator Drilling depth adjustment through transmission gearbox Fine feed via Handwheel machined base with T-slots new pole switching toggle switch new spring new cable more
2
SAEULEMBOHRMASCHINE MAKE ALZMETALL 4 Bbqppxsdrd more
6
Column Drilling Machine with Revolver Drilling performance steel St 60 20 mm Drilling Performance cast-iron 23 mm Tapping performance steel M 16 Tapping performance cast-iron M 20 Tool taper SK 30 Table 614 x 370 mm Feed 1 - 3000 mm/min Spindle speeds 55 - 5000 rpm Ibjtd89 Motor 3 kW Weight approx. 550 kg more
1
OPTIdrill B-25 low-cost bench and column drilling machines with v-belt drive drilling Precision machined table, ± 45 ° tilt and 360 ° Massive, large base plate with slots, back strongly ribbed Tried and tested quality from B-14 T slot nuts vise mount from B-20 Precisely crafted, sturdy table with diagonal T-grooves and circumferential coolant Groove from B-20 / 400 V Right / left rotation rotary switches Equipment details Polished splined hubs Best power transmission by aluminium pul... more
4
Column drill Distance column spindle centre 380 mm 2 speeds Bbg3ozxd83 Motor 400 vlt, 50 Hz, 3 phase, 1,1 Kw Stock no:103469 Price: 8500 SEK more
4

Drilling machines Flott SB23S

More Flott Sb 23
Langwedel, GermanyGermany dealership location
6465 km
1975
used
gebr. Column drilling machine make FLOTT Model SB 23 S Spindle mount MT 2 Drilling performance 28 / 32 mm Bawv29gmwz Drilling depth 150 mm Throat depth 300 mm Table size 300 x 410 mm Spindle speed 2 levels 100-1000 rpm Motor 380 V external dimensions: Width 700 mm Depth 900 mm Height 1900 mm Weight 315 kg more
1

Säulenbohrmaschine TB 20

Mindelheim, GermanyGermany dealership location
6785 km
as good as new (ex-display)
Tool fixture: MK2 drilling capacity max: 20 mm Speed ​​range:. 100-2600 Motor Power: 0.55 kW - 1.1 kW 2-stage motor: yes Quill stroke: 83 mm hinged guard: yes Table Size: 300 x 300 distance tool holder - Machine table: 750 mm distance from the machine foot - Tool: 1250 mm Table tilt (yes: specify): yes, + / - 45 table with scale: yes Accessories: - Quick-including Dorn - Machine vice - Instructions Rbi9nvu7c more
3

Column drilling machine ADAM MC 22

weiterstadt, GermanyGermany dealership location
6569 km
used
Column drilling machine Fabr. Adam MC 22 speed 240-1650 RPM Spindle mount MT 2 three-phase 400 Volt Drehbahrer drill table / vise Drehzahlvertellung by flipping the v-belt Buvehnxg more

Pillar drilling machine BLUTHARDT/PARABO 4 B

Wiesbaden, GermanyGermany dealership location
6534 km
1956
used
drilling capacity steel/GG: 23 mm spindle taper: 2 MK arm length: 300 mm Naxbkfeu9 table size: 300 x 300 mm spindle sleeve stroke: 100 mm spindle turning speed range: 190 - 1500 rpm engine: 380 V, 0,5/0,75 kW space needed: 410 x 670 x 1950 mm weight: 180 kg more
1
Column drilling machine Fabr. FLOTT SB 15 type Masch. # 47646 Technical data: Drilling capacity in St / GG 16 / 18 mm Spindle mount MT 2 Quill stroke 80 mm Throat depth 200 mm Column diameter 70 mm 6 spindle speeds 400-4000 RPM. Table size 200 x 280 mm Distance from spindle to table 80-650 mm 0.55 kW Dimensions L x W x H 400 x 800 x 2000 mm Weight 116 kg approx. with -Pneum.. Pinolenvorshub -Pneumatic two hand disengagement used Bzswjcz more
6

High performance drilling FORMAT SB 32 AV

Rödermark, GermanyGermany dealership location
6579 km
1994
used
Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 9... more
5

Gear Head drill machine Nider RIWA 25

Offenburg, GermanyGermany dealership location
6591 km
2008
used
Drilling gear drill RIWA 25 Built in 2008 Ft0eahd Drilling ø 25 mm Gewindebohrleistung M16 Drilling depth 135 mm Tool holder MK 3 Motor power (50 Hz) 0.65 kW / kW 0.90 Motor kW (60 Hz) 0.80 / 1.10 kW Speed (50 Hz) 105 ~ 2900 rpm RPM (60 Hz) 130 ~ 3480 rpm Size of work table 500 x 350 mm Net weight approx. 200 kg Drilling depth setting Incl. Chuck Röhm supra 3-16 more
4
Chuck: MK 2 Drilling capacity: 23 mm 9o3vqolcu Speed range: (6) 200-2000 U/min Quill stroke: 100 mm Table size: 360 x 290 mm Throat depth: 240 mm Engine power: 1,0 kW Power supply: 400 V Approximate weight: 150 kg Facilities: Machine lamp Machine vise more
2
Drill chuck: MK 2 Max drilling diameter: 25 mm. Drilling height: 500 mm Speed: 900 r / min. Uvmfg more
3
with feed attachment of larger drills worm reducers can be switched there. Then you can with Handwheel drill variable speed 135-240-450-730 U/Min.Ausladung machine column MP drill 320 mm, table Aufspannfl.D 360 mm table D 440 mm Yjzyuef3 more
6
Box drilling Fabr. ALZMETALL 3 HST type Masch. # 1752 built 1984-technical data: Drilling capacity in steel St 60 28 mm Drilling capacity in steel St 60 40 mm Drilling capacity in cast iron GG 20 35 mm Thread cutting steel St 60 M 22 Tapping in cast iron GG 20 M 33 Spindle mount MT 3 Spindle speed continuously 130-1750 RPM. Throat depth 330 mm Spindle stroke 160 mm Table size 600 x 460 mm 3 aut. Feeds 0.1 / 0.2 / 0.3 mm / Rev Power 1.0 / 1.6 kW Weight approx. 700 kg with -elektro... more
4

High performance drilling ALTZMETAL AB 25 SV

Rödermark, GermanyGermany dealership location
6579 km
1979
used
Technical data: -Drilling capacity in steel ST 60 25 mm -Drilling capacity in steel ST 60 28 mm -Spindle mount MT 3 -Spindle hub 180 mm -Infinitely variable spindle speeds -adjustable - level 1 130-480 RPM -Level 2-480-1700 RPM -Feed 0.15 mm / Rev -Throat depth 290 mm -maximum distance table - spindle 620 mm -Table with 2 T-slots approx. 520 x 400 mm -Height-adjustable via rack and pinion with hand crank 9suixkd28 -Drive: 400 V / 1.1 / 1.3 kW -Space requirement approx. B 660 x H... more
5
Internal item No.: 17155 Alzmetall Abomat 20 Ba3v0rbbw3 YEAR: 1984 Spindle retainer: MK 3, table size: 500 x 400 mm, throat depth: 270 mm, spindle speed range: 1500 to 3000 rpm, feed vertical limit switch, adjustable stroke approx 400 mm, adjustable hand control panel with wiring diagram more
5
Alzmetall AB 4S. No. 1116. 90-900 RPM continuously. Column 160 mm. 7rcfoq3t3 Recording MK 4 more
4

Column drilling machine Ixion BT 25 F

Berlin, GermanyGermany dealership location
6745 km
used
Table size: 510x200mm Stroke: 120mm Dyp39ve maximum drilling diameter: 30 mm Demonstration of power possible. more
1

Drill press IXION BS 23 ST

Staufenberg, GermanyGermany dealership location
6563 km
1985
used
Column drilling machine Fabr. IXION type BS-23 ST Masch. # 00115677 year 1985 Technical data: Dauerbohrleistung 23 mm J7rf9eidj Standard ALB ear performance 28 mm Spindle MK 3 Depth 120 mm Throat depth 260 mm Distance from spindle to table 90-760 mm Table surface 500 x 350 mm Column diameter 110 mm Total height 1850 mm Weight 255 kg used, in very good condition more


Pillar dri...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close