Technical data:
- Drilling capacity in steel ST 60 32 mm
- Drilling capacity in steel ST 60 36 mm
- Drilling spindle mounting MK 3
- drilling spindle stroke 160 mm
- feeds electronic 32 - 320 mm/min
- Drilling spindle speeds infinitely variable 100 - 2000 - rpm
- Digital speed display + drilling depth display
- throat 300 mm
Lt8l9
- max distance table - drilling spindle 560 mm
- max distance foot plate - drill spindle 1150 mm
- Table with 2 T-slots 590 x 450 mm
- Height adjustable v...
Automatic drill, drill press, drill press, stand drill, pillar drill
-Spindle mount: MK 3
-Transmission
-Automatic drill: with rapid traverse
-Automatic drilling
-Threading: automatic
-Table size: 450 x 360 mm
Ut3efnyr9
-Projection: 285 mm
-Spindle stroke: 150 mm
-Speed: 180-2000 rpm
-Feed: 0.08-0.32 mm/rev
-Dimensions: 900/1000/H2100 mm
-Weight: 840 kg
bore capacity in steel (diameter) 23,0 mm
throat 250 mm
bore stroke 100 mm
Beobzpwq3k
morse taper 2 MK
table: 370 x 300 mm
turning speeds 225 - 4.300 U/min
engine output 0,6/0,95 kW
column diameter 90 mm
weight 175 kg
Machine height 1770 mm
Furnishing :
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Reversing switch for clockwise and counterclockwise rotation
- Motor protection switch
- Infinitely variable speed adjustment
- Digital speed display
- Protection class IP 54
- Connection p...
TECHNICAL SPECIFICATIONS Column diameter 115 mm Length about 725 mm Width / depth about 450 mm Height approx. 2175 mm Weight (net) about 350 kg Drilling performance Drilling capacity steel (S235JR) 35 mm Continuous drilling capacity steel (S235JR) 30 mm Thread cutting steel (S235JR) M 24 Drilling table Drilling table work surface length 400 mm Drilling table working surface width 420 mm Drilling table type of T-slot diagonal Drilling table T-slots size 14 mm Load capacity drilling table 200 kg D...
bore capacity in steel (diameter):35 mm
Bsxtd2eguo
throat:300 mm
bore stroke:150 mm
tool adaptor:MK 4
bore capacity in steel (diameter) 40 mm
Bisxhmqkju
throat 220 mm
bore stroke 100 mm
spindle taper MT 4
spindle turning speed range 105 - 1257 U/min
no. of turning speeds 8 Stufen
table surface area 400 x 320 mm
base plate 390 x 650 mm
voltage 400 V / 50 Hz
total power requirement 1,1 / 1,8 kW
weight of the machine ca. 300 Kg
range L-W-H 2,1 x 1,0 x 0,7 mm
with RÖHM quick-action chuck 3-16 mm,
coolant device,
vise,
Drilling capacity in steel 35 mm tool holder MK 3 clockwise and counterclockwise rotation Infinitely variable speed adjustment with digital display
X77ys
Pillar drill, stand drill, stand drill
-spindle taper: MK3
-Table size: Ø 300 x 300 mm
-Projection: 245 mm
-Columns: Ø 110 mm
-Spindle stroke: 115 mm
-Feed: 0.1/0.15/0.2 mm/rev
-Speed: 80-1000 rpm
-Drive: 1.2 kW 700/1400 rpm
Tix8ar9w0
-Dimensions: 800/450/H1750 mm
-Weight: 260 kg
bore capacity in steel (diameter) 30,0 mm
throat 293 mm
bore stroke 140 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 225 - 4.300 U/min
engine output 1,0 / 1,6 kW
column diameter 115 mm
weight 260 kg
Machine height 1.790 mm
Furnishing:
Beobzzhwql
- stepless speed adjustment
- Reversing switch for R / L run
- digital speed display
- Connector and cable mounted
- Spindle protection with electr. validation
- 2 mtr. Connection cable with plug 16A
bore capacity in steel (diameter) 32 mm
throat 300 mm
spindle stroke - max. 150 mm
bore capacity in cast iron 35 mm
thread capacity M 22 in Stahl 60
table-size 480 x 480 mm
column diameter 125 mm
spindle taper MK 4
turning speed range - stepless 80 - 1700 U/min
Bew3frzep0
feeds 0,1 - 0,2 mm/min
weight of the machine ca. 340 kg
dimensions ca. 800 x 1000 x 2000 mm
Drilling capacity in St 60: 30 mm
Thread cutting in ST 60: M 16
Thread cutting in GG 20: M 20
Short spindle: MK 3
drilling stroke: 140 mm
throat depth: 293 mm
column diameter: 115 mm
machine table - usable support: 514x360 mm
T-slots number - width - distance: 2 x 14 x 224 mm
distance spindle - machine table min./max.: 132/724 mm
feed: manual
spindle speeds: 100-1800 rpm
total power requirement: 1,0/1,6 kW
Machine weight: approx. 260 kg
machine height: 1790 mm
POS.12 LED machine light
Connected ...
bore capacity in steel (diameter) 35 mm
throat 350 mm
Vso3we
bore stroke 180 mm
thread dia. M 27 mm
spindle turning speed range 100 - 1450 U/min
feeds 0,1 - 0,2 mm/U
spindle taper MT 4
table surface area 560 x 385 mm
Distance spindle/table max. 780 mm
distance spindle/base plate 1320 mm
voltage 400 V / 50 Hz
total power requirement 1,5 kW
weight of the machine ca. 0,65 t
dimensions of the machine ca. 1,2 x 0,7 x 2,2 m
with cooling and thread cutting device,
adjustable bore depth with au...
Drilling capacity in steel (diameter): 5 - 30 mm
Pffgt
Spindle speeds: 75 - 1,600 rpm
with multiple drilling head
automatic drilling device (cam)
Disassembled for transport and storage purposes.
Automatic drill, drill, plate drill, row drill
-Automatic drill: for advertising signs
-Spindle mount: 12 mm (can be changed according to customer requirements)
-Automatic drilling
-Table size: 1200 x 1000 mm
-Spindle stroke: 200 mm
7rmqr2hct
-Speed: 2800 rpm
-Feed: via gear
-pneumatic workpiece clamping
-Pneumatic workpiece ejection
-Dimensions: 1360/1520/H2180 mm
-Weight: 450 kg
bore capacity in steel (diameter) 34,0 mm
throat 300 mm
bore stroke 160 mm
morse taper 4 MK
table: 615 x 430 mm
bore capacity in cast iron 40,0 mm
threading 24 in ST M
threading 30 in GG M
turning speeds 100 - 1.800 U/min
total power requirement 1,4 / 2,2 kW
weight 470 kg
height of the machine 1865 m
Furnishing:
- Electromagnetic feed clutch
- with overload protection and electrical cross-handle switch
- Lockable main switch
Nloin
- Motor protection switch
- Mushroom pushbutton (latching) for...
bore capacity in steel (diameter) 28 mm
throat 285 mm
bore stroke 180 mm
spindle taper MK 3
bore capacity in cast iron 32 mm
spindle turning speed range 110 - 1450 U/min
drilling feeds 0,1 - 0,2 - 0,3 mm/U
total power requirement 1,5 kW
weight of the machine ca. 1 t
dimensions of machine L x W x H 1,35 x 1,5 x 2,4 m
Damuyad
- with FEHLMANN cross table, clamping surface 600 x 320 mm,
cross table manually movable X/Y = 420/300 mm, with DRO
HEIDENHAIN on X/Y
Accessories: FIBROTAKT rotary in...
bore capacity in steel (diameter) 32 mm
throat 300 mm
Boring depth max. 150 mm
spindle turning speed - stepless 205 - 1450 U/min
spindle taper 3 MK
table-size 500 x 450 mm
feeds 3: 0,06-0,12-0,16 mm/U
engine output 1,6 kW
dimensions of the machine ca. 0,9 x 0,7 x 2,5 m
weight 630 kg
Beob9oobm8
Electric 380 Volt
Right- left turning
Cooling equipment
Stepless turning speed regulation
Solid drilling machine, German quality product, table AND drill head by hand
crank HEIGHT ADJUSTABLE to...
bore capacity in steel (diameter) 40 mm
throat 350 mm
Benyg0mtyf
bore stroke 180 mm
spindle turning speed range 0-1800 (vario) U/min
thread dia. M 24 mm
feeds 0,1 - 0,2 mm/U
spindle taper MT 4
table surface area 560 x 560 mm
Distance spindle/table max. 500 mm
column diameter 150 mm
distance spindle/base plate 1100 mm
Total height 2400 mm
voltage 400 V / 50 Hz
total power requirement 1,5 kW
weight of the machine ca. 0,46 t
dimensions of the machine ca. 1,2 x 0,7 x 2,2 m
with cooling device
...
bore capacity in steel 30 mm
threading cutting capacity: M20
throat 260 mm
bore stroke 125 mm
spindle taper MK 3
feed range - spindle 30 - 400 mm/U
spindle turning speed range 80 - 1440 / 180 -3200 U/min
transmission ratio 2 Stufen
Bh77cmi2om
column diameter 110 mm
table surface area 500 x 365 mm
total power requirement 0,8 / 1,4 kW
weight of the machine ca. 0,27 t
dimensions of the machine ca. 0,4 x 1,2 x 1,9 m
Equipment:
- Gears made of hardened and ground steel
- Front speed selector lev...
Automatic drill, drill press, drill press, stand drill, pillar drill
-Spindle mount: MK 3
-Transmission
-Automatic drill: with rapid traverse
-Automatic drilling
-Threading: automatic
-Table size: 450 x 360 mm
-Projection: 285 mm
-Spindle stroke: 150 mm
2pc9we
-Speed: 180-2000 rpm
-Feed: 0.08-0.32 mm/rev
-Dimensions: 900/600/H2100 mm
-Weight: 740 kg
bore capacity in steel (diameter) 35,0 mm
bore capacity in cast iron 40,0 mm
throat 320 mm
threading M 24 in Stahl
morse taper 4 MK
bore stroke 160 mm
Be27jlov3o
turning speeds 65 - 3250 U/min
table: 500 x 420 mm
throat 320 mm
weight 375 kg
range L-W-H 600 x 870 x 2.170 mm
Furnishing:
- Infinitely variable speed, ideal for
- Set the desired cutting speed.
- Automatic tool ejector and thread cutting device as standard
- Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev
- Soli...
Bernardo geared drill GB 35 Vario
Technical specifications
Drilling capacity in steel 35 mm
Drilling capacity in cast 40 mm
Thread cutting max. M24
Drill Chuck 1-13 mm / B-16
Dome MK 4
Spindle speed / 2 levels 65-460 / 460 - 3250 RPM
Feed range 0.1 / 0.2 / 0.3 mm / Rev
Throat depth 320 mm
Distance from spindle / table max 580 mm
Distance from spindle / base plate 1145 mm
Quill stroke 160 mm
Column diameter 120 mm
Table size / T - slot size 500 x 420 mm / 14 mm
Desktop Base 365 x 370 mm
Ikz8wibou...
bore capacity in steel (diameter) 35/45 mm
throat 345 mm
bore stroke 170 mm
feeds 0,09/0,16/0,28 mm/U
column diameter 160 mm
spindle taper MK 4
rotary table dia. 560 mm
spindle turning speed range 80 - 720 U/min
total power requirement 1,6/2,5 kW
weight of the machine ca. 600 kg
dimensions of the machine ca. 0,9 x 0,6 x 1,96 m
Electric 380 Volt
Gix2phz33
Cooling pump in machine base
Machine dealer with own stock of 2500 m².
bore capacity in steel (diameter) 30 mm
throat 300 mm
bore stroke 120 mm
Pcxyz
spindle taper MT 3
total power requirement 1,7 kW
weight of the machine ca. 0,35 t
dimensions of the machine ca. 0,7 x 0,5 x 2,1 m
bore capacity in steel (diameter) 32 mm
throat 300 mm
bore stroke 150 mm
spindle MK 4
table surface area 480 x 480 mm
feed range - spindle 0,1 - 0,2 mm/U
threading cutting capacity: M 22 (St 60)
bore capacity in cast iron 35 mm
spindle turning speed - stepless 80-1170 U/min
total power requirement 1,45 kW
weight of the machine ca. 0,34 t
dimensions of the machine ca. 0,8 x 1,0 x 2,0 m
Pillar Drilling Machine with:
- stepless speed
- Scale with adjustable drilling depth
- automatic tool ejec...
Automatic drill, drill, stand drill, column drill, column drill, multi-spindle head, multi-spindle drill head, drilling gear
-Automatic drilling machine: with roller conveyor and stop
Ok9jf
-spindle taper: MK2
-Multi-spindle drill head:
-Drive: V-belt
-Projection: 135 mm
-Spindle stroke 50 mm
-Speed 270 - 2400 rpm
-Feed: pneumatic stepless
-Drive: 0.48/0.68 kW
-Dimensions: 600/3250/H1610 mm
-Weight: 264 kg
bore capacity in steel (diameter) 34,0 mm
throat 300 mm
bore stroke 160 mm
morse taper 4 MK
table: 615 x 430 mm
turning speeds 100 - 1.800 U/min
engine output 1,4 / 2,2 kW
column diameter 145 mm
thread M24 ST60
thread M30 GG20
weight 470 kg
Machine height 1865 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling depth scale in the dis...
PILLAR DRILLING MACHINE IBERDRILL AZ 34
TECHNICAL DATA - STANDARD
max. drilling capacity for steel (St 60) at continuous power S1 Ø 34 mm
max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 40 mm
max. tapping capacity for steel (St 60) at continuous output S1 M 27
max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 33
tool holder in spindle MK 4
max. spindle stroke (drilling depth) 150 mm
motor power spindle 3 kW
Drive V-belt
Speed adjustment steple...
Boring power 28 mm
Center of spindle to wall or column 285 mm
bore depth 180 mm
spindle taper MT MK 3
table-size 375 x 800 mm
feed 0,1/0,2/0,3 mm/U
Speed 110 - 1450 U/min.
drilling capacity steel/cast iron 35 mm
column diameter 130 mm
Motor output 1,5 KW
Ikefkox9
weight of the machine ca. 380 kg
range L-W-H 800 x 900 x 1900 mm
Condition: ready for operation
Electric 380 Volt
Stepless turning speed regulation
Autom. feed
Foot switch ein / aus
Column drilling machine of the solid AB s...
FLOTT | 30 STG VE/R1
Box column drill
year of manufacture: 1998
F9zy8sd
Machine number: 44 303 016
Electronics
With G-control
Equipment:
1x ALBRECHT chuck 3-16 mm
Machine setting elements
The complete operating manual of the machine see PDF.
SPECIAL PRICE: net EUR 2.500
Delivery ex location D-Bayreuth / free loaded truck
Delivery time immediately / subject to prior sale
Payment on completion of purchase, credited to our account without deduction
bore capacity in steel (diameter) 30 mm
throat 260 mm
bore stroke 135 mm
spindle taper MT 3 MK
table: 420 x 350 mm
column diameter 135 mm
turning speeds 125 - 3030 U/min
feeds 0,1 - 0,2 - 0,3 mm/U
total power requirement 1,1 kW
weight of the machine ca. 380 kg.
range L-W-H 0,9 x 0,55 x 2,2 mm
machine base for clamping high workpieces
Digital Depth Gauge
Gearbox swivels 180 °
silent running through geärtete, ground oil-cooled gears
Tapping Function
electromagnetic clutch for drill ...
Automatic drill, drill press, drill press, stand drill, pillar drill
-Automatic drilling machine with rotary indexing table for drilling flange and others
Y2l98l
-spindle taper: MK4
-Transmission:
-Automatic drill with: rapid traverse
-Automatic drilling
-Threading: automatic
-Table size: Ø 700 mm
-Projection: 450 mm
-Spindle stroke: 600 mm
-Speed: 55 - 1235 rpm
-Feed: stepless
-Drive: 2.2/3.5 kW
-Dimensions: 2280/1780/H3000 mm
-Weight: kg
bore capacity in steel (diameter) 30,0 mm
throat 293 mm
bore stroke 140 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 225 - 4.300 U/min
engine output 1,0 / 1,6 kW
column diameter 115 mm
weight 260 kg
Machine height 1.790 mm
** NEW ALZMETALL MODEL RANGE **
7 "TFT - LCD display with touch function:
* Spindle speed setpoint
* Actual speed display
* Integrated drilling depth display
* with touch zero point transfer
* Virtual drilling depth scale in the display
* Machine status displays ...
bore capacity in steel (diameter) 40 mm
throat 300 mm
bore stroke 180 mm
table surface area 615 x 420 mm
0 50- 640 U/min
feed 0,1 - 0,2 - 0,3 mm/U
total power requirement 2,2 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 0,8 x 0,7 x 2,0 m
Bvxold9hml
Pillar drill with
- Thread cutting device
- Feed
bore capacity in steel (diameter) 32 mm
throat 295 mm
bore stroke 140 mm
turning speeds 160 - 2250 U/min
bore spindles - Morse Taper MK 3
table: 375 x 415 mm
Gohteu2qs
column diameter 115 mm
feeds 3: 0,1 / 0,2 / 0,3 mm/WU
weight of the machine ca. 300 kg
dimensions of the machine ca. 1 x 0,7 x 2,1 m
Condition: ready for operation
Electric 380 Volt
Boring chuck 1 - 16 mm
Vice 140 mm
Croll-moving table 640 x 205 mm
pole-changing motor
Stepless turning speed regulation
Special accessori...
bore capacity in steel (diameter) 34 mm
throat 300 mm
bore stroke 150 mm
bore capacity in cast iron 40 mm
column diameter 125 mm
spindle taper: MT 4
spindle feeds: 0,1 , 0,2 0,3 mm/U
table-size 400 x 420 mm
threading: M 33
number of spindle speeds 9
spindle turning speed range 132 - 1852 U/min
total power requirement 1,57 kW
weight of the machine ca. 400 kg
dimensions of the machine ca. 1,1 x 0,6 x 2,3 m
Baw97d
SSTANDARD EQUIPMENT
- auotomech. Speed
- Hardened and ground high quality stee...
bore capacity in steel (diameter) 30 mm
throat 250 mm
bore stroke 130 mm
spindle taper MT 3 MK
table: 380 x 380 mm
column diameter 98 mm
turning speeds 75 - 3200 U/min
feeds mm/U
total power requirement 1,1 kW
weight of the machine ca. 220 kg.
range L-W-H 0,5 x 0,6 x 2,05 mm
machine base for clamping high workpieces
0oiallsr
Digital Depth Gauge
Gearbox swivels 180 °
silent running through geärtete, ground oil-cooled gears
Tapping Function
electromagnetic clutch for drill feed
a...
bore capacity in steel (diameter):31,5 mm
throat:280 mm
bore stroke:120 mm
milling spindle:32 mm
distance spindle nose and table:610 mm
spindle taper::MK 3
speeds::75-3200 rpm
table clamping surface::730 x 210 mm
total power requirement:1,1 kW
Bflbpszene
dimensions of the machine ca.:820 x 720 x 1830 mm
weight of the machine ca.:425 kg
Boring power 32,0 mm
bore capacity in cast iron 40,0 mm
threading M27 / M36
morse taper MK 3 Kurzspindel
spindle stroke 175 mm
throat 320 mm
column diameter 130 mm
feed 0,1/0,16/,025 mm/U
distance spindle/base plate 1210 mm
table: 570 x 475 mm
T-slots 2 x 224 x 14 mm
turning speeds 60 - 1600 U/min
weight 530 kg
range L-W-H 1950 x 570 x 960 mm
Furnishing:
- stepless speed adjustment
- Right / left running of the drilling spindle
- Thread cutting device
- pole-changing motor
- electromagnetic...
bore capacity in steel (diameter) 32 mm
throat 300 mm
bore stroke 150 mm
Paz9t
MK 4
480 x 480 mm
0,1 - 0,2 mm/U
M 22 (St 60)
35 mm
80-1170 U/min
1,45 kW
0,34 t
0,8 x 1,0 x 2,0 m
bore capacity in steel (diameter):32 mm
throat:250 mm
bore stroke:120 mm
tool adaptor:MK 3
Yrolzg
bore capacity in steel (diameter) 35 mm
Bqaepvis
throat 300 mm
bore stroke 150 mm
bore capacity in cast iron 40 mm
column diameter 125 mm
spindle taper: MT 4
spindle feeds: manuell mm/U
table-size 400 x 420 mm
threading: M 27
number of spindle speeds stufenlos
spindle turning speed - stepless 100 - 2000 U/min
total power requirement 3 kW
weight of the machine ca. 260 kg
dimensions of the machine ca. 0,65 x 0,4 x 1,85 m
SSTANDARD EQUIPMENT
- Depth scale and adjustable depth stop
- Automati...
bore capacity in steel (diameter) 60 mm
bore capacity in cast iron (diameter) 70 mm
threading cutting capacity: M50
throat 420 mm
bore stroke 260 mm
spindle taper MK 5
feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
Ibt728q
spindle turning speed range 64 - 1210 U/min
transmission ratio 12 Stufen
column diameter 220 mm
table surface area 600 x 600 mm
total power requirement 4 kW
weight of the machine ca. 0,82 t
dimensions of the machine ca. 0,7 x 1,2 x 2,7 m
Equipment:
- Gears made of hard...
bore capacity in steel (diameter) 35 mm
throat 340 mm
bore stroke 180 mm
tool taper MK 4
turning speed range - stepless 45 - 1400 U/min
feed stepless 0,04 - 0,35 mm/U
motor speeds: 3
table-size 500 x 500 mm
weight of the machine ca. 900 kg
dimensions of the machine ca. 1000 x 500 x 1950 mm
Benrqrpgvw
inkl. working light
function not tested
bore capacity in steel (diameter) 35,0 / 40,0 mm
threading M30
throat 300 mm
spindle 4 MK
bore stroke 160 mm
table: 590 x 450 mm
speeds 100 - 2000 U/min
column diameter 125 mm
distance spindle /table 150 - 700 mm
total power requirement 1,5 / 3,0 kW
weight of the machine ca. 375 kg.
range L-W-H 520 x 850 x 1900 mm
** current new price ~ 11.000 euros
Gfyolwp
Furnishing :
- state-of-the-art production drill press
- mechanical feed 0-300 mm / min. / stepless
- Thread cutting device
- digital s...
bore capacity in steel (diameter) 34 mm
throat 300 mm
bore stroke 150 mm
bore capacity in cast iron (diameter) 40 mm
thread capacity M 27
spindle taper MT 4
spindle speeds: Stufenlos 100 - 2000 U/min
column diameter 125 mm
Vuejmi
automatic feeds 3 / 0,1 - 0,2 - 1,3
table: 400 x 420 mm
Drive Keilriemen
total power requirement 3 kW
weight of the machine ca. 360 kg
dimensions of the machine ca. 2,3 x 0,6x 1,1 m
bore capacity in steel (diameter):32 mm
throat:250 mm
bore stroke:120 mm
N3ak2he2
tool adaptor:MK 3
bore capacity in steel (diameter) 32 mm
throat 250 mm
bore stroke 120 mm
bore capacity in cast iron 35 mm
column diameter 100 mm
spindle taper: MT 3
spindle feeds: 0,1, 0,2 mm/U
table-size 300 x 270 mm
threading: M24
number of spindle speeds 8
spindle turning speed range 65 - 3060 U/min
total power requirement 1,87 / 2,63 kW
weight of the machine ca. 260 kg
dimensions of the machine ca. 0,6 x 0,38 x 2,02 m
SSTANDARD EQUIPMENT
- Depth scale and adjustable depth stop
- Automatic tool ejector...
bore capacity in steel (diameter) 50 mm
bore capacity in cast iron (diameter) 60 mm
threading cutting capacity: M36
throat 400 mm
bore stroke 230 mm
spindle taper MK 4
feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U
spindle turning speed range 54 - 1032 U/min
transmission ratio 12 Stufen
column diameter 200 mm
table surface area 550 x 550 mm
total power requirement 3,0 kW
weight of the machine ca. 0,72 t
dimensions of the machine ca. 0,6 x 1,2 x 2,6 m
Equipment:
- Gears made of hardened a...
Arboga A3808 (badged as Strands S35ME) electronic clutch hi spec machine - unused stock machine made 2013.
Standard Equipment
High quality Swedish Manufactured Machine
Precision ground and hardened gears
Emergency stop on front of head
Bbphnunk
Auto reversing for tapping
Drill guard
On/off reversing switch
No volt and overload release starter
Tool ejector
head raising and table rack and pinion rise and fall mechanisms
Fitted with the following accessories
Lighting
1-13mm drill chuck and ar...
Used Pillar drilling machines 30-39mm bore capacity
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
