Column drill buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Tool holder MK 4 Bbouydkiqa Stepless speed adjustment Tachometer Automatic feed in 3 speeds more
1
Drilling capacity in steel 40 mm Throat depth 350 mm Delivery promptly, subject to prior sale Drilling capacity: 40/45 mm S8t2lnip Thread cutting performance: M 24 Spindle taper: MK 4 Spindeldrehz. (St): 50-1,450 (18) 1/min Spindle feed: 0.1 / 0.2 mm/1 Spindle stroke: 180 mm Spindle nose to table distance: 770 mm Distance spindle-Masch. foot: 1,215 mm Throat depth: 350 mm Stand diameter: 170 mm Table: 560 x 560 mm Machine feet: 730 x 500 mm Length: 940 mm Width: 560 mm Height: ... more
9
Drilling capacity -35mm Spindle taper MT4 Drilling depth 135mm (aut.quill feed) Spindle speeds inf.variable 65-2380rpm Table size 600x460mm 02tswpu With tapping device MARCELS MASCHINEN CH more
9
Clamping surface (left-right): 390 mm Clamping surface (front rear): 420 mm Yrufq8 Control: electronic control Quill stroke: 120 mm Speed range up to: 7500 RPM. Number of gear stages: 2 Chuck: MK 3 Supply voltage: 400 V Mains frequency: 50 Hz Overall height approx.: 1.90 m Approximate weight: 350 kg Accessories: coolant system more
6

ReWer 20 B Column Drilling Machine Rewer 20 B

Mont-Saint-Guibert, BelgiumBelgium dealership location
6275 km
used
Column Drilling Machine Brand: ReWer Model: 20 B Voltage: 380 V, three-phase Clamping vice Dimension dimensions: 63 cm x 85 cm x 180 cm Condition: tested. This item is to be sold via online auction on Auctelia Bcstvqt7b2 more
4

Column drilling machine Gillardon GB16

Essen, GermanyGermany dealership location
6397 km
good (used)
Column drilling machine from a training workshop in very good condition! Manufacturer Gillardon Type GB16 Infinitely variable speed control and 2 pole motor Tachometer Machine base with T-slots Bdr2mdraa more
9
Technical data: -Drilling capacity in steel ST 60 40 mm -Drilling capacity in steel ST 60 55 mm -Spindle mount MT 4 -Spindle hub 180 mm -Throat depth 350 mm -adjustable boring unit lifting 210 mm -height-adjustable table with 2 T-slots 720 x 560 mm -max. Distance from table - spindle 1030 mm -max. Distance worked 1510 base - spindle mm -Column diameter 200 mm -Feeds electromagnetically 0.15 0.2 - 0.3 - 0.36 mm / Rev -with overload protection -AZ gear continuously v... more
5
Drilling capacity in steel 32 mm Projection 280 mm Delivery promptly, subject to prior sale Drilling capacity: 32 mm MK: 4 Necql Throat depth: 280 mm Speeds: 56-2.240 (15) U/min Aut. Feeds: 0.11 0.45 mm/Rev (4). Motor: 2,2 kW Quill stroke: 200 mm Distance spindle clamping surface: 630 mm Spindle throat depth: 280 mm Column diameter: 140 mm Vert. Spindle stock movement: 360 mm Vert. Adjustment of the console with table: 440 mm Horizontal clamping surface: 400 x 316 mm Vertical cl... more
4
We offer a used column drilling machine: Cordia Type S-40 VG MK 4 Built circa 1970? Thread cutting device very solid performance Bcpw93pm83 good condition more


column drill
daily

New machines via email!

Stay updated!
12
Column drilling machine Alzmetall AX 3/SV Manufacturer: Alzmetall Type: AX3/SV Drilling capacity steel (St 60) 40 mm MK 3 short spindle spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm machine table, usable Edition 515 x 360 mm from spindle nose to table min./max. 117/701 mm T-slots, number x width x distance 2 x 14 x 224 mm feed 0.1 + 0.2 + 0.3 mm / Rev Machine height 1840 mm net weight approx. 280 kg Drezahlverstellung stepless SP: -Thread cutting device of incl, f... more
6

Arboga A3808 M Column Drilling Machine Arboga A3808 M

Mont-Saint-Guibert, BelgiumBelgium dealership location
6275 km
2013
used
Column Drilling Machine Brand: Arboga Model: A3808 M Voltage: 400 V, three-phase Power: 1,5 / 1,8 kW Rpm: 1400/2820 Year 2013 Drilling height: +/- 70 cm Dimensions: 50 cm x 70 cm x180 cm Weight: 294 kg Collection and Loading by the buyer No means of lifting on site. This item is to be sold via online auction on Auctelia Bcstyzq08g more
3

Column Drilling Machine VALLI & MERLO VALMER 16

Lonate Pozzolo, ItalyItaly dealership location
6791 km
ready for operation (used)
Drilling capacity : 16  mm Quill spindle travel : 85  mm Spindle taper MT: 2 Working table size : 240x240  mm G9saocnk3 Distance centre of spindel to column : 210  mm Spindle speed : 450÷2600  rpm Number of spindle speeds: 5 Type of transmission : Belt Spindle motor power : 0,38  Kw Weight : 120  Kg more
4
Drilling capacity: 32 mm Chuck: MK 3 Throat depth: approx. 290 mm spindle stroke: 160 mm Bconam02ca Speed, infinitely variable: 220-2900 U/min Feeds: 01 - 0.2 - 0.3 mm / Rev Table size: 620 x 470 mm Motor power: 1,5 kW Approximate weight: 400 kg Color: Green Facilities: stepless speed adjustment 3 feeds Depth stop 180 mm Chuck Röhm supra machining coolant foot pump (Siemens) Engine light Emergency off pushbutton more
1
Drilling capacity in steel 35 mm Throat depth 320 mm Delivery promptly, subject to prior sale Drilling capacity: 35 mm MK: 4 Throat depth: 320 mm Speeds: 75 - 3.010 RPM (8) Feeds: 3 Engine: 1.4 / 2 kW Column diameter: 127 mm Quill stroke: 150 mm Table: 500 x 400 mm maximum distance from spindle nose to table: 820 mm maximum distance spindle base plate: 1,150 mm Length: 550 mm Width: 700 mm Height: 1700 mm Weight: 290 kg Bhx9jan BOHRPOWERFür of the InstandhaltungsbetriebGetrieb... more
4
Column drilling machine SUPER CONDOR type 30 Built in 1981 Drilling capacity 30 mm Spindle mount MT 3 - short sleeve Throat depth 250 mm Pinolhub 120 mm Table size ø 380 mm Column diameter 105 mm Spindle speed 80-900 RPM 8 levels Motor output 0.8 and 1.1 kW Oznntsofb Power supply 380 v, 50 Hz -two engine speeds, four belt levels -Pinolverstellung set to hand crank adjustment -Table height adjustment via hand crank -Clamping surface on the machine foot Dimensions L x W x H 800 x 4... more
10
Column drilling machine Manufacturer ELHA Type 45 Built in 1966 1.5/2.2 kW Table dimensions: 530 mm x 565 mm Throat depth 375 mm Mount MT 3 J0hkvf8 Total height 2,50 m Maximum workpiece height approx. 1,050 mm Drilling depth up to 250 mm Speeds 24 up to 900 RPM. Weight 830 kg With vise Location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. We reserve the right to a sale. There is the w... more
5

Firet Lcn-14 Column drilling machine Firet Lcn-14

Mont-Saint-Guibert, BelgiumBelgium dealership location
6275 km
used
Column drilling machine Brand: Firet Model: Lcn-14 Voltage: 380 V, three-phase Mobile wooden pedestal Size dimensions: 40 cm x 57 cm x 170 cm Condition: tested. This item is to be sold via online auction on Auctelia U7ftvif more
5
Tool holder MK 4 Stepless speed adjustment Bqdvvzpo Automatic feed in 3 speeds more
5
drilling performance in steel 50 mm drill spindle holder MK 4 thread cutting device stroke of sleeve 250 mm Eqblwwt outreach 335 mm 12 spindle speed steps  45 to 850 rpm 9 infeed steps 0.056 to 1.8 mm/rotation stroke of headstock 200 mm adjustment of table height 300 mm table clamping surface 480 x 560 mm cooling liquid device electrical data 380V / 4.1 KW space required height - 2,350 x width - 900 x depth - 1,100 mm solid steel plate under machine foot 1,000 x 1,200 mm weight ap... more
1
Drilling capacity in steel 50 mm Throat depth 360 mm Delivery promptly, subject to prior sale Drilling capacity: 50/55 mm MK: 4 Throat depth: 360 mm Speed: 52-1400 (12) U/min Feeds: 0.1 / 0.2 / 0.3 / 0.4 mm / Rev Motor: 3 kW Thread cutting performance: M30 Spindle stroke: 240 mm maximum distance spindle nose to table: 585 mm maximum distance spindle-Masch. foot: 1.170 mm Stand diameter: 180 mm Bkxlbix Table: 580 x 460 mm Machine feet: 445 x 435 mm Length: 950 mm Width: 680 mm ... more
6
Column drilling machine blood HARDT type 4BA Pcohtrrke Engine No. 9123 built circa 1968 Drilling power 40 mm Spindle cone MK 4 - long sleeve Throat depth 290 mm Pinolhub 200 mm Table size ø 500 mm Column diameter 155 mm Spindle speed 112-1120 RPM 6 levels Feed rate 0.08 - 0.12 - 0.24 mm / U 3 levels Motor output 1,5 kW Power supply 380 v, 50 Hz -6 speed 3 gears and two switchable during transmission levels = -Clamping surface in the tool's base 400 x 400 mm -Table height adjustmen... more
2
Column drilling machine Alzmetall Type: AX3S BJ. 1978 Recording MK3 160-1125 U/min stepless speeds. Clamping surface approx. 420x400mm. Quill stroke 120 mm. Coolant system. Power: 400 Volt 1.00 / 1,3KW Space required: B 55 cm D 85 cm H 180 cm weight approx. 250 kg Bcndlk9och more
7
Column Drilling machine Fabr ALZMETALL Type AB 45 S in Like new condition. Mach nr 1617 Mudjas Technical data: - Drilling capacity in steel 60 40mm - Max. drilling capacity 55mm - spindle speed variable 50 up to 1280 rpm. - Table size 560 mm - spindle taper MT4 - throat 350 mm - Column diameter 200 mm - aut feeds 0.06-0.12-0.18–0,22mm / rev - quill stroke 160 mm - Weight 650 kg more
4
Tool holder MK 4 Stepless speed adjustment Bb7wbbuwc7 Automatic feed in 3 speeds more
2
TECHNICAL DATA 3afmxm3b Drilling power 35 mm Recording MK3 Speed range 100-2,500 min-1 Number of levels 10 Autom. Feed 0.05, 0.20, 0.10 mm / Rev. Throat depth 300 mm Table size 600 x 350 mm Table range 0 ° to 90 ° Machine weight approx. 700 kg EQUIPMENT/ACCESSORIES  automatic feed  Swivel table  Machine light  Preparation for coolant supply  1-13 mm Collet Chuck RÖHM more
5
Drilling capacity: 16 mm Column diameter: 85 mm Quill stroke: 100 mm Projection: 180 mm Table size: 310 x 280 mm Dimensions: 350 x 750 x 1050 mm Weight: 108 kg The machine is in very good condition. A visit under current is possible in our showroom at any time. All information without guarantee. Hg7xncgz0 more
6
Column drilling machine ALZMETALL type 3 ESV Masch. No. 16405 built 1978 Drilling capacity 32 mm Spindle mount MT 3 - short sleeve Throat depth 285 mm Pinolhub 160 mm Table size 500 x 370 mm Column diameter 120 mm 130-1750 RPM infinitely variable spindle speed Motor output 1,5 kW Power supply 380 v, 50 Hz. Fwzkls8jc -Spindle speed about 2 reduction stages and infinitely various gate gear -Transmission level for high torque at low speeds -automatic feed 0.1 - 0.2 - 0.3 mm / Rev -Co... more
1
Column drilling machine Fabr. ALZMETALL Type 45s Masch. # 154 built 11/1970 Technical data: Drilling capacity in steel St 60 40 mm Drilling capacity in casting 55 mm Bcqc78szo8 Drilling capacity in St 60 55 mm Spindle mount MT 4 stepless speed 50-1280 RPM. 3 automatic feeds 0.1 / 0.2 / 0.3 mm / Rev Quill stroke 180 mm Throat depth 350 mm Column diameter 200 mm Bryht Table size 710 x 560 mm Table stroke 550 mm Power 3,1 / 4HP Dimensions L x W x H 800 x 1200 x 2070 mm Weight 77... more
8
Drilling capacity -35mm Spindle taper MT4 Drilling depth 170mm (aut.quill feed) Spindle speeds inf.variable 40-710rpm Bcdavekxto Table size 450x450mm With integrated vice MARCELS MASCHINEN CH more
4
Spindle retainer: MK4 greatest distance spindle nose to table: 710 mm Maximum drilling diameter ST60: 25 mm Throat depth: 315 mm Table area: 450 x 560 mm Height of the head: 280 mm Feed: 0.08 1.25 mm / U in 9 steps Spindle speed: 63-1000 RPM in 9 steps Nfayp Engine power: 2,2 kW (power rating: 2.4 kW) Dimensions L x W x H: 700 x 1250 x 2650 mm weight: 1000 kg Price on request! more
6

Column drilling machine drill press Flott SBM3 SB23

Essen, GermanyGermany dealership location
6397 km
1987
excellent (used)
Vertical drilling machine afloat in very good condition from a training workshop. Speed control of belt apportionment 5 speeds Tool holder MK2 9acc2bksg Table of rack height adjustable more
3
Spindle mount MT 3 infinitely variable speed control Vuxah8e more
6
Column drilling machine FLOTT type SB M3 Masch. No. 38 203 051 year 1992 Drilling capacity 25 mm Spindle mount MT 3 Throat depth 260 mm Pinolhub 120 mm Table size 400 x 320 mm Column diameter 100 mm Spindle speed 400-4000 RPM 6 levels Motor power 1 kW Power supply 380 v, 50 Hz Bnwx8ur -Spindle speed 6 v-belt levels -Drilling table height adjustment via hand crank -Drilling depth stop Dimensions L x W x H 850 x 400 x 1800 mm Weight 250 kg good condition more
4

Column drill ALZMETALL AB 3 ES (MK 3)

More Alzmetall Ab 3
Staufenberg, GermanyGermany dealership location
6563 km
good (used)
Column drilling machine Fabr. ALZMETALL type 3 Fabr. # 19366 technical data: Drilling capacity in ST 60 28 mm Drilling capacity in GG 20 35 mm Drilling capacity in ST 60 35 mm Table size 400 x 300 mm Projection 293 mm Column diameter 115 mm Spindle mount MT 3 Spindle speed continuously in 4 groups by pole-changing motor and gear unit variable 55-1450 RPM. Vtrzkgjpi Quill stroke 160 mm Motor 0.9/1,3 kW Feed by hand External dimensions approx. 500 x 1000 x 1880 mm Machine Green ... more
6
Flott column drilling machine Type SB P40 STG PV electronic Duration / ALB ear power 35/40 mm Thread cutting attachment, cutting capacity Max M30 Spindle MK4 continuous, programmable feed rate (0-4 mm) digital feed display programmable drill depth stop with fine adjustment infinitely variable speed range 70-1400 RPM. Digital drill depth and speed display Spindle stroke / drilling depth 160 mm Throat depth 300 mm Kombibohrtisch with vise Table height adjustment Three-phase motor, pol... more
13
Column drilling machine Maxion Unimax 3 Manufacturer: Maxion Type: Unimax 3 Condition: ready to use Dauerbohrleistung e 335 25 mm Standard ALB ear performance 30 mm Thread cutting performance M 20 Spindle MK 3 Drilling depth 125 mm Throat depth 260 mm Distance spindle to table top 90 to 840 mm Table surface 500 x 365 mm Column diameter 110 mm Total height 1,855 mm Weight 250 kg Tnggbwu Motor pole changing bar 0.8/1.5 kW Infinitely variable spindle speeds range A 80 - 1,440 min-1... more
6
Chuck: MK 3 Gr. Bohrlstg. in St.: approx. 28 mm Gvaee987e Speed range: up to 1700 RPM - infinitely variable Table size: 420 x 380 mm Throat depth: 300 mm Stroke: 160 mm Total power: 1,5 KW / 380 V / 50 Hz Machine weight: 300 kg Equipment / Accessories: Automatic drill feeds 0.10 0.16 0.25 mm / U stepless speed control Machine lamp Keyless drill Chuck Röhm supra 1-16 mm Other: In the front plate 3 cover buttons - s are missing photo. The machine runs something rough. more
6
Column drilling machine Gillardon type GSB 32 V Masch. No. 511757 built in 1972 Drilling capacity 32 mm Mount MT 4 - long sleeve Throat depth 350 mm Pinolhub 170 mm Table size 405 x 405 mm Column diameter 140 mm 50-450 RPM infinitely variable spindle speed 100-900 U/Min stepless 100-750 U/Min stepless 200-1500 U/Min stepless 27a2ty0eb Engine power 1,1 / 1,5 kW Power supply 380 Volt 50 Hz - automatic feed approx. 0.1 0.16 0.25 mm / U 3 levels -Spindle speed about 2 engi... more
6
Column drilling machine Fabr. SOLID type B-23 Fabr.# 514494/ 132401 with pneumat. Feed Technical data: Spindle mount MT 3 Drilling capacity approx. 23 mm Throat depth 300 mm Saeulendrm. 120 mm Table size 330 x 280 mm Size of the base plate 400 x 370 mm 12 spindle speeds 100-2250 RPM Power 1.3 / 2.5 PS with: -pneumtischem drill bit feed -pneumatic indentation of the feed -Emergency / off 2fjfbwim used, in good condition more
6
CNC kolomboormachine Alzmetall AC 25. Motor 1,5 Kw, in 2 trappen 75-5800 omw/min. Automatische voeding, 1-3500 mm/min. Nerax MK3, spilkop 43mm, spilslag 120mm, diameter kolom 115mm. Tafel-spanoppervlak 390x420mm. Tafelbeweging 668mm, max afstand spil-tafel 668mm. Afstand spil-bewerkte grondplaat 1108mm. Hoogte van machine 1990mm, gewicht 380 kg. Machine werkt prima, met alle papieren en documentatie erbij. more
6

Column drilling machine Alzmetall AB 35 S

Makow Podhalanski, PolandPoland
7275 km
1989
excellent (used)
Motor pole shift bar capacity St60 - 35 mm; Casting - 40mm. Spindle retainer MK4. Spindle stroke - 160 mm. Speeds - 2 x 2 continuous 130-3500 RPM. Feeds - 0.10, 0.20, 0.30 mm / Rev. Nwksmp2z Coolant system. Column diameter - 150 mm. Table size 500 x 380 mm. Throat depth - 300mm. Weight 500kg. more
4
 Start Chat

Column drilling machine KAPEMA ZY 5050 A

Flensburg, GermanyGermany
6395 km
2009
excellent (used)
Column drilling machine KAPEMA MOD: ZY 5050 A BU: 2009 Cone mount - MT 4 12 x spindle speeds of 52-1400 RPM Drilling capacity - 50 mm Gewindbohrleistung - M 30 4 x automatic drill feeds Electromagnetic clutch with reverse gear automatic shut-off W8gyybet motorized table height adjustment Swivel table Coolant system, halogen - light. Weight 670 kg. Height - 2500 mm more
3
Motor pole changing bar 1.0 / 1.6 kW Full motor protection against therm. Overload Engine speed 700 / 1400 R/min Spindeldrehz. I 65 240 / 240-875 RPM II 130-480 / 480-1750 RPM Short spindle MK 3 Spindle stroke 160 mm Throat depth 300 mm Combined drilling table with Einschiebeschraubstock, Jaw width 125 mm, span 130 mm with round table Ø 450 mm Feed 0.1 / 0.2 / 0.3 mm Bcmvngph9o Column diameter 145 mm Thread cutter with foot switch Comprising A coolant sys... more
6
Column drilling machine WEBO type Gradua 50 Built in about 1980 Drilling capacity 50 mm Spindle cone MK 5 - long sleeve Throat depth 360 mm Pinolhub 240 mm Table size 560 x 560 mm Column diameter 240 mm Spindle speed 40-900 RPM 8 levels Feed 0.12 - 0.19 - 0.26 - 0.4 - 0.5 - 0.76 1.10 - 1.70 mm / U 8 levels Motor power 4 / 5,5 kW pole changing bar Power supply 380 v, 50 Hz -Spindle speed through the 2-speed motor and gear unit 4 -Motor speed level I and II for clockwise and countercl... more
6
Single column coordinates drill Fabr. WMW Mikromat type Kamboj 400 x 630/1 Masch.# 1203.1444 for individual, small and medium series production of high-quality gauges, devices Tools and workpieces with narrow tolerance requirements Technical data: Table size 630 x 400 mm Table feed 63 / 160 / 400 / 1000 mm / min 19 spindle speeds 45-2800 RPM. Spindle feed 0.014 - 0.5 mm / Rev Spindle stock feed 0.006 - 0.22 mm / Rev Spindle stroke 100 mm U9ii0 Spindle diameter 80 mm Tool holder MK... more
3
 Start Chat

Column drilling machine IBARMIA AZ-32V

Schwabach, GermanyGermany
6755 km
2004
good (used)
Drilling capacity 32 mm Spindle mount MT 3 Engine capacity 1.4 kW Bcmtxr2tj0 . 2 automatic feed 0.1 + 0.2 mm / Rev Speed infinitely variable from 80-1170/RPM . Facilities: -Feed device -Coolant system -EMERGENCY stop button -Thread cutting device . More data as per offer! more
3
cutting device. Drilling capacity St60 - 30 mm; Cast - 32mm. Spindle retainer MK3. Spindle stroke - 160 mm. Speeds - 2 x 2 continuous 50-1500 rpm. Feeds - 0.10, 0.20, 0.30 mm / Rev. Column diameter - 150 mm. Table diameter - 400 mm. Projection - 290mm. Weight 400kg. more
6

Column drilling machine Gillardon GB 50 V

Mindelheim, GermanyGermany dealership location
6785 km
good (used)
Chuck: MK 4 Drilling capacity: 65 mm Speed range, infinitely variable: 35-950 RPM Quill stroke: 200 mm Feeds: 0,1; 0.16; 0.25; 0.4 mm / Rev Table size: 700 x 600 mm Throat depth: 355 mm Engine power: 2.2 / 4.0 kW Power supply: 400 V Approximate weight: 800 kg Glu3vol Facilities: Feed stepless speed adjustment Pole-reversible motor Machine lamp machined base with coolant system Drilling depth stop 200 mm Drill Chuck Foot switch Emergency off pushbutton Speed display more


column drill
daily

New machines via email!

Stay updated!

to

to

Edit search
COLUMN DRILL
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close