Used Column Drill for sale (9,416)

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Iedpfxoxu H T Do Agzebf Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Condition: good (used), functionality: fully functional, throat depth: 250 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 300 rpm, drilling capacity: 18 mm, column diameter: 100 mm, stroke length: 100 mm, spindle mount: MK 2, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used column drilling machine SB 16 ST manufactured by Flott. Model: SB 16 ST Drilling capacity (steel, Ø): 18 mm Spindle taper: MK 2 Drilling stroke: 100 mm Spindle outreach: 250 mm Column diameter: 100 mm Distance spindle / table, min. 140 mm, max. 790 mm Automatic feed: 0.10 / 0.16 / 0.25 mm/rev Speed range (rpm): 300 – 2800 rpm Connected load: 1.0 kW Machine weight: approx. 180 kg Note: The above technical data were taken from the operating manual, manufacturer’s brochures or other sources. We therefore cannot guarantee their accuracy or completeness. Scope of delivery: 1 used Flott SB 16 ST column drilling machine, without vise Application area and condition: The machine was sporadically used in a factory workshop for repair work and manufacturing spare parts for our own machinery fleet. The machine is fully functional and in good condition. Ibsdpoxtxgtsfx Agzjf We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), - MK4 - Automatic feed - Variomatic - Rotates clockwise and counterclockwise - Cooling - Machine vise Ibjdpfx Aoxc N T Aogzsf - Lighting - 380V

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity 15/18 mm (in E335/St60) 17 Nm Tapping capacity M12 (pitch-dependent) Spindle taper MK II Drilling depth 70 mm Throat 220 mm Max. distance spindle/work surface: 750 mm Column diameter 70 mm Usable work surface W x L 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: adjustable stop ring Feed: manual Table height adjustment: hand crank/rack and pinion Motor, three-phase 230V with Quefren frequency inverter: 0.75 kW Spindle speed: 40–4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Optional Accessories Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €490.00 Factory warranty: 3 years Ibodpoxgdn Aefx Agzjf Free delivery including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT DISTRIBUTION PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Ijdpev Iqqdefx Agzsbf

Condition: like new (used), CNC: FAGOR 8055 (retrofit option with Heidenhain Tnc640) Spindle diameter: 110 mm Tool holder taper: ISO 50-7388/1 - DIN 69871 Milling arbor mounting diameter: 221.44 mm Tool clamping force: 1,600 daN Travel Spindle horizontal stroke (Z-axis): 550 mm Spindle vertical stroke (Y-axis): 1,500 mm Table traverse stroke (X-axis): 3,000 mm Column longitudinal stroke (W-axis): 1,300 mm Table Size: 1,500 x 1,220 mm Maximum load capacity: 4,000 kg Max contouring torque: 250 daN T-slots: No. 7, 22 mm, H7 Isdexukfqjpfx Agzobf Rapid table rotation: 3 rpm Table clamping torque: 674 daN Speeds and feeds Spindle motor power: 22 kW Speed ranges: 2 Max torque low range: 105 daN Max torque high range: 31 daN Spindle speed range: 15 - 3,000 rpm Constant torque, low range: 15 – 203 rpm Constant torque, high range: 50 – 680 rpm Constant power, low range: 203 – 895 rpm Constant power, high range: 680 – 3,000 rpm Working feedrates: 2 – 10,000 mm/min Rapid feedrates: 10,000 mm/min Maximum axis thrust: 1,600 daN Tool magazine Number of tools: 60 Chain pitch: 140 mm Max tool diameter: 138 mm Max tool diameter (adjacent pockets empty): 400 mm Max tool length (excluding taper): 400 mm Max allowable tool weight: 30 kg Tool holder taper: ISO 50-7388/1 - DIN 69871 Overall weight: 24,500 kg Machine dimensions (L x W x H): 5,350 x 4,770 x 3,700 mm Machine equipped with: • Brushless motors • Through-spindle coolant • Quill stiffener • Heidenhain linear scales • Operation and maintenance manuals

Condition: excellent (used), Pillar Drill Brand Ixion Type BS 30 MK 4 Spindle Mount Table Size 550 x 405 mm Infinitely Variable Speeds from 16 - 2800 rpm Thrust 280 mm T-Slot Width 16 mm Vise 150 mm BB Drill Chuck 3-16 mm 380 Volt Depth 1000 mm Width 720 mm Height 1950 mm, with pallet 2060 mm Isdpev S Akqefx Agzobf

Condition: used, Year of construction: 1970, Webo Gradua 40 Column Drilling Machine Details: Drilling capacity in steel (diameter): 40 mm Iodpfx Agjxq S Irozjbf Throat: 360 mm Drilling stroke: 240 mm Tool holder: MT 4 Speeds: 56 - 1250 rpm Drill motor: 2.0 / 2.4 kW Feeds: 0.12 - 0.19 - 0.26 - 0.4 mm/rev Table size: Ø 625 mm Column diameter: 240 mm Drill head vertical adjustment: 400 mm Total power requirement: 2.5 kW Space requirement approx.: 1.1 x 0.8 x 2.3 m Machine weight approx.: 1100 kg Control: conventional The machine was in operation until dismantling. Pickup in 75053 Gondelsheim. Forklift available for loading. Shipping by freight carrier possible; please inquire with your postcode.

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function – Protective cover Ibodjxq Rwfepfx Agzef – Emergency stop switch – 40V

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Ijdpfxsxd Tt As Agzjbf Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: used, Year of construction: 1975, Make: Oradea Infratirea Type: G 16 Machine number: 4966 Year of construction: 1975 Ijdpernrpvefx Agzobf Drilling capacity: 30 mm Spindle holder: MK 3 Speed range: 150 to 2,360 rpm Feed rate: yes (defective) Table: 490 x 390 mm Clamping surface: 400 x 300 mm throat depth: 285 mm Quill stroke: 160 mm Headstock adjustment: 200 mm Table adjustment: 350 mm Footprint: 500 x 830 mm Connection: 1.65 kW Equipment: Thread cutting device Condition: good, feed defective Weight: 0.7 t Dimensions: 500 x 830 x 2,100 mm

Condition: ready for operation (used), ERLO TCA-40 Drilling capacity in steel, diameter 40 mm (max) Throat 3depth 60 mm Isdpfou Hyc Dex Agzjbf Stroke for drilling 200 mm Max threaded diameter M33 Spindle taper MT4 Diameter of column 175 mm Spindle speeds min/max 61/1169 rpm Dimensions of table 550x550 mm Ready for production!

Condition: good (used), Machine 1 pictures 1-5 Alzmetall AB 40 SV Price 9500,-€ drilling capacity : 45mm Spindle : MK 4 Isdpfeu Nm Tbox Agzjbf Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2,4KW Machine weight approx. 500kg Machine 2 pictures 6-12 Weipert SBM 49 Price 4.250,-€ drilling capacity 40mm table 560x560mm quill stroke 180mm Spindle MK 4 Speed 50-1450 rpm Steps 12 Feed rate 0.1-0.2 H8Vxu2W Spindle table 770mm throat 350 mm Motor 1.5 KW Thread cutting device pictures 13-16 Gillardon GB 40 VE Price 3.690,-€ Year of construction: ca.1988 L x W x H: approx.630x985x2020mm Weight: approx. 620kg Drilling capacity ( steel ): approx.40mm Drilling capacity ( cast iron ): approx.50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, stepless: 60-1600 rpm Table clamping surface: approx. 640x530mm Feed range: approx. 0.1;0.16;0.25 mm/rev

Year of construction: 1965, condition: used, Drilling diameter 30 mm total power requirement 0,74 kW Machine weight approx. 0.35 t drilling capacity in steel (diameter) 30 mm throat 300 mm drilling stroke 120 mm mounting MK 3 table surface 335 x 280 mm groove width 14 mm table adjustable in height 510 mm distance spindle/table max. 120 - 630 mm column base area 380 x 400 mm distance spindle / base plate 1160 mm Iodjm Sg Tbspfx Agzjbf Speed range - drilling 200 - 2500 rpm speed steps working spindle 4 column diameter 100 mm machined base plate: Yes table rotation approx. 180 ° space requirement approx. 0,9 x 0,4 x 1,9 m Control conventional

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Iodpfegulr Hox Agzjbf Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Isdpexd Ttpefx Agzjbf Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: good (used), functionality: fully functional, Data : Ibjdpfoxpqwcex Agzef Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Ijdpfoxl Hpaox Agzebf Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Ijdpfx Agep Duagszsbf Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, Year of construction: 2025, Power: 750 W / 400 V Isdpfeir Embjx Agzobf Drilling capacity in steel: 25 mm Speed range: 60 – 3050 rpm Spindle taper: MK3 Quill stroke: 95 mm Spindle reach: 209 mm Table size: 308 mm x 308 mm Quick-action chuck: 1 – 16 mm Weight: 107 kg

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: Ibjdpfx Agoxd Trlszsf - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Ijdpfsxd Trfsx Agzobf Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED - Thread cutting device - Coolant device B Available immediately from stock

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Ijdpfx Asxd Tp Dsgzsbf Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Ijdjxd Tpwopfx Agzsbf Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Ibsdpfx Asxd Tlxegzsf Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300