Used Column Drill for sale (8,565)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Vertical Turret Lathe - Double Column Brand: WALDRICH SIEGEN | Year of construction: 2018, commissioning: 2019 High-performance turning and milling unit with a modular design system for optimal adaptation to customer requirements. Fully hydrostatic guidance of all main axes for the highest cutting performance and precision. Main structural components made of high-performance cast iron for the best damping characteristics and high stiffness. Condition: Ready for use / operational. The machine can be inspected by appointment. Total operating hours: 65.432 h TECHNICAL DATA: Portal, passage width: 6.000 mm Travel distances: - Horizontal support (X1/X2 axis): 5.160 mm - Spindle slide vertical (Z1/Z2 axis): 2.000 mm - Distance X1/X2 (centre of spindle): min. 2.100 mm - Crossbeam vertical (W axis): 1.800 mm - Horizontal measuring device (X3 axis): 7.065 mm - Vertical measuring device (Z3 axis): 2.350 mm Faceplate: - Clamping surface diameter: 5.000 mm Rotary table: - Drive power: 2 x 110 kW - Number of gear stages: 2 Support Spindle drive: - Spindle drive power: 63 kW - Number of gear stages: 2 - Speed range stage 1: 0 - 600 rpm - Speed range stage 2: 0 – 3.000 rpm Spindle carriage: - Cross-section: 400 x 400 mm Electrical: - Total connected load: approx. 361 kVA Pgodpfxoynbxcs Aklsp EQUIPMENT: - Two rotary and milling supports - CNC-Control: SINUMERIK 840D sl - External and internal cooling lubricant supply - Chip conveyor (belt filter) - Extraction and filter system, Keller Vario - Workpiece measuring probe: Renishaw, RMP 60 - Additional accessories ... No guarantee is given for the completeness and accuracy of the technical data and equipment. Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm Pedpoznvibofx Aklegp 23726

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face Pgjdpjzn Ah Rjfx Aklop - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Pgsdper U St Ujfx Aklop Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Psdpfju Tln Nsx Akljgp Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Pjdpfx Aeiy Ekvsklsgp Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Pgodpfx Akshik Ezelop Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Psdpfx Aoghtvaoklsgp Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel Pgjdpfx Akexcgtgjlop - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Pjdpfor D T U Dex Aklegp Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: good (used), Year of construction: 2018, Burn-and-drill system Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of construction: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carts: 2 with clamps NC feed cart, positioned on the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute into a material collection container for unloading small parts. Filter unit including piping High-performance for the use of carbide tools. For drilling, tapping, marking, milling, Psdpfx Akjvzrczolegp plasma cutting of flat steel and sheet metal. Software options for milling and scoring LANTEK license 22726ä Availability: immediately!

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Pedpfx Akew I Uy Tslogp Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain TNC 7 Water-cooled inline motor 43 kW / 900 Nm Travel distances: X = 8,000 Y = 3,200 Z = 1,600 Milling heads: 0.001° x 0.001°, 6,000 rpm Additional equipment: Tool changer for 60 tools 1 chip conveyor Selectable NC tables Plate fields Carousel rotary tables Optional: Fully automatic milling head change system Pjdpfx Akeqy Hinslegp Pendulum machining Splash guard enclosure Operator support technology packages

Condition: used, functionality: fully functional, mount diameter: 10 mm, spindle speed (min.): 6,000 rpm, spindle speed (max.): 12,000 rpm, table length: 1,130 mm, table width: 250 mm, – Italian production TECHNICAL SPECIFICATIONS: - Number of spindles: 8 - Number of units: 4 - Unit motor power: 4 x 1 kW - Adjustable angle of end units: 0° - 20° - Mechanical oscillation - Oscillation motor power: 0.37 kW Psdpfex Npimjx Aklogp - Max. oscillation length: 100 mm - Oscillation speed adjustment - Independent unit oscillation - Basket diameter: 10 mm - Distance between outermost spindles: 1170 mm - Min. distance between units: 84 mm - Spindle speed: 6000 / 12000 RPM - Unit height adjustment - Unit width adjustment - Table dimensions: 1130 mm x 250 mm - Table height and depth adjustment - Three pneumatic clamps - Inverter power: 4 kW - Connector diameter: 2 x 100 mm - Machine dimensions (L/W/H): 235 / 165 / 200 cm - Weight: ~ 1750 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Pgedpfxeq Ii Dlo Aklsp - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Pedpfx Akjxwaz Helsgp

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Pgodpsxnlflofx Aklep

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN Psdpfxjznn Upe Aklegp max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm Pjdpfxjvwgqro Aklsgp table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. Pgsdevmtlhepfx Aklsp - Height adjustment and cross adjustment must be repaired

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). Pgedpfxev Aalyj Aklop - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm Pgsdpfxjzmixms Aklsp feed ja m/min weight of the machine ca. 1,1 t

Condition: used, Year of construction: 1977, stroke 300 mm Pjdpfx Aozmixgeklsgp

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: Podpfet Uzk Rox Akljgp - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Boring bar Bar diameter: 180 mm Overall length: 2500 mm Weight: 920 kg Pgedpfx Akjum Uzgjlep Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel