Used Special Drill for sale (14,041)

Condition: excellent (used), Drilling heads – special gearboxes for Nottmeyer, etc. various drilling heads Dwsdpegrkmvsfx Ab Nec

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units Dwsdpfx Abonvdmwj Nec rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to 1 switch cabinet 1 coolant tank

Condition: used, machine/vehicle number: 231500079, -WT 108- Offered here is a table drilling machine and special drilling unit. Dwodpfolf Ezwox Ab Njc Bench drill: - 5 speeds via pulley - throat / stroke: 10cm special drilling unit: - pneumatic clamping device - automatic feed

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Dodowuz Dgspfx Ab Newc

Year of construction: 1983, condition: used, machine/vehicle number: 7180793, Manufacturer: SAS-Zadar Model: SS Year of manufacture: 1983 Weight: approx. 4,000 kg Machine no.: 7180793 General / Technical Data: Special-purpose drilling machine for drilling holes in the lateral surface of cylindrical workpieces Dodpfxewylwze Ab Nswc Drilling units: 8 units Feed system for drilling units: hydraulic feed via quill Drilling heads: interchangeable multi-spindle heads Workpiece diameter: approx. Ø30 to Ø40 mm Workpiece length: approx. 80 to 100 mm Workpiece clamping: hydraulic Cutting speed: hydraulically variable, stepless adjustment Machine dimensions (W x D x H): approx. 2,600 mm x 2,600 mm x 1,750 mm (excluding working area) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine designed for mass production • Equipped with a sturdy machine table with chip disposal through the underside of the table center • Drilling heads are interchangeable • Machine does not have an indexing table Remarks: The machine is exclusively designed for high-volume production. The machine is in its original paint and available for inspection at our warehouse.

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Dwjdetwzk Dopfx Ab Noc DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control Dsdoy Ipy Aepfx Ab Newc • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 1996, functionality: fully functional, Alzmetall AX3 SV Pillar Drill Manufacturer: Alzmetall Type: AX3SV Year of manufacture: 1996 Condition: good, used Speed range: 160 – 2250 rpm Drilling capacity (St60) 40 mm Chuck/tool holder MK 3 Spindle stroke 120 mm Overhang 293 mm Column diameter 115 mm Dwedpfezy N Egjx Ab Nec Distance spindle-table min./max. 117 / 701 mm Feed rate 0.1 + 0.2 mm/rev Net weight approx. 270 kg Special equipment: - Automatic feed - Spindle guard

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) Dsdpfx Aez Nyvyjb Njwc - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. Dwodpfx Abezt H Nve Nec 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured. Djdpfez Hb U Rjx Ab Nowc

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Weight 45,000 kg. Delayed removal unit will be ready for removal by the end of September. Dodpfxez Hc Npo Ab Nswc Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump Dwsdpfx Aextu D Ueb Nec • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Djdpfx Aboy S Auue Nswc Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: good (used), Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Djdpfxeuwdnxj Ab Njwc Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weight kg 1200 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V Dwedpoy S Atkjfx Ab Nec - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16 Dedpfewuz Ekex Ab Newc

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Dedez Ekggjpfx Ab Newc EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: good (used), Year of construction: 2005, machine/vehicle number: PRJ035402, functionality: fully functional, spindle mount: MK 4, total width: 450 mm, total length: 720 mm, total height: 1,861 mm, table width: 370 mm, table length: 500 mm, overall weight: 510 kg, We offer this well-maintained ALZMETALL AB 40/SV pillar drilling machine, manufactured in 2005. Manufacturer: ALZMETALL Model: AB 40/SV Year of manufacture: 2005 Condition: good Serial number: PRJ035402 Djdpfx Ajz Nd Slob Njwc Drilling capacity in steel St60: D40 mm Drive: Continuously variable with a 2-speed gearbox Spindle speed: 70-4000 rpm Tool holder, short spindle: MK4 Overhang: 300 mm Column diameter: 145 mm Spindle stroke: 160 mm Feeds: 0.1/0.2/0.3/0.4 mm/rev Table clamping surface: 500 x 370 mm Max. table load: 160 kg Distance spindle-table min/max: 147/688 mm Distance spindle-base plate (top edge): 1162 mm Distance spindle-base plate (bottom edge): 1267 mm Base plate (unmachined): 720 x 450 mm Machine height: 1861 mm Weight approx.: 510 kg Space requirement approx. (L x W): 720 x 450 mm Technical data without guarantee. Errors and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. Djdpfx Absz I Tahs Nowc The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Djdpsvvi I Refx Ab Nowc

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Dodjrtrx Ropfx Ab Njwc Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: ready for operation (used), Year of construction: 1985, Available for immediate pickup at our location: Radial drilling machine TOA Type TRD 1000 F Dwodpfx Ajz I Nkveb Nec Year of manufacture 1985 Outreach 1000 mm Installation height 800 mm Taper shank MK 4 Spindle speeds 50 – 1230 rpm Drive power 4 kW Rotary table Vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm Djdpfx Abshzbipj Nowc - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Dwodpfez Nxnhsx Ab Noc Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T