Box column drilling machine for sale
Identified location: Ashburn (US) (Edit)
6
1989
used
Box column drill, pillar drilling machine ORADEA INFRATIREA type GVM 6A
machine No. 659 Year of construction 1989
Drilling capacity 50 mm
Spindle holder MK 5
Throat 380 mm
Pinol stroke 200 mm
Table size 700 x 645 mm
distance drilling spindle to machine table max. 900 mm
Spindle speed 31,5 - 1400 rpm. 12 levels
Bhgqlmz0kd
feed 0.08 - 0.8 mm/rev. 6 steps
Engine power 4 KW
Power supply 380 Volt, 50 Hz
- 12 gear steps mechanically switchable for spindle speed
- 6 gear steps mechanically switchable ... more
6
2013
excellent (used)
A Maxion BS 25 STG is offered from a vocational school
Year of construction 2013
Thread cutting function
Digital speed display
Speed range 95-1740u/min
infinitely variable speed adjustment
2 step motor
Bhs9fbxiii
MK 3 recording
120mm pinol stroke
Throat 260mm
Table clamping surface 270x400mm
quick chuck Röhm 3-16mm more
5
1984
good (used)
box column drill Alzmatall automatic drilling machine
Bhozegoe0r
Type: Abomat 35
year 1984
Recording MK4.
Speeds 56 - 2500 U7min.
Feed rate: 0.04 to 0.40 mm/min (8 steps).
Clamping surface 560x450mm.
Distance table - spindle max. 850mm.
Projection 330mm.
Drive motor power: 5.5 kW.
Required space: L 130cm, W 93cm, H 250cm, weight ca, 1500kg. more
7
2013
excellent (used)
A Maxion BS 25 STG is offered from a vocational school
Year of construction 2013
Thread cutting function
Digital speed display
Speed range 95-1740u/min
infinitely variable speed adjustment
2 step motor
Bhs9fbxiii
MK 3 recording
120mm pinol stroke
Throat 260mm
Table clamping surface 270x400mm
Dndvzyw3e more
8
1995
good (used)
Offered from an insolvency is a box column drill
Manufacturer Arboga
Model A 4008
Year of manufacture 1995
Machine no. 329342
Technical data:
Speeds 90-1500 rpm
MK 4 recording
Pinol stroke 200mm
Projection 330mm
table clamping surface 405x330mm
Bikpebqu2o
380 volts
1,5KW Power
Height of the machine ca.2060mm
Röhm quick chuck 1-13mm
Operating Instructions
Weight 350kg
Transport possible at extra charge more
8
1991
good (used)
Manufacturer Ixion
Model BS 23 AVSTG
year of manufacture 1991
Machine No. 144574
Technical data:
automatic feed 0,1/0,16/0,25
Thread cutting function
pole-switchable motor
Speed adjustment infinitely variable 80-1400 rpm
Work light
Fgdlxxgl
Throat 260mm
Pinol stroke 120mm
Recording MK 3
Quick acting chuck Albrecht 3-16mm
table clamping surface 400x270mm
height of the machine 1800mm more
8
1987
good (used)
Manufacturer Alzmetall
Model AB 45 S
year of manufacture 1987
Machine no. 1420
Technical data:
Speeds 50-640 rpm
infinitely variable
2 gears
Rev counter
automatic electric magnetic feed 0,15--0,2--0,3--0,36
Work light
MK 4 recording
Pinol stroke 180mm
Emergency stop
Coolant pump
Throat 350mm
Izflgcp
table clamping surface 600x460mm
Height of the machine ca.2000mm
Weight 550kg more
5
repair required (used)
From an insolvency
Manufacturer Maxion
Bhztevdcxs
Model BS 25 ST
year of manufacture unknown
Machine No. 151922
Technical data:
Recording MK 3
Pinol stroke 120mm
Throat 260mm
Table clamping surface 270x400mm
Speed range 120-2160u/min
2 step motor
Quick release chuck up to 16mm
height of the machine 1800mm
Weight approx. 300kg
Condition: The infinitely variable speed adjustment is defective! more
5
Manufacturer Alzmetall
Model AB 35 S
Built xx
Mash.No.01792
Technical data:
Speeds 130-1490r/min
infinitely adjustable
2 geargears
Right-left running
Tachometer
automatic electr. magnetic feed 0.1--0.2--0.3
Working light
MK 4 Recording
Drilling chuck Röhm B16
Pinolstroke 150mm
Discharge 300mm
Table clamping area 500x370mm
Height of the machine approx.1900mm
Hvmuqkh
Weight 430kg more
6
Technical data:
- Drilling capacity in steel ST 60 35 mm
- Drilling spindle holder MK 4
- drill spindle stroke 150 mm
- 10 drilling spindle speeds 75 - 1450 rpm
- Right - left rotation
- 3 feeds 0.08 - 0.15 - 0.25 mm/rev
- Throat 350 mm
Hmo0yhj
- Table with 2 T-slots 400 x 450 mm
- max. distance table - drilling spindle 630 mm
- max. distance machined base plate - drilling spindle 1100 mm
- Height adjustable via gear rack with crank handle
- Coolant system
- Lighting
- Drive 400 V... more
6
1980
used
Column drilling machine ARBOGA type GM 3508
no. 194229 year of construction approx. 1980
drilling capacity 35 mm in steel
40 mm in cast iron
Spindle mount MK 4
Projection 300 mm
Pinol stroke 150 mm
Table size 500 x 400 mm
distance table - spindle nose min. 300 mm - max. 830 mm
Distance foot mounting surface - spindle nose 1230 mm
Spindle speed 60 - 1125 rpm 8 steps
Feed speed 0.10 - 0.40 mm/rev
Column diameter 150 mm
Motor power 2.2 and 2.5 kW pole-changing
Power supply 380 Volt, 50 Hz
Bil9o... more
1
1 used column drilling machine Imatec/Ibarmia
Type B 40
year 91
Technical data:
drilling capacity in steel 40mm
drilling capacity in cast iron 50mm
9 Speeds 61 - 1169 rpm
Spindle mount MK 4
spindle stroke 200mm
Overhang 385mm
Automatic feeds 0.1; 0.2; 0.3; 0.4 mm/rev
Column diameter 180mm
Weight 640kg
Biy97zlcdc
Technical data and dimensions: Errors excepted more
1
make Solid, type B350VS, table 400 x 500 mm, speed max. 1.200 rpm, feed - no. 53, item 44
Nz8ct
On behalf of the entitled persons we sell a column drilling machine from Solid,
The general terms and conditions of Lüders & Partner GmbH apply. more
1
drilling capacity steel ST 60 max 34 mm
Spindle mount MK 4
Projection 330 mm
Machine table w x d 742 x 460 mm
Machine dimensions:
740 x 1230 x 2300 mm,
Weight approx. 1000 kg
Special equipment:
motorized table adjustment up/down
Crobrnai
Tool Cooling
Connection cable CEE 16 A more
7
excellent (used)
Maximum drilling capacity: 40 mm
Recording: MK 4
Electromagnetic feed in 3 speeds stepless speed adjustment
Thread cutting device
Coolant pump speed display
Nkj2x
Aimer more
6
1978
used
Column drilling machine CORDIA type S-30
Masch. No. 625530 built in about 1978
Drilling capacity 30 mm
Spindle mount MT 3 - short sleeve
Bc9vc7pzkp
Throat depth 300 mm
Pinolhub 120 mm
Table size 500 x 450 mm
Column diameter 120 mm
Spindle speed 90-1450 RPM 9 levels
Motor power max. 2,2 kW
Power supply 380 v, 50 Hz
-Pole-reversible main engine with 3-speed
-3 reduction stages
-Table height adjustment via hand crank
-Clamping surface on the machine foot
Dimensions L x W x H 700 x 500 x 2100 mm
Wei... more
4
1 used pillar drilling machine
Fabr. Gillardon
Type GS 30 V
year 2016
Technical data
Continuous drilling capacity in E335 32 mm
Continuous drilling capacity in GG 20 40 mm
Weekread
Thread cutting (E335 / GG 20) M 27 / M 36
Feed rates approx. 0.1-0.16-0.25 mm/rev
Short spindle MK 3
Spindle stroke approx. 150 mm
RPMs:
approx. 65-1500min-¹
Engine n: 750/1500
Drive power approx. 1.1 / 1.8 kW more
5
new
Drilling capacity in steel 40 mm
Throat 300 mm
Delivery time prompt, subject to prior sale
drilling capacity: 40 mm
Thread cutting capacity: M-32
Recording: MK 4
Throat: 300 mm
Speeds: variable 80 - 1,170 rpm
Aut. feeds: 0.10 - 0.20 (2)
quill stroke: 190 mm
distance spindle-table: 150 - 950 mm
distance spindle-foot: 1.310 mm
Column diameter: 125 mm
table size: 400 x 420 mm
Engine: 1.3 / 2.4 kW
length: 655 mm
width: 440 mm
Bdslx2m9dh
height: 1.960 mm
Weight: 295 kg
ERLO (MADE IN SPAIN)For demandi... more
8
column drilling machine make WEBO type B 20
Make # 149/41
Technical data:
Dwwpcy
drilling capacity 20 mm
8 spindle speeds 125 - 1400 rpm.
Spindle mount MK 2
Projection 255 mm
spindle stroke 190 mm
Table size 450 x 360 mm
with 2 T-slots 14 mm
Drive power 1.3/ 1.1 kW
Dimensions 1000 x 600 x 1900 mm
Weight approx. 400 kg
with
- Foot switch
- Table height adjustable 400 mm
- head height adjustable approx. 250 mm
used, in good and functional condition more
6
Line drilling machine with 3 drilling heads consisting of:
Alzmetall AB 3 ESV
Year of manufacture 1975
Alzmetall AX 3 SV
Year of manufacture 1986
Solid TB 15 S
year of manufacture unknown
outer dimensions approx. 1800x1400mm
Weight approx. 1500kg
2 switch cabinets with 2 power connections available. the machine was built by the previous owner from several together
Etbv0uv
The offer is directed exclusively to tradesmen in the sense of §14 BGB
no sale to private! more
7
excellent (used)
Spindle retainer: MK 3
Drilling capacity 30 mm
Pohl-reversible motor with 3 speeds
3 reduction stages
Lighting
Blldzcpo more
6
1994
used
column drilling machine, flow drilling machine FLOTT type P 23 / 16 ST
Series. No: 40 161 111 Year of construction 1994
Continuous drilling capacity 18 mm in steel
Normal drilling capacity 23 mm in steel
Spindle adapter MK 2 - short sleeve
Projection 240 mm
Pinol stroke 100 mm
Table size 340 x 280 mm
column diameter 82 mm
spindle speed 850-4000 rpm infinitely variable
Engine power 0.75 kW
Mains connection 400 Volt, 50 Hz.
- Spindle speed infinitely variable via variator gearbox
- Digital drillin... more
5
drilling capacity: 32 mm
Tool holder: MK 3
Speed range, infinitely variable: 130 - 3500 rpm
spindle stroke: 160 mm
table size: 510 x 300 mm
Projection: 290 mm
Column diameter: 115 mm
Engine power: 1.5 / 1.9 kW
Connection: 380 V
Weight: 350 kg
Dimensions LxWxH, approx.: 970 x 650 x 1900 mm
Equipment:
- Machined base with T-slots
- Coolant foot with pump
- Emergency stop pushbutton
- Drill depth stop
- Speed indicator
- Albrecht drill chuck
Bitimlgflg
- Machine Light
- Foot switch (On/Off) more
1
new
Drilling capacity in steel 40 mmthroat 350 mmDelivery time approx. 6-8 weeks after placing the orderDrilling capacity in steel: 40 mmThread cutting capacity in steel: M32Reception: MK 4Hroat: 350 mmRpm: 45 - 2.200 rpm Feed rates: 0.10 - 0.18 - 0.24 mm/rev (3)Spindle stroke: 180 mm Column diameter: 150 mm Spacing spindle table: 95 - 865 mmTable: 480 x 480 mmMotor: 2.2 kWLength: 755 mmWidth: 480 mmHeight: 2.265 mmWeight: 432 kgERLO (MADE IN SPAIN)For production useHigh performance gearbox Drilling... more
7
Drilling capacity in steel ST 60 36 mm
- Drilling capacity in steel ST 60 40 mm
- Thread cutting device in steel ST 60 M 24
- Drilling spindle holder MK 4
- drill spindle stroke 160 mm
- Drilling depth fine adjustment with fixed stop
- Projection 330 mm
- Table with 2 T-slots 720 x 450 mm
- min. / max. distance table - drilling spindle 257 / 919 mm
- Stand width 290 mm
- Feed rates 0.1 - 0.2 - 0.3 - 0.36 mm/rev
- Drilling spindle speeds infinitely variable
- Stage 1 70 - 400 rpm
... more
4
Drilling capacity 50 mm
Thread cutting in St 60 M30
Table clamping surface 580x460 mm
quill stroke 200 mm
table travel - manual 530 mm
Column diameter 180 mm
Throat 360 mm
Spindle speed 50-2,200 rpm
Spindle mount MK 4
Feed rates 0.08-0.50 mm/rev
Biqqjbs9ts
Total power requirement 5 kW
Machine weight approx. 650 kg
Space requirement approx. 1150x680x2400 mm more
1996
excellent (used)
min. speed: 55 rpm
max. speed: 5000 rpm
Max. Feed: 2800mm/min
Tool holder: MK4
Pinole stroke: 180 mm
Thread capacity: M32
Maximum drill diameter (ST60): 32mm
Swe8xyhc
Coolant pump
New control including user manual
Drilling depth, speed and feed speed can be programmed via touch panel
Weight: approx. 830 kg more
6
1968
used
Column drilling machine blood HARDT type 4BA
Engine No. 9123 built circa 1968
Drilling power 40 mm
Spindle cone MK 4 - long sleeve
Throat depth 290 mm
Pinolhub 200 mm
Table size ø 500 mm
Column diameter 155 mm
Spindle speed 112-1120 RPM 6 levels
Bc9z0kfdkl
Feed rate 0.08 - 0.12 - 0.24 mm / U 3 levels
Motor output 1,5 kW
Power supply 380 v, 50 Hz
-6 speed 3 gears and two switchable during transmission levels =
-Clamping surface in the tool's base 400 x 400 mm
-Table height adjustment with hand cr... more
2
Make V Trade, type Economy ZY5050A, machine no. G105167, engine power 3 KW, max. drill Ø 50 mm, MK2 holder, coolant device - no. 304, item 61
On behalf of the entitled persons we sell a pillar drilling machine from V Trade.
The general terms and conditions of Lüders & Partner GmbH apply.
Biln8qes03 more
1
new
Drilling capacity in steel 40 mm
Throat 350 mm
Delivery time approx. 6-8 weeks from order placement
drilling capacity: 40/45 mm
MK: 4 MK
Projection: 350 mm
Speeds: 93 - 1,420 rpm (8)
Feed rates: 0.10 - 0.18 - 0.24 mm/min (3)
Engine: 1,5 kW
Weight: 435 kg
M9r8m9c
ERLO (MADE IN SPAIN)For production useHigh performance gear drilling machine 3 aut. feedsCoolant unit VDE- Electric Chuck protection left-right rotation Operating manual in GERMAN threading device € 610,-- more
5
For sale is a pillar drilling machine, type Gillardon GSB 40 V from Bauknecht.
Technical data:
Em2di9pdk
Continuous drilling capacity in E335 40 mm
Continuous drilling capacity in GG 20 50 mm
Drilling capacity 50 mm
Feed rates approx. 0.1-0.2-0.3-0.4 mm/rev
Short spindle MK 4
spindle stroke approx. 200 mm
Drive power approx. 1.6 / 2.9 kW
If you are interested, we look forward to hearing from you. more
7
- drilling capacity in steel max. 35mm
- Feed rate 0.1 / 0.2 / 0.3 mm/rev
- Speed 70 - 2600 rpm
- Tool holder MK 4
- Coolant system
- NOT - Off
Nz8ep
- Power 1.5 / 2.2 kW more
6
1993
excellent (used)
Spindle holder: MK 3
Max drilling capacity: 30 mm steel
Feed in 3 speeds
Bffpz3zaa8
Right and left
2 motor speeds
Stepless speed adjustment
Vice can be tilted to the right and left more
6
1998
used
Column drilling machine KNUTH type SSB 40
machine No. 115518 Year of construction 1998
Drilling capacity 40 mm
spindle holder MK 4 - short quill
Throat 350 mm
Pinol stroke 180 mm
Table size 470 x 470 mm
Column diameter 160 mm
spindle speed 50 - 1800 rpm infinitely variable
automatic feed 0,1 - 0,2 - 0,3 - 0,4mm/rev
Motor power 2 and 2.4 kW pole-changing
Mains connection 400 Volt, 50 Hz
- Alzmetall replica, structure very similar to the Alzmetall AB 4 SV
- Spindle speed via 2 gear steps, 2 engine... more
2
Huvema make, type HU-32PDM, year 1991, ser. no. 136842, table size approx. 700 x 200 mm, MK2 holder - no. 304, item 14
On behalf of the entitled persons we sell a column drilling and milling machine from Huvema.
The general terms and conditions of Lüders & Partner GmbH apply.
D9ixphtr0 more
5
new
Drilling capacity in steel 32 mm
Throat 250 mm
Delivery time prompt, subject to prior sale
drilling capacity: 32 mm
Thread cutting capacity: M-24
MK: 3
Projection: 250 mm
Speeds: 65 - 125 - 185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm
Aut. feeds: 0.10 - 0.20 - 0.30 (3)
quill stroke: 120 mm
Nirk9
distance spindle-column: 250 mm
distance spindle-table: 85 - 635 mm
distance spindle-foot: 1.170 mm
Column diameter: 100 mm
table size: 300 x 270 mm
foot size: 665 x 400 mm
Engine: 2.5 / 3.5 HP
length: 66... more
1
Standard equipment:
- Main switch lockable with motor protection switch
- Mushroom pushbutton (latching) for EMERGENCY STOP
- infinitely variable speed adjustment
- Digital speed indicator
- Feed overload protection
- Protection class IP 54
- Spindle protection with electrical fuse
- Lacquering: DD structure lacquer light grey RAL 7035, anthracite RAL 7016, black
- Machine oil Initial filling; containers supplied loose
Technical data:
drilling capacity steel St 60: 40 mm
Thread cutting
Steel St ... more
4
2002
good (used)
Drilling machine ZMM Metalik
Bixositino
Type: PK203
Y.O.M. 2002
Recording MK3.
Speeds 95 - 2000 rpm
Feed 4 steps.
Coolant device.
Power requirement 1,3 KW 400 Volt. more
excellent (used)
Drilling capacity in steel 35 mm
Tool holder MK 3
Right and left
Continuous speed adjustment with digital display
Automatic feed
Lighting
Us2yy28z more
6
1980
used
Column drilling machine WEBO type Gradua 50
Built in about 1980
Drilling capacity 50 mm
Spindle cone MK 5 - long sleeve
Throat depth 360 mm
Pinolhub 240 mm
Table size 560 x 560 mm
Column diameter 240 mm
Spindle speed 40-900 RPM 8 levels
Feed 0.12 - 0.19 - 0.26 - 0.4 - 0.5 - 0.76 1.10 - 1.70 mm / U 8 levels
Cf3pmpkq
Motor power 4 / 5,5 kW pole changing bar
Power supply 380 v, 50 Hz
-Spindle speed through the 2-speed motor and gear unit 4
-Motor speed level I and II for clockwise and counterclockw... more
5
Column drilling machine ALZMETALL
Mod: AX 3
year of construction: 1979
Cone holder - MK 3
Drilling capacity in steel - 25 mm
Motor power - 0,75 kW
5 x speeds adjustable via belts from 250 - 1600 rpm
Biud733g9u more
1
new
Drilling capacity in steel 30 mm
Throat depth 250 mm
Delivery time approx. 6-8 weeks of order placement
Drilling capacity: 30 mm
MK: 3
Throat depth: 250 mm
Speed: 45-3,100 rpm
Feeds: 0.10 – 0.20 mm / U (2)
Engine: 2 HP
Length: 400 mm
Width: 655 mm
Height: 2100 mm
Weight: 260 kg
ERLO (MADE IN SPAIN) for the ProduktionseinsatzHochleistungs gear drill 2 automatic feed coolant system left right rotation operating instructions in Deutsch(Symbolfoto)
M3ssuwy
Options:
Thread cutter
€ 400--
Digital di... more
2
column drilling machine make GILLARDON type GB 30 V
Fabr. # 0123588 Year of construction 1978
Technical data:
Drilling capacity in St 60 32 mm
Drilling capacity in GG 18 40 mm
Drilling capacity St 60 40 mm
Spindle holder MK 3
spindle stroke 175 mm
Throat 320 mm
Column diameter 130 mm
Spindle speeds infinitely variable 60 - 1600 rpm.
3 automatic feeds 0,1; 0,16; 0,25 mm/rev
Thread cutting capacity M 27 / M 36
Table size 450 x 355 mm
lateral clamping surface on the table 185 x 630 mm
Size of the b... more
6
Machine no. 121424
MK3
Drilling capacity 32 mm
Drill stroke 175 mm
Throat 320 mm
automatic feed
Thread Ø M24
rpm 60-1600
table 450 x 355 mm
2 kW
Bh2vz7drpi
Setting dimensions approx. L 900 x W 600 x H 1900 mm
Weight approx. 0.4 tons more
7
Gillardon: GB40VE, motor: 1.4-2.2 kw, 750-3000 rpm, 2 speed, infinitely variable speed control, oil bath gear, swivel
Working table, 3 adjustable feeds,Working table 570 x475 mm, right and left turning with hand and foot switch,MK4, thread-
cutting up to M36, lighting, supply drilling water.
Many accessories: machine vice, lathe chuck, tapping machine S.P.K.
Bhhw7g7v2p
Visits by appointment. more
6
1987
used
Column drilling machine ALZMETALL type from 60 S
Masch. No. 228 built in 1987
Drilling capacity in steel 65 mm
Drilling capacity in cast iron 75 mm
Spindle mount Mt 5 - short sleeve
Throat depth 400 mm
Pinolhub 240 mm
Table size 730 x 540 mm
Column diameter 260 mm
40-1200 RPM infinitely variable spindle speed
Motor power 5 and 7.5 kW pole-shift bar
Power supply 400 Volt, 50 Hz
-automatic feed in 5 levels of 0.1 0,14-0,2 0.28 0.4 mm / Rev
-Transmission level for high torque at low speeds
-Spindle... more
3
Drill sleeve holder: MK 3.
Drill sleeve stroke: approx. 150 mm.
Dwqdi3
Drill sleeve speed: 65 - 1750 rpm, infinitely variable.
Drill sleeve feed: 0.1 - 0.2 - 0.3 mm/rev.
Tapping device with changeover, right - left rotation.
Drilling table surface: 500 x 400 mm.
Drilling table height adjustable via hand crank.
Machine height: approx. 1900 mm, weight: approx. 500 kg.
The machine can be inspected and demonstrated under power by arrangement and is immediately available.
Please also note my further ... more
5
new
Drilling capacity in steel 32 mm
Throat 250 mm
Delivery time prompt, subject to prior sale
Bdslvfsmo8
drilling capacity: 32 mm
Thread cutting capacity: M-24
MK: 3
Projection: 250 mm
Speeds: 65 - 125 - 185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm
quill stroke: 120 mm
distance spindle-column: 250 mm
distance spindle-table: 85 - 635 mm
distance spindle-foot: 1.170 mm
Column diameter: 100 mm
table size: 300 x 270 mm
foot size: 600 x 380 mm
Engine: 2.5 / 3.5 HP
length: 600 mm
width: 640 mm
height: 2,0... more
1
column drilling machine make FLOTT type SB 16
Machine #251600229
Technical data:
drilling capacity 16 mm
Spindle holder MK 2
6 spindle speeds 430 - 4500 rpm.
spindle sleeve stroke 100 mm
Table size 340 x 280 mm
Projection 240 mm
Drive power 0,75 kW
Column diameter 82 mm
Dimensions approx. 400 x 700 x 1800 mm
Yshlwc
Weight approx. 130 kg
with
- Vise
- Emergency stop
- height-adjustable desk
- Drill Chuck
used, in good condition more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
New Machineseeker.com TV commercial with Michael van Gerwen
Machineseeker now also sponsering Greuther Fürth
Sell now on Machineseeker! Over 160,000 inquiries per month
Container Numbers Decline by 9 Percent Due to Corona – 15 Facts That Will Surprise You
