Used Metal Boxes for sale (44,090)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1, overall weight: 35 kg, maximum load weight: 400 kg, color: silver, We are selling used metal storage boxes. Actual photos are provided. Dimensions: 800x600x680 mm Djdpfxsvza N Nj Ak Aocp Weight: 35 kg Rails on the sides of the box. Current quantity available for sale: 250 units. EXW Nové Mesto nad Váhom / Slovakia.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1x steel container, steel box, crate, metal box with lid 32 units available Djdpfxszckfne Ak Ascp Dimensions: 120x100x77 cm With lid Hot-dip galvanized Completely closed and sealed bottom Very good condition, see pictures. Forklift available for loading. Pickup only by appointment in 75053 Gondelsheim. Shipping via freight forwarder is possible, please inquire with your postal code.

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Dedpfx Aoc Swhyek Aecp Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact!

Condition: new, Year of construction: 2025, Do you need an efficient and proven bending machine that you will use for years? Look what our satisfied customers write on the website! Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Dedpfxsh Atafs Ak Aocp Price: 1,900 euros Delivery date: every week Cash on delivery and bank transfer in advance Delivery costs PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Dcedpfxeh H Dk Ro Ak Ajp Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam. Dodpfx Ajc Swkhjk Ascp - Segments of an upper and lower clamping arm expand the application possibilities, - Blocking with the help of a pedal, the hands are free and you can freely position a sheet, - bending bench for universal use in repair and bodywork workshops, - compactly built, modernly shaped, - manual bench for standard tasks, - Segments of an upper span increase the flexibility, Technical specifications: - Max. Working width; 1250mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - Weight 255 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5400 euros Wheels inkl. We are looking forward to your contact!

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, Dcodpfx Akjcudl Ne Aop - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1250 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 265 kg

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: Dcsdpfoc I T Txox Ak Ajp - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: new, Year of construction: 2025, Bending machine with segments 1000/1.5mm This model SGR-1000mm is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability Technical specifications: - Max. Working width; 1000 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 235 kg - segmentback width 30,40,50,60,70 and 100 mm - casters (moved) inkl. Dodscxviaepfx Ak Ascp Price excl. shipping We provide invoices with 0% of tax

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Dsdpfx Aoqxandjk Ajcp Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz Dcjdpefnabyofx Ak Ajp - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,300 kg, total length: 2,880 mm, total width: 1,020 mm, total height: 1,450 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, NEW MTP W2.5×2540 SEGMENT FOLDING MACHINE – 2540 × 2.5 mm The MTP W2.5×2540 manual segment folding machine (box and pan folder) is designed for precise bending of sheet metal up to 2.5 mm thick and 2540 mm wide. The segmented upper beam lets you form boxes, trays, profiles, flashings and other complex shapes with closed sides. The rigid steel construction ensures accurate, repeatable bends – ideal for roofing, ventilation, HVAC, signage and general sheet-metal workshops. TECHNICAL DATA • Working width: 2540 mm • Max. sheet thickness: 2.5 mm (mild steel) • Max. bending angle: 135° • Dimensions (L × W × H): 2880 × 1020 × 1450 mm • Weight: 1300 kg ADVANTAGES Dodpfsytparjx Ak Aecp • Segmented upper beam for boxes and closed profiles • Heavy, rigid welded steel frame • Simple manual operation – no power supply required • Accurate and repeatable bending results WARRANTY & DELIVERY • 12 months warranty on parts • Price: EUR 5,162 net (excl. VAT), EXW Sokołów Podlaski We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Height: 45cm Price: 2,950 euros Djdpocgmf Rjfx Ak Ascp Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Year of construction: 1970, condition: ready for operation (used), A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible. Dcjdpfsy I Adnex Ak Aop

Condition: new, functionality: fully functional, Year of construction: 2026, bending angle (max.): 135 °, overall weight: 165 kg, total length: 1,500 mm, total width: 350 mm, total height: 530 mm, warranty duration: 12 months, Equipment: documentation/manual, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Djdsytfabjpfx Ak Aocp Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Dsdeyuyz Njpfx Ak Aocp Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. Dcodpfozdf Tpjx Ak Ajp TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: MTP-FR400G-2026-001, workpiece weight (max.): 600 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, total height: 2,080 mm, total length: 1,950 mm, total width: 1,600 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 300 mm, type of input current: three-phase, table width: 520 mm, overall weight: 2,600 kg, table length: 720 mm, warranty duration: 12 months, table load: 600 kg, input voltage: 380 V, input frequency: 50 Hz, CNC WIRE EDM MTP FR-400G – WORKTABLE TRAVEL 400 × 500 mm – BRAND NEW, DELIVERY IN 2 MONTHS Brand-new precision CNC medium-speed wire EDM machine with Panasonic AC servo drives, 300 mm maximum cutting thickness and ±0.003 mm machining accuracy. Rigid low-bed cast-iron base with C-type frame, constant-tension wire system and a modern industrial-PC control with 15" monitor – suitable for tool and die shops, mould makers and precision parts manufacturers. Key features • Worktable travel X/Y 400 × 500 mm, worktable 520 × 720 mm, load up to 600 kg • Maximum cutting thickness 300 mm, taper cutting ±6° / 80 mm (U/V travel ±25 mm) • Machining accuracy ±0.003 mm, best surface roughness Ra ≤ 0.6 µm • Panasonic 750 W AC servo motors on X and Y axes, no-backlash drive • C3 precision ball screws and P2 linear guideways (THK / HIWIN / Yintai) • Constant-tension wire transport system, wire drum with frequency-controlled speed • Rigid low-bed cast-iron base with C-type frame, resin-sand castings • Industrial PC control, 15" industrial LCD monitor, G-code and macro support, AutoCAD import, expert system for multi-cut programs • Automatic wire positioning: edge, hole centre, outer centre, corner, three-point circle • Power-off recovery, 100 coordinate systems, 1000 parameter sets, 2D/3D graphic display and simulation Technical data Worktable travel X / Y: 400 × 500 mm Worktable size: 520 × 720 mm Maximum workpiece load: 600 kg Maximum cutting thickness: 300 mm Cutting taper: ±6° / 80 mm Djde Ahprcspfx Ak Ascp Taper (U, V) travel: ±25 mm Maximum cutting speed: ≥ 240 mm²/min Machining accuracy: ±0.003 mm Best surface roughness: Ra ≤ 0.6 µm X/Y positioning accuracy: 0.007 mm; repeat accuracy: 0.003 mm Minimum feed increment: 0.001 mm Electrode wire diameter: 0.08 – 0.25 mm Pulse width: 1 – 256 µs (stepless); pulse interval 1:2 – 1:9 Power supply: 380 V ±10 %, 50 Hz, 3 phases Power consumption: ≤ 2.5 kVA Display: 15" industrial LCD monitor Dimensions and weight Main machine body (L × W × H): 1950 × 1600 × 2080 mm Control cabinet (L × W × H): 950 × 800 × 1930 mm Water tank (L × W × H): 1100 × 650 × 1030 mm Weight of machine: 2300 kg Weight of electrical control cabinet: 300 kg Total weight (machine + cabinet): 2600 kg Standard equipment • Electrical control cabinet with industrial PC and 15" monitor • Water tank (dielectric / working fluid tank) • Mobile double-plate worktable support fixture • Operating manual and CE documentation Condition and availability Brand new machine, made to order. Waiting time for the machine is approx. 2 months in total, including delivery. Serial number: MTP-FR400G-2026-001. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: good (used), Technical data for pallet rack beam: Racking system: Metall Sistem Type: Unipal Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contacts in our company: Mr. Andre Evering Dcodpfx Ajxb Tp Esk Aep Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: good (used), mileage: 150,244 km, power: 105 kW (142.76 HP), first registration: 06/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,220 mm, total height: 3,120 mm, loading space length: 4,330 mm, loading space width: 2,120 mm, loading space height: 2,100 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, tail-lift, traction control, = Additional Options and Accessories = - Halogen lamp Dcjdpj Ah D I Isfx Ak Asp - None - Tail lift - Manual - Radio/cassette - Rear view camera - Fabric = Notes = Configuration: 4x2, Tare weight: 2715 kg, Gross vehicle weight: 3500 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Radio/cassette, Carplay, Color: Anthracite, Metallic, Rear view camera, Lighting type: Halogen lamp, Climate control, Bluetooth, Engine power: 105 kW (141 hp), Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side wall paneling, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Seats: 3, Seat arrangement: 1+2, Seat covering: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 215x160, Battery for ramp, Box van with tail lift, side door, staggered paneling, Euro 6, 143 hp, Spare wheel, Spare wheel tread: 7%, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 6 mm Axle 2: Tire tread left: 2 mm; Tire tread right: 2 mm Weights Tare weight: 2,715 kg Payload: 785 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 750 kg Loading platform height: 90 cm Maintenance APK (Technical Inspection): valid until 04/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: €415 per month (delivery van, 72 months); Please inquire for more information and terms.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Dedpfx Ajzza Egok Ascp Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Year of construction: 2007, functionality: fully functional, We offer a Magnetix metal magnet. Type: SWP80 Working width: 800 mm Year of manufacture: 2007 Dedpfjt Uyvrjx Ak Aocp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. Dodpfxjyv Ewmo Ak Ascp A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 274 mm, spindle bore: 82 mm, turning diameter: 460 mm, turning length: 1,500 mm, total length: 2,720 mm, total width: 1,040 mm, total height: 1,340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 2,080 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1500 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 82 mm spindle bore, 5.5 kW main motor and 1500 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Key features • Turning length 1500 mm, spindle bore 82 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Swing over bed: 460 mm Swing over cross slide: 274 mm Swing in gap: 690 mm Maximum turning length: 1500 mm Bed width: 300 mm Spindle nose: D8 Spindle bore: 82 mm Spindle taper: Ø90 (1:20) Spindle speed: 25 – 2000 rpm, 12 speeds Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 120 mm Dcode Af Uncjpfx Ak Aop Tailstock taper: MT4 Top slide travel: 120 mm Cross slide travel: 290 mm Main motor power: 5.5 kW Coolant pump power: 0.09 kW Dimensions (L × W × H): 2720 × 1040 × 1340 mm Weight: 2080 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer Dcsdpfxerx Rxpe Ak Aop - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table