Used Fasti for sale (92)

Condition: ready for operation (used), De plaatdikte is afhankelijk van het profiel. Bljdpfsygyvwsx Afpsc dop: 0,5 1,5 mm 7 stations vermogen: 2,4 kW gewicht: 430 kg

Condition: used, functionality: fully functional, Year of construction: 1975, Mechanical Swing Bending Machine Make: FASTI Model: 208 2040x3mm Year: 1975 Technical Data Manufacturer: Fasti Model: 208-20-3 Year of Manufacture: 1975 Working length: 2040 mm Sheet thickness: 3 mm Upper beam stroke: 200 mm Stroke speed: approx. 7 mm/s Dimensions: Weight: Bljdpfx Afjx An Tuopsc Equipment • Swiveling upper beam • Motorized upper beam • Maximum upper beam opening: 200 mm • Lower beam adjustable beneath pivot point, 100 mm • Bending beam adjustable beneath pivot point, 100 mm • Bending beam swivels up to 180° • Backgauge adjustable from 0 to 600 mm • Various bending rails as shown in photo All information provided without guarantee. A powered demonstration is available at any time in our exhibition hall.

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 5 mm steel Blsdpfeyglvvex Afpoc Upper beam stroke: 350 mm Manual and automatic mode possible Motors adjustable rear stop with spring fingers and digital display Central lubrication Segmented upper and lower gate rack for 2050 mm 5600 kg

Condition: good (used), Year of construction: 1982, Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Bjdpfx Ajk Iymxsfpolc Machine in Good Condition Undercurrent Demonstratable .

Condition: good (used), motorized limit stop behind foot switch Blodpshtq N Nefx Afpjc Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2018, sheet width 1040 mm plate thickness 3.00 mm ST diameter of upper rolls 100 mm side roll diameter 100 mm diameter of lower rolls 100 mm speed 6.0 m/min semi-automatic operated FM 2.1R voltage 400 V total power requirement 2.2 kW weight of the machine ca. 740 kg range L-W-H 2250 x 825 x 1910 mm Very well-kept condition (almost as good as new)! current new price including accessories ~ 28.000 Euro special price on request Start and finish rounding is very easy with this machine thanks to the special concept, the extensive accessories and the robust construction. Machine for for one-off production and series production = extremely universal and economical. Equipment: - Robust electro-mechanical three-roll round bending machine - Driven by spur gear brake motor Primary reduction gear - Top roller Side roller electrically driven - Asymmetrical roll arrangement - Manual bottom roll adjustment * with analog position indicator - FASTI control unit "FM 2.1R" * Setting max./min. max./min. travel value side roller - Swing-out top roller, with hinged bearing - Conical bending device Blodpfx Afox U Emfspoc - 1x freely movable double foot switch * Right / left rotation of the rollers - Electrical safety device (cable) - original operating instructions

Condition: excellent (used), Year of construction: 2018, plate thickness 2.0 mm throat max. 400 mm Roller center distance min/max 100/120 mm piston stroke max. 20.0 mm turning speeds 3.0 - 15.0 U/min voltage 400 V total power requirement 2.95 kW weight of the machine ca. 385 kg range L-W-H 1200 x 800 x 1200 mm very good condition (almost like new) !!! Equipment: - heavy / robust electro-motorized beading machine - electro-motor drive - infinitely variable speed adjustment - internal gear brake motor - electro-hydraulic infeed of the top roller - 1x adjustable stop plate - 1x freely movable double foot switch - 2x set of beading/conveyor rollers Bedpsx U El Uefx Afpslc - original operating instructions

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 Bljdpoygv S Ujfx Afpec A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: used, Year of construction: 1970, plate thickness max. 1,5 mm sheet width max. 1.020 mm Year ca. 1970 manual ja ja ja +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Blodpfox U Daksx Afpec +++++

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) Bodpfehmmfkox Afpolc - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Year of construction: 1997, condition: ready for operation (used), This SCHRODER-FASTI FASTI 509-40-6 was manufactured in 1997. A Hydraulic shearing machine capable of handling aluminum up to 8mm, steel up to 6mm, and stainless steel up to 3mm. Minimum stop dimension is 15mm. A solid choice for shaping various metals, the SCHRODER-FASTI FASTI 509-40-6 machine we have for sale. Contact us for further details. Additional equipment • Front-operated motorised fence • Right-angled side stop 90° with tilt stop • 2 drop cam stops in T-slot guide • Table extensions with T-slots • Operating tool Machine Benefits Technical Machine Benefits • Minimum stop dimension: 15 mm • Construction: all-steel welded construction • Cutting technology: / double-edged, multi-part blades with 87° wedge angle / stepless cutting length adjustment / cutting gap adjustment (can be read to 1/100 mm using a dial gauge) / cutting line display with silhouette • Drive: hydraulic with oil filling • Control system: o electric control in accordance with din en 60204-1 / operating modes: single stroke, continuous stroke, partial stroke, jogging Bedpfx Afsx U T Haepjlc • Projection on the side stand: 50 mm • Dimensions (approx. ) for 509-40-6: a (total length): 4540 mm /b (table width): 1885 mm /c (table depth): 1645 mm/ d (cutting length): 4300 mm/ h (height of work surface): 2329 mm /k (total machine height): 1430 mm • Side stand projection: 50 mm (standard) • Foundation fastening: composite anchor hva m16x125 with mortar cartridges (drill Ø 18 mm) / concrete strength class min. B25 required. • Cutting performance: shear angle: large angle = lower resistance, higher performance. / small angle = higher resistance, lower power // max. Sheet thickness: o dependent on material strength (see diagram in document). O recommended strip width: 12-15 × sheet thickness for low-torsion cuts Extra Information Machine still under power

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg Equipment: · Manual back gauge · Cutting gap adjustment · Cutting angle adjustment · Cutting line illumination Blodpfxstvfzco Afpsc

Condition: good (used), Round bending machine with hand crank operation, max. working width 2 m, old, stable and heavy cast iron machine. Bljdpfx Asyf Uahsfpjc

Condition: used, Year of construction: 1985, sheet width 2500 mm plate thickness 6 mm rear stop 750 mm down holder 16 Stk total power requirement 12 kW weight 5400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Equipment: Bledpjt Sykqjfx Afpoc - Electric backgauge 750 mm - Pneumatic sheet metal holders - 2x side stops - 3x front support arms - Ball rollers in the front support table - Rear sheet metal chute - Foot switch

Condition: used, Year of construction: 1985, sheet width 2550 mm plate thickness 4 mm rear stop 1000 mm cutting angle 1,5 ° Bodpfx Afjv Uq Snepolc down holder 14 Stk total power requirement 6,5 kW weight 3400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Features: - Electric rear stop 1000 mm - Electric cutting angle adjustment - 1x side stop 1250 mm - 3x front support arms - Front finger guard - Foot switch

Condition: good (used), electric clutch, electromagnetic clutch for guillotine shear, sheet metal shear, sheet metal guillotine shear, crank guillotine shear, eccentric press -for: Crank-operated guillotine shears -Equipment: Coupling, transformer, control unit -Manufacturer: LABOD electronic Bedpfx Afob A I Uiepjlc -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Condition: good (used), Three-roller round bending machine, three-roller sheet metal bending machine, bending machine, sheet metal rolling machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine, motorized round bending machine -Roll bending machine: hand-operated 3-roll roll bending machine -Max. sheet width: 1270 mm -Max. sheet thickness: 2.5 mm Bsdowcrk Hepfx Afpjlc -Roller diameter: 90 mm -Dimensions: 1960/610/H1050 mm -Weight: 524 kg

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Bodsxaa I Sepfx Afpslc Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW Bedpfx Afsxabd Uopjlc weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions Bjdpjxabvqjfx Afpelc * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm Blodpsxabk Isfx Afpec From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - Bsdjxrgv Tspfx Afpelc ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: used, functionality: fully functional, Year of construction: 1981, machine/vehicle number: 3584, FASTI guillotine shear Type: TCHE 25/6 Sheet width: 2500 mm Sheet thickness: 6 mm Back gauge: 750 mm Hold-downs: 16 units Total required power: 12 kW Bljdjyarwyjpfx Afpoc 3x front support arms Foot pedal Dimensions: approx. 3000 x 1500 x 2000 mm Weight: 5400 kg Serial no: 3584

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Mechanical upper jaw adjustment Bjdpfx Aevmz Drefpjlc Polished bending rail Weight: approx. 1800 kg Very good condition

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Bsdpfx Afjvmz Nbepjlc Weight: approx. 6500 kg