Used Fasti 527-10-4 for sale (93)

Condition: used, Year of construction: 2004, Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Fpodpfx Ahjryan Ej Uop Manual backgauge up to 550 mm Side stop and table extensions The rear area is protected by a protective fence with light barriers knife sharpened Operating instructions available Weight: 1600kg

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms Fpedpfoxrgv Tox Ah Uop - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: used, functionality: fully functional, Year of construction: 1985, working width: 1,050 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,300 kg, Capacity: 1050 x 4 mm. Backgauge: Motorized. 1000 mm. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 7,5 kW. Year: 1985 Country of origin: Denmark/Germany. Size (L x W x H): 1550 x 3050 x 1750 mm. Weight: 2300 kg. Fedexr U Siopfx Ah Ujpp With squaring arm and 2 support arms. Very good condition. All our machines are tested and serviced before delivery.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 8618030, Offer 25182 Technical Data: Fpjdpfxewq It Ts Ah Ujp - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm - Rear roller and bottom roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right + left: 6 m/min - Drive: 380 V / 6.2 kW - Space requirement approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - With: - asymmetrical roller arrangement - crown-turned naturally hardened rollers - manual adjustment of rear rollers - pre-bending - pivotable top roller - electric foot switch for right and left rotation

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Fodjw Ulk Nepfx Ah Uopp

Condition: used, Year of construction: 1985, sheet width 2550 mm plate thickness 4 mm rear stop 1000 mm cutting angle 1,5 ° down holder 14 Stk total power requirement 6,5 kW weight 3400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Features: - Electric rear stop 1000 mm - Electric cutting angle adjustment Fedpfx Ahev Uq Sne Ujpp - 1x side stop 1250 mm - 3x front support arms - Front finger guard - Foot switch

Condition: used, functionality: fully functional, Year of construction: 1992, controller manufacturer: Nuova, controller model: PRG 911., working width: 2,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, overall weight: 3,100 kg, Capacity: 2000 x 4 mm. Backgauge: Motorized, Nuova PRG 911. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1992 Country of origin: Germany. Size (L x W x H): 2750 x 3800 x 1700 mm. Fedpfx Ahoxpf Rde Ujpp Weight: 3100 kg. With sheet support, sheet conveyor, squaring arm, 2 support arms and extra blades. All our machines are tested and serviced before delivery.

Condition: used, Hydraulic guillotine shears FASTI Type 509 - 25/4 Machine no. No. 5418 Year of construction 1991 Fjdpfx Ahst Apumo Uepp Cutting length 2535 mm Cutting thickness 4 mm Backgauge 5-1000 mm (controlled) Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 7.5 kW Mains connection 400 Volt, 50 Hz - Back gauge with positioning control ELGO ELECTRIC type 85 - Sheet holding device under the back gauge - Manual cutting gap adjustment with dial gauge display right and left - stepless cutting length adjustment - Hydraulic cutting angle adjustment via hand pump - front angle stop left 1300 mm - 14 sheet hold-down devices - electric foot switch - very solid and torsion-resistant welded construction - 1 set of original FASTI replacement blades (4 pieces, presumably new and unused) space requirement L x W x H 3100 x 2350 x 1700 mm weight 3500 kg good condition

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW Fpjdpfxohhc Ixs Ah Uop - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: used, Year of construction: 1969, Fasti guillotine shears type 506/10/2.5 Fedpfxsrhk T Nj Ah Ujpp

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU Fpjdpfoxabvqjx Ah Uop number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition (!!) Equipment: - robust electro-hydraulic "swing cut" guillotine shears - electro-motorized rear stop - electric cutting length limiter - electro-motorized cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable, front support arms - 1x freely movable foot switch - front finger guard - EMERGENCY STOP button at the front - operating instructions * Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

Condition: used, functionality: fully functional, Year of construction: 1989, working width: 1,250 mm, sheet thickness steel (max.): 4 mm, overall weight: 2,600 kg, Capacity: 1250 x 4 mm. Backgauge: Manual, 500 mm. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 7,5 kW. Fpjdpfx Aoxpf Hreh Usp Year: 1989 Country of origin: Denmark. Size (L x W x H): 1850 x 1600 x 1800 mm. Weight: 2600 kg. Special machine for thin plates. With new 500 mm. manual back gauge, pneumatic plate holddowns, plate seperator, adjustment of pressure on hold downs and 2 movable support arms with rulers and flipstops. All our machines are tested and serviced before delivery.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: Fpedpfet Ucgajx Ah Uop - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 Fpsdpfxjxabd Ue Ah Uep total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment Fpjdpfexaa I Sex Ah Ujp - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper beam adjustment via foot switch Fsdpfsf Nwmzsx Ah Ujpp

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz Fodpfx Aju Rimmsh Uopp - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: excellent (used), Fasti hand guillotine shears type 505 - 10 - 2 1060 x 2.0 mm Fodpfxowgylaj Ah Uspp

Condition: ready for operation (used), Fasti Beading Machine Size 4 150 x 4mm Output Max. Throat 500mm Hydraulic adjustment of the top roller via foot switch Right/left rotation Continuous speed adjustment via handwheel 60mm Mount Fjdpev Tqy Njfx Ah Ujpp Weight approx. 1500kg with accessories Year of manufacture 1963 Space requirement approx. 1000x1000x1750mm

Condition: used, Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Fpodew Hygdopfx Ah Uop Pneumatic sheet metal holding Side stops and table extensions cutting length limitation Cutting edge lighting Weight approx. 7500 kg

Condition: used, Max. bending length: 1020 mm Fodpfx Aowlp Tqsh Ujpp Max. sheet thickness: 2 mm steel Weight: about 500 kg

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 4 mm steel Controlled back stop up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Fpedpowfqrzsfx Ah Ujp knife sharpened Weight approx. 3000 kg

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. disc diameter: 1000 mm Fpsdpfx Ahswb Efze Uep Motorized drive via foot switch

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled back stop up to 1,000 mm Side stop and table extensions Fpodpfx Ahef Nwvfo Usp Cutting length limitation Cutting edge lighting Protective fence, rollable with safety switches Weight: approx. 8500 kg

Condition: used, Max. bending length: 1020 mm Fedpfx Ahjq T Ud Se Uepp Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be preselected via scale Manual and automatic bending mode possible Weight: approx. 650 kg