Used Fasti 507-20-3 for sale (88)

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request Lasdpfx Asz H Ah Sekqeh terms of payment: 100% prior to delivery

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 3 Year of manufacture: 1989 Technical data Laodpfx Aez Hayxjkqeh Manufacturer: Fasti Type: 212-20-3 Year of manufacture: 1989 Working length: 2040 mm Sheet metal thickness: 3 mm Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Controlled rear stop 1000 mm with ball rollers, extendable to 1500 mm - Siemens S7 control system for bending angle + rear stop - Manual adjustment of bending dies - Bending rail 12 mm - Support rail, height 130 mm, length 1,600 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2004, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ledoz Iuapepfx Akqeah

Condition: used, Max. cutting length: 2040 mm Ljdpfx Aeukhnnokqjah Max. sheet thickness: 2 mm steel Manual rear stop up to 500 mm Side stops and table extensions knife sharpened 1900 kg

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 3240 mm Bending capacity, steel: 4.0 mm Bending capacity, stainless steel: 3.0 mm Bending capacity, aluminum: 8.0 mm Control system: DELEM DA65 graphic 2D CNC-controlled: angle, bending radius, and back gauge Bending angle setting: 0 – 150° Upper beam opening: 500 mm Ledpfxoz I Ekxo Akqsah Back gauge travel up to 1100 mm, with table extension up to 3000 mm Motor power: 7 kW Dimensions (length x width x height): approx. 5300 x 2350 x 2200 mm Weight: approx. 7.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lodoxz Emvspfx Akqeah Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

Condition: used, Year of construction: 2008, overall weight: 190 kg, hopper volume: 7 l, terms of delivery: FCA Pegnitz Ledpfoz N Igmsx Akqsah delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Ledoum Ttzepfx Akqsah Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Lodpezi S U Aefx Akqjah

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Laedpfoyhqhtsx Akqoh Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Laodpfx Aksyyl Nkeqjh Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg Lajdpoyyl Nqefx Akqjh

Condition: used, machine/vehicle number: 76271002, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Laodpfe Aa A Dyox Akqoh Sheet width: 2,040 mm Sheet thickness: 1.2 mm Performance data Total power requirement: 2.5 kW Machine weight: approx. 2.0 t Dimensions Space required: approx. 3.0 × 1.6 × 1.7 m EQUIPMENT No information available regarding accessories.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. Ljdpoz Aqx Tefx Akqeah A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left Ljdszl A Raepfx Akqoah - Sliding carriage

Condition: good (used), functionality: fully functional, Size: 25 / 3.25 Cutting length: 2540 mm Sheet thickness at 400 N/mm²: 3.25 mm Cutting angle, approx.: 1.3° Strokes per minute: 50 H/min Laodpfx Akoz Iznmoqjh Drive power: 7.5 kW

Condition: used, Year of construction: 1961, sheet width 1020 mm Lasdpfxezfax Is Akqjh plate thickness 2 mm

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Laodpfx Aszb Emdokqjh Errors and omissions excepted.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Lajdjz Ah Apjpfx Akqoh Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: used, Year of construction: 1985, Max. bend length: 1020 mm Max. Sheet thickness: 2 mm steel Good condition Lajdpfx Akjzvw S Tsqoh Weight: 400 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2528006, Sheet metal shear, 2 m, the blade is new, and maintenance has been performed by Fasti’s service department, including the replacement of the conveyor belts. The Fasti-Matik FM 5.1 S is a modern program control for hydraulic sheet metal shears. · Simple program creation · Clear presentation of the programs · User-friendly program management · 4 controllable axes: · 1 x upper blade · 1 x motor stop · 1 x shear angle · 1 x cutting gap Lasdpfxez R Dgxs Akqeh · 4 additional function connections (R1 to R4) · Data input via LCD touch screen · Basic data consisting of information for: · Material strength [N/mm²] · Sheet thickness [mm / Inch*] · Number of program cycles · Program set consisting of information for: · Number of cuts · Dimension of the motor stop * [mm / Inch*] · Cutting length [mm / Inch*] · Shear angle [°] · Cutting gap [mm / Inch*] · Auxiliary function "reverse stop" [yes / no] · Auxiliary function "with sheet holding" [yes / no] · Auxiliary function "open clamp at TDC" [yes / no] Features Protection class IP 65 · 11.3“ color LCD touch screen display · Non-volatile memory for machine parameters · Material memory for 20 workpiece materials · Non-volatile memory for 15 programs, each with 20 steps · Max. 99 cycles per cutting sequence · Operating modes: Step Manual Automatic · Information aids: Actual value display, error display · Error detection and display of the error in plain text.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg Lodjzgu Tiopfx Akqjah

Condition: used, Year of construction: 1994, Max. Cutting length: 3040 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Hydraulic shear angle adjustment cutting length limitation Ledpfx Aez Et Slskqoah Cutting edge lighting knife sharpened Weight approx. 6500 kg

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Any warranty is excluded. Laodpfx Aezibtnskqsh We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Manual backgauge with spring fingers Lodpfxex Ebt Te Akqeah 4000 kg