Used Sheet Metal Folder for sale (36,801)

Condition: used, functionality: fully functional, Year of construction: 2013, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 20 mm, back gauge: 1,000 mm, input current: 60 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, We are offering this used Schechtl MBM 310/ECT pivoting bending machine, manufactured in 2013. Year of manufacture: 2013 Model: MBM 310/ECT Serial number: MA6239 Capacity: 1.00 mm Three-phase frequency: 50 Hz Bjdpfezrabiox Aknjwu Machine rated current: 60 A Wiring diagram number: 300.000 Order number: 20.013 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Capacity: 3mm steel, aluminum, etc., and more. Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Other equipment and tools for sheet metal processing are available. Bodjz Ad Rvopfx Aknewu

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Bwodpoz Hu Evsfx Aknsu Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 5,500.00 (plus VAT) ex-works.

Condition: good (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 8142, control type: manual, Equipment: emergency stop, foot remote control, Thalmann Pico 150 / 6.2 The Thalmann Pico 150-6.2 is a hydraulic long bending machine (swing bending machine) manufactured by the Swiss company Thalmann. The model designation directly reflects the key specifications: a maximum sheet metal thickness of 1.50 mm for steel and a working length of 6.2 meters. Technical data at a glance: • Working length: 6,200 mm • Maximum sheet metal thickness (steel, 400 N/mm²): 1.50 mm • Maximum sheet metal thickness (aluminum, 250 N/mm²): 2.00 mm • Insertion depth / overhang: 1,000 mm • Maximum bending angle: 145 degrees • Equipment: with electric hydraulic roller shear (motor shear) • Total weight: approx. 2,800 kg • Power requirement: 3 kW The machine is in good condition. Available immediately. Inspection possible by appointment. Bodpfx Aoz Hiw Toknowu Price includes dismantling and loading onto a truck.

Condition: used, functionality: fully functional, Year of construction: 1981, Motorized Swivel Bending Machine Manufacturer: KRAMER, Type: AMaut III 3000 x 2 mm Completely overhauled in 1981 Bjdpfxjz Eg Aqj Aknewu Technical Data Manufacturer: KRAMER Type: AMaut III 3000 Year of Manufacture: Completely overhauled in 1981 Usable Length: 3000 mm Sheet Thickness: 2 mm Stroke: Dimensions: approx. L x W x H 4.2 x 0.90 x 1.5 m Equipment • Bending angle adjustment via potentiometer! • Manually adjustable crowning • Documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Bwsdpfx Aoz Ah Apjkneu Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Bsdpfxoygv S Ue Aknewu Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Swivel Bending Machine Bwodjz Hayxjpfx Aknou Manufacturer: FASTI, Type: 212 – 20 – 3 Year of manufacture: 1989 Technical data Manufacturer: Fasti Type: 212-20-3 Year of manufacture: 1989 Working length: 2040 mm Sheet metal thickness: 3 mm Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Controlled rear stop 1000 mm with ball rollers, extendable to 1500 mm - Siemens S7 control system for bending angle + rear stop - Manual adjustment of bending dies - Bending rail 12 mm - Support rail, height 130 mm, length 1,600 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), AK 200: The machine is equipped with: ✅ a foot pedal ✅ a shear bar Bjdjz Dumhjpfx Aknswu ✅ a 10mm clamping bar ✅ Performance: 1mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 750kg HS 200 The machine is equipped with: ✅ a back gauge ✅ extendable sheet metal support ✅ Performance: 1.25mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 650kg Condition: • good technical condition • good optical condition

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Bodpozzff Sjfx Aknjwu Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: excellent (used), You are bidding on: a branded machine - folding press, from a very reputable and well-known manufacturer - Schröder Machine features: Folding press Schröder AKV Rail bends cleanly – test possible Angle display Bending length just over 2m Sheet thickness: 2 mm (steel sheet); for aluminum, zinc, etc., up to approx. 3 mm Standard rail – optionally also available with segmented rail (see picture)! Optional back gauge Matching guillotine shear available, e.g., Schröder 2m/3mm (see last picture), or Schechtl HT, Ras, etc. Current new price is approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauge – everything related to sheet metal and steel processing, including folding presses, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (beading tools, roll formers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions. You will receive an invoice according to § 25a UStG. Free loading is possible – weight approx. 1550 kg. Viewing and testing are possible and encouraged by telephone appointment. Bwjdjy Hbv Tepfx Aknju Payment in cash upon collection. Benefit from our experience and expertise; we will be happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: Folding Press Schröder AKV 260401

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Any warranty is excluded. Bsdjzibtnspfx Aknewu We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. New list price 2024 – see pictures (now more expensive again) €18,490 net, excluding the radius beam. Features of the device: Press brake Schechtl HA Beam bends cleanly – testing possible Degree indicator Bending length slightly over 2m Sheet metal thickness 2 mm steel – sheet – aluminum, zinc, etc., up to approx. 3 mm Beam radius for aluminum, zinc is installed – a sharp beam is also included (see picture)! Optional: depth stop Sheet metal shear HT 200 or sheet metal shear Schröder electric 2m - 2.5mm would be optional. Important! Optionally, you can find and purchase many machines and machine accessories, such as various beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, backstop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. Bwodjzgt Nvjpfx Aknsu You will receive an invoice in accordance with §25 a UStG – the value-added tax is included in the invoice amount. Subject to differential taxation. Free loading is possible – weight approx. 1450 kg. Inspection and testing are possible and welcome after a telephone appointment has been arranged. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Article number: Press brake HA 200

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine Bwodozmy Eqepfx Aknou If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Schröder Powerbend Universal Swivel Bending Machine 2000 x 4 mm Bwedpfxszlx Izo Akneu Manufacturer: Schröder Group Type: Powerbend Universal 2000 x 4 mm Year of manufacture: 2019 Condition: used, like new Further information available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,000 h, Equipment: CE marking, documentation/manual, RAS Multibend Center 79.26–2 Maximum board length: 2560 mm Maximum board width: 1500 mm Maximum bending height (four-sided): 203 mm Up and down bending Tool changer Board feeder for robot loading KUKA loading robot KR 150-2K Various tools for sheet metal thickness 1-2.5 mm Only approximately 7,000 operating hours! Absolutely like new condition, evident, among other things, in the hardly worn original tools. Inspection while the machine is powered on is possible. Price is ex works; the buyer is responsible for dismantling. Bsdpoz Ig Tujfx Aknswu

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2-meter swivel bending machine from Schroder Type: MAKV Bjdpfx Aezgtmzjknowu Capacity: 2050 x 2.0 mm POS 200 control system Year of manufacture: 2007

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, your competent partner for bending machines. Free delivery up to 150 km. Standard equipment includes piano inserts (segment-divided upper, lower, and bending beams) for a wide range of bending options. Cassettes and special profiles with opposing bends can be easily manufactured with this model. Swivel bending machine, universally applicable for sheet metal workers, repair shops, and roofing companies. Bjdjzuvbwepfx Aknswu Segments can be individually moved and removed. Segmented tools on all beams allow for ample space for complex workpieces. Bending machine SGR 1250/1.5 Technical data: - max. working width: 1250 mm Other dimensions 1000 mm and 1400 mm available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 250 kg Option to mount a guide rail for a roller shear: 300 EUR Accessory: roller shear (up to 0.8 mm): 350 EUR All prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 220 EUR.

Condition: new, Year of construction: 2026, This machine is located in Halver. We are your competent partner for bending machines. Bwjdpszuva Tsfx Aknsu We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers on site and consider ourselves an extension of the production department. Upon request, we can demonstrate the corresponding machines and provide expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The SGR-1000 model is characterized by removable upper and lower segments. In addition, the bending beam is divided into segments. Furthermore, a foot lever is mounted to open the upper bending beam. - Segments of an upper and lower clamping beam expand the range of applications. - Blocking with the help of a pedal allows the hands to be free, and a sheet can be freely positioned. - Bending machine for universal use in repair and body shops. - Compact design, modern shape. - Manual bending machine for standard tasks. - Segments of an upper clamping beam expand the bending possibilities. Technical data: - max. working width: 1000 mm - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 235 kg Option for mounting a guide rail for a roller shear: 300 EUR Accessory roller shear (up to 0.8 mm): 350 EUR All prices are subject to 16% VAT. CE certificate Warranty: 12 months. Self-collection Shipping within Germany: 180 EUR

Condition: new, Year of construction: 2026, BENDING BENCH technology KRUSE, YOUR competent partner when it comes to BENDING BENCHES Standard with piano inserts (segment-divided upper, lower and bending beam) for a large number of bending options Cassettes and special profiles with opposite bends are easy to produce with this model Swivel bending machine universally usable for tinsmith shops, repair shops and roofing companies Segments can be moved individually and removed Cant bench SGR 650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160° degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm Bjdpozuvbdsfx Aknjwu - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) - degree scale - passage 50mm Total length: 1000mm Height: 450mm Weight 60kg All prices are plus 19% VAT. Certificate CE Guarantee: 12 months. Pick-up is possible Shipping within Germany €100

Condition: good (used), functionality: fully functional, Simple and very robust machine; scope and condition as shown in the pictures; weight approximately 5 tons. Bwedpsz Hpyhsfx Aknou

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Bodpsy Ucycjfx Aknowu Specifications: Model: SCHRÖDER MAKU Year: 2022 Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Weight: 2.7 tons If you have any further questions, we will be happy to answer them.

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Model: PC 4000 Condition: very good Year of manufacture: Bwedpfx Aozxptbekneu Category ID: 1470 Type ID: 1258 Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Schechtl HBM 310 in like-new condition The machine is equipped with: ✅ a roller shear ✅ a foot pedal for single-person operation ✅ an angle stop for highly accurate repeat bending ✅ a support grid with depth setting ✅ a sheet metal bending rail for greater bending flexibility Bjdpfx Akez H I Hmjnswu Condition: • like-new technical condition • like-new visual condition • immediately available, no delivery time required • weight: 1480 kg ☑️An inspection and test run are possible upon request.☑️

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. Bwsdpfehbcxmox Aknju What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Our machine park is regularly supplemented, we use the best machines to guarantee the highest quality. We know all of our devices inside out. For years. And as a producer, we are always up to date. bending edge only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cut-outs to the side Recess 60mm / 45 ° Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.