Used Sheet Metal Deburring Machine for sale (93,700)

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / LISSMAC MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5 – 4.0 m/min, stepless Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS Brush Module-SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Dimensions (L x W x H x working width x sheet thickness): Infeed section: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module: Power Current Compressed air Extraction m³/h Weight 16 kW 32 A 6/80 bar 2,500/25 400 kg Brushing module: 12 kW 24 A 6/80 bar 2,500/725 1,600 kg Rotor module: 20 kW 40 A 6/10 bar 4,500/25 1,800 kg Discharge module: 1 kW 2 A - - 400 kg Fsdpexuu Dksfx Ah Ujgi Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5–4 m/min, stepless 1.0–8 m/min, stepless (option) Working height: 1,000 mm The external filter is not included in the sale. Processing width 1,500 mm, thickness up to max. 100 mm, vacuum conveyor runs the full machine width. The first unit is a grinding roller (sponge rubber roller covered with abrasive paper, pneumatically tensioned), which can also oscillate and levels the burrs. The second module consists of two steel wire brush rollers that round off/knock off the burrs. This is followed by a rotor module (rotating multi-brush head) for fine rounding. EC Declaration of Conformity Dry dust extractor is not included, but a suitable unit can be offered immediately (OPTION). Operating manual Machine is sold without infeed roller conveyor!

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t Fedpjvn Al Tofx Ah Uogi dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: used, Repair-needing Wide Belt Sander, Surface Grinding Machine, Sheet Metal Deburring Machine, Deburring Machine with 4 Processing Stations Sanding Unit and Brushing Deburring Unit Manufacturer: BÜTFERING - STEELMASTER Type: Frima-V/413RRTT Machine No.: 76 931 Year of Manufacture: 2002 2x Brushing Deburring Units + 2x Sanding Units Max. working width: 1350 mm Conveyor belt width: 1370 mm (heavily worn on the sides) Working thickness: 0.3 mm to 150 mm Sanding Units Abrasive belt dimensions: 1350 mm x length ?? mm Abrasive belt motor (1): 11 kW (speed 2930 rpm) Abrasive belt motor (2): 12.5 - 16 kW (speed 1470 - 2950 rpm) - Abrasive belt speed (belt 1): only at high speed - Abrasive belt speed (belt 2): 2 speed settings - Pneumatic belt tensioning Brushing Deburring Units with multiple vertical sanding discs and oscillation 2 roller brushes Ø 250 mm Roller width: 900 mm Brush speed: approx. 1440 rpm Deburr brush motor (3): 7.6 - 9.5 kW Deburr brush motor (4): 7.6 - 9.5 kW - Sanding disc speed (3): 2 speed settings - Sanding disc speed (4): 2 speed settings - Oscillating movement of brush rollers via gear motors - 2 separate drive motors, one for each brushing station Fgedpfx Asw Ed Uvsh Usi Conveyor Feed Unit Conveyor motor power: 0.75 kW - Infinitely variable conveyor speed via frequency converter - Motor-driven height adjustment for material thickness 0.3 - 150 mm Power supply: 400 Volt, 50 Hz, 55 kW Machine footprint: Length 300 x Width 270 x Height 210 cm Required space for transport: Length 600 x Width 242 x Height 210 cm Weight: approx. 5.5 tons The machine was operated with wet grinding; belt filtration system integrated in the machine frame The machine is in poor condition, was taken out of production, and stored under tarpaulin for approx. 5 months. Technically, everything still appears to be in reasonable shape, but improper storage has led to some rust formation. The machine requires refurbishment.

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Fedpfxsudb R Ij Ah Usgi Weight: 6200 kg

Condition: excellent (used), functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale With Spare Belts Fgsdpfxowbhtno Ah Uoi Ideal for sheet metal boxes

Condition: new, Sheet metal deburring machine similar to Timesaver Fgjdpfx Aext Dvyoh Usi

Condition: new, Year of construction: 2025, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications Fodpfoqzxhyex Ah Usgi -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 2,900 h, functionality: fully functional, working width: 1,350 mm, working height: 160 mm, Great deburring machine/surface finisher for dry finishing and one-side processing. Units: C25 + XRS-130 + C25 Working width: 1350 mm Belt length: 2620 mm Material thickness: 0.8 - 160 mm Unit description: - C25: Top sanding belt unit with roller diameter 250 mm - XRS-130: Orbital brush unit, brush diameter 130 mm - C25: Second top sanding belt unit with roller diameter 250 mm - SB-18: External Scotch Brite brush at machine exit (3 kW, diameter 180 mm) for surface finishing Fodpfxjxvb Tus Ah Ujgi Controlled via PLC-Vision B control panel. The machine is in good condition, with low operational hours (only 2,900 hours total), and is supplied with full documentation. Machine is sold complete with dust extraction unit and spare parts (belts). The machine has been inspected and refurbished by an authorized Costa service partner. Approximate weight: 4,800 kg.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Fjdsxnnfbjpfx Ah Usgi Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 500 kg, overall weight: 680 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 600 mm, table length: 1,300 mm, table width: 600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 600 mm, height adjustment type: mechanical, input current: 20 A, Equipment: CE marking, documentation/manual, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a trusted and experienced company specializing in metal and woodworking machinery. With decades of expertise and innovation, Madora is known for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial clients across Europe. Our machines are designed for precision, performance, and long-term reliability—all at competitive prices. The smallest model in the MADORA range, the GP 600 2Z, is a versatile deburring machine for cleaning sheet metal after various cutting processes. Equipped with two "Z"-type machining units, it offers outstanding flexibility and high machining capacity. The machine can perform two operations simultaneously: not only can it remove scale after plasma cutting, but it is also able to deburr or round the edges of workpieces after laser cutting—all in a single pass. Its machining width of up to 600 mm allows for the efficient processing of small and medium-sized components. With suitable tooling, the GP 600 2Z handles heavy edge rounding and oxide removal as well. Fedpowzu A Nsfx Ah Ujgi The GP 600 2Z deburring machine features an electronic numeric control panel, which allows the operator precise and continuous adjustment of machining parameters such as workpiece height, feed rate, and tool rotation speed. Each machining unit can be controlled independently, giving the operator full flexibility to select the required process steps within a single pass.

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fgsdpfowbh Dysx Ah Usi Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: used, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SN078146, 12 months warranty / 1800 operating hours Fodoxp Nd Ispfx Ah Uegi

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 300 mm, sheet thickness (max.): 150 mm, pass-through width: 300 mm, nominal power: 7.5 kW (10.20 HP), LÖWER SmartGrinder SG 300 K Wet Grinding Machine for Grinding or Deburring Metal - 1 contact roller unit with height adjustment via gear and handwheel Fedpfjxbpt Hsx Ah Uogi - Workpiece thickness: 0.5 - 150 mm - Abrasive belt size: 300 x 3000 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing 240 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing approx. 505 mm (6 sections) - Drive motor: 7.5 kW - Ammeter for performance display - Infinitely variable feed speed via conveyor belt: 2 - 9 m/min - Digital counter with zero reset (instead of absolute counter) - Upper tank with drain opening D = 120 mm - Two jet water nozzles, completely piped - Rubber-coated and grooved contact roller, 150 mm diameter - Contact roller hardness: 65° Shore - Additional HT grinding wheel, roller grit 120 - Infinitely variable abrasive belt speed: 7.5 - 22 m/s, adjustable via frequency converter and potentiometer for matching cutting speed during deburring or finishing - Grooved rolls for abrasive and conveyor belts - Height adjustment via handwheel, with digital display - Manual paper band filter with perforated sheet filter carrier above the settling tank. Includes holder, reel, and fleece roll. The filter fleece must be advanced manually. - Infeed guard with emergency stop - Additional rubber-coated pressure roller - Pneumatic belt tensioning - Rubber-coated spring-mounted pressure rollers, height and distance adjustable - Settling tank with matching pump - Dimensions (L x W x H): 1700 x 900 x 2400 mm - Weight: 685 kg - Operating voltage: 400 V, 50 Hz, 3-phase - Operating pressure: 6-8 bar - CE compliant Various VSM grinding fleece (100/180/240), approx. 3 pieces each at €153.00 each Various VSM zirconia alumina (80/120/240), approx. 15 pieces each at €16.35 each The machine has barely been used (only once in 2025!) and is in like-new condition! Absolutely WITHOUT defects Original price over €29,000 + VAT

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: Fgsdexn Ifuspfx Ah Usi 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Feeding belt 1350 mm.

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Main switch, emergency stops Disc brake Electrical specifications: Power: 28.05 kW Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Fjdpfsxc H Rfjx Ah Ujgi Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System. Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Fjdpfx Aji E Tkaoh Uegi Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Fgsdpfx Ahexmi Saj Usi

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made from different materials without the need for constant abrasive changes. • Functionality: Fgsdpfx Ahoxmhxxj Usi Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required.

Condition: excellent (used), Timesavers Series 42 WRB Machine technically overhauled, operates flawlessly. 1st station: Grinding unit for removing pronounced burrs and splatter; surface finishing with Scotch band is also possible. 2nd RB brush unit, 8 deburring rollers for all-around, uniform edge rounding. Working width of 1350mm. Vacuum conveyor belt Conveyor belt speed infinitely adjustable via potentiometer Brush speed infinitely adjustable via potentiometer Part thickness from 0.8 to 100mm Additionally included: dry dust collector Machine available from mid-November. For further questions, feel free to contact us directly. Fodpfx Ahoxl A D Te Usgi

Condition: new, Year of construction: 2025, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel Process: Edge Rounding Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm. Fjdpfxjui Ih Rj Ah Ujgi Minimum Part Dimensions: 50 × 50 mm. Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Machine Weight: 3.000 kg

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use Fgodpfx Aeiih Aaeh Uei -Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line.

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Fedpfohq A T Ujx Ah Uegi Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. Fjdehq A Txspfx Ah Usgi -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workfl Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility TFON – Surface perfection, every time.

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Fjdehq Dbmjpfx Ah Uogi Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time .

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Fsdpfxohq Dbxo Ah Usgi Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year