Used Sheet metal deburring machines for sale
Your detected location:
United States
Metal processing machinery
Deburring machines
Sheet metal deburring machines
4
Demonstration machine
Machine equipment
1st and 3rd group R - abrasive belt unit
- diameter of rollers 180 mm
- Rubber hardness of rollers Shore 55 sh
- Pneumatic on-off switch - roller adjustment up-down "grain size
- Main motor power 7,5 kW
- Analog ammeter
- Grinding belt oscillation by electronic photocell
- Vibration adjustment width and time
- Automatic star-delta switch on main motor
- Automatic brake on the abrasive belt motor
- LED display for brake wear control
- Rotation speed in f...
5
max. working width: 1000 mm
workable material thickness: 0,5 - 50 mm
Working hours machine: 600 h
Total power: 82 A
Total current consumption: 44,5 kW
B2jk2srpni
Insulation class: IP 42
Infinitely variable feed speed: 0-4 m / min
Adjustment of material thickness: elektrisch
Adjustment of tools: elektrisch
Length: 3100 mm
Width: 2100 mm
Height: 2000 mm
Machine weight: 3800 kg
Standard configuration
Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of t...
6
diameter 150 mm
workpiece length 1300 mm
work piece width 800 mm
max. dia. of grinding wheel 150 mm
turning speed range 0 - 2830 U/min
work height max. 945 mm
milling-head swivable +/- 180°
engine output 1,5 kW
weight of the machine ca. 230 kg.
dimensions of the machine ca. 1435 x 1100 x 1510 mm
The "Easy T" is the cost-effective alternative to the conventional ones
grinding and deburring machines. His head consisting of a grinding wheel
and a flap brush, can be swiveled by 180°. Thus, a f...
10
plate thickness 5,0 mm
turning speed range 1500 / 3000 U/min
diameter of brush 250 mm
width of brush 80 mm
voltage 380 Volt
total power requirement 2,4 / 3,0 kW
weight of the machine ca. 175 kg
dimensions of the machine ca. 700 x 460 x 1200 mm
Cbgl38yfcp
Description :
RASAMAX DUO was specially developed for the fast and reliable
developed for deburring straight sheet metal. The deburring machine
has two counter-rotating deburring brushes that
two offset levels. With this principle, upper and
...
9
Second-hand machine
year of manufacture: 2010
Chdkqooc
including dry exhaust TEKA Filtercube 2N and sanding belts
working width: 1000 mm
machine for top/bottom processing
with 1x cross sanding belt and 1x deburring unit incl.
Immediately available
10
Deburring and finishing machine
Manufacturer: TimeSavers
Model: Series 1200
Ccy9aaf2pi
Type: 12-Series-600-W
Year of manufacturing: 2009
Working-width: 600mm
Height-adjustment: 0-125mm
Deburring speed: 1,5 - 9 m/min
Diameter of deburring-roller: 150mm
5
Sheet metal deburring machine make KUNZ type K 2
Ba2umksw0v
Machine # 3126
Technical data:
max. sheet thickness 8.0 mm
number of brushes 2
brush diameter 300 mm
motor power 2 x 2 kVA
dimensions L x W x H 1000 x 700 x 600 mm
weight approx. 150 kg
with
- additional wire brushes
used, in good condition
The ideal machine for companies with a smaller capacity requirement that need the industry leading Rotary Brush edge rounding technology that was made famous by our 32 RB and 42 RB series. This machine enables customers that mostly process small parts, with small quantities and corresponding budget to deburr, edge round and finish parts perfectly.
Table opening 0 - 100 mm
Transport speed 0,5 - 8 m/min
Brush diameter 300 mm
Contact roller diameter 150 mm
Application: Deburring ✓
Application: Edg...
10
diameter mm
workpiece length mm
work piece width 1350 mm
workpiece height mm
work height max. mm
grinding band dimension mm
Band Speed m/sec.
feed speeds 1 - 10 m/min
conveyor belt mm
Required air-pressure bar
Ccfg320k0j
voltage V
control voltage V
frequency Hz
m³/sec.
total power requirement 41 kW
weight of the machine ca. t
6
diameter of brush 250 mm
width of brush 80 mm
turning speed range 1500 / 3000 U/min
voltage 380 Volt
total power requirement 2,0 / 3,0 kW
weight of the machine ca. 175 kg
dimensions of the machine ca. 800 x 400 x 1.300 mm
D3dla30n
Furnishing:
- Deburring of handy sheets with notches and contours
- Sheet thicknesses up to 6.0 mm are rounded quickly and safely
- without forming a secondary burr
- The sheet to be processed is manual with light pressure
guided along the rotating deburring brush
...
9
Used machine
Year of manufacture: 2017
immediately available
Location: 1A Maschinen GmbH, Demonstration Center Sielenbach
Dgxuzci
Rotating discus machine, working width 900mm, for
deburring and finishing of flat parts and
surface cleaning in all directions.
Dry version with one disk unit - RD,
equipped with an abrasive fleece disc. Further the
machine is equipped with a
abrasive belt unit - W - in front of the disc unit for pre-deburring
Pre-deburring or fine grinding.
Technical data:
Workpiece...
2
messurements (LxWxH): 1300 x 800connection performance: 1,5
Bdf8cinz32
2
working width 1380 mm
workpiece height 70 mm
total power requirement 45 kW
weight of the machine ca. 5.500 kg
Ewaufg9
dimensions of the machine ca. m
The 42 RB series offers the solution for manufacturers who supply premium quality products. This top quality is achieved through a multi-rotating brush head with eight abrasive flap brushes that deburr uniformly and round the edges of the metal perfectly. This machine can achieve a radius of 2 mm on mild steel and even more on softer material like aluminium.
Table opening 0 - 100 mm
Transport speed 0,2 - 8 m/min
Brush diameter 350 mm
Contact roller diameter 180, 280 and 450 mm
Application: Debu...
6
diameter -- mm
workpiece length -- mm
work piece width 1350 mm
workpiece height 4 - 150 mm
work height max. 850 mm
Bu3adrafzp
grinding band dimension 1400 x 2500 mm
Band Speed 22 m/sec.
feed speeds 3 - 15 m/min
conveyor belt 1350 x 2200 mm
Required air-pressure 5 - 7 bar
voltage 220 / 380 V
control voltage 220 V
frequency 50 Hz
1,5 m³/sec.
total power requirement 24,5 kW
weight of the machine ca. 2,0 t
suction Dustomat-160S year 2003
Smallest workpiece length: 4 mm
2
diameter 150 mm
workpiece length 1300 mm
work piece width 800 mm
max. dia. of grinding wheel 150 mm
turning speed range 0 - 2830 U/min
work height max. 945 mm
milling-head swivable +/- 180°
Iqjrqyr
engine output 1,5 kW
weight of the machine ca. 230 kg.
dimensions of the machine ca. 1435 x 1100 x 1510 mm
The "Easy T" is the cost-effective alternative to the conventional ones
grinding and deburring machines. His head consisting of a grinding wheel
and a flap brush, can be swiveled by 180°. T...
5
Serial number: 2600-07
Year of manufacture: 2022
New machine / Demonstration machine
General description of the machine:
Timesavers hammerhead machine, working width.
900 mm, with one hammer head (H) for slag removal
slag removal and a sanding belt unit (W) for burr removal or finish sanding.
.
General specifications:
Vvufha
Max. Working width: 900 mm
Table opening: 0.3 - 125 mm
Machine is available immediately.
Viewing and testing is possible at any time with us.
13
Lissmac SBM 900 Deburring Machine (Year: 2016)with DDE 3000 Extraction Unit (Year 2020) + Complete Edge Breaker Brush Set.
The machine was a demonstration piece. operating hours 616 hours
Lusukcof
6
IVariable feed speed 0 - 31 m / min
Gcwpoj7
Without sanding belt guide !!!!
7
Timesavers series 22 WMdW
working width 900mm
Table opening 1-125mm
1st unit Grinding unit for pre-grinding of high burrs and laser spatter.
2nd aggregate Md: Multidisc, 6 disc plates (d=150mm) staggered side by side for a high quality deburring finish. Oscillation for ideal results and uniform wear.
3. aggregate grinding aggregate for surface finish
B9ekxzbut3
Special equipment:
-Frequency controlled main motor for multi-disc aggregate with infinitely variable disc speed adjustment.
-Carpet cl...
4
SPECIFICATIONS:
Length 2000 mm
Width 3000 mm
Height 1800 mm
Weight 3500 kg
Working width 1400mm
Material thickness 1-70mm
Min. part length per for magnetic or vacuum belt 80mm
Tank capacity 200 l
Feed speed of the conveyor belt 1.5-8 m/min
Supply voltage 400V
Network frequency 50Hz
Compressed air connection 5bar
Deburring paper sheet size 1540x1400mm
Equipment:
Process performed "wet"
Fluid filter
Width of vacuum line 300mm (for small non-magnetic parts)
Magnetic line width 300mm (for small ma...
4
- Demonstration machine in mint condition-
- 180° swivel head for rounding and deburring
Gut92wz
- Ergonomic working
- Uniform rounding
- Processing of small parts possible
- anti-slip mat
6
motor power:
2,6/ 3,3 kW
r.p.m.:
1500/3000
X7hbmdmq
working place 1 or 2:
1 or 2
max. abrasive- ∅:
250 mm
max. abrasive width:
100 mm
shaft- ∅:
30 mm
weight:
180 kg
description
Up to date demands on quality and safety requires workpieces without burr.
* sharp edges or burr developed by sawing, milling or mechanical processing would be smooth after work on this machine
* height adjustable table
* infinitely variable distance of table to the abrasive (best support and more safety)
9
Used PEDRAZZOLI MDB 102 / 4500 Automatic deburring machine
Used , year of manufacture 2002 "CE".
The MDB 102 performs automatic finishing of tube ends, as a unit
independent or connectable to cutting lines. The adjustment of the working length, vertical and horizontal position of the brushes is easy thanks to easily accessible handwheels.
Tube min -max mm 12 - 102
Max load capacity Kg 1500
Roller length Brushes mm 450 Ø mm 300 ,
Max deburring length mm 4550
Overall dimensions of the installed li...
5
Used 32 Series 1100 WRB including extraction system from Ulmatec. Both from the year of construction 2019 and in very good condition with approx. 257 operating hours.
The 32 WRB series is the mid-range machine offering versatility for deburring, edge rounding, finish grinding, laser oxide removal of various materials.
Bzkpumkjq
Extraction system from Ulmatec in Atex design. Suitable for steel, stainless steel and aluminum including pipes.
Plant can be visited at any time.
Table opening: 0-1...
1
The machine is suitable for deburring or surface grinding of punched or plasma-cut flat sheet metal parts. The machine is built according to the accident prevention regulations EN 294 and provided with the CE - sign.
Machine is in a good condition.
In 2019 the machine was added due to deburring work.
Running time 2 months per year.
min. Part length without vacuum 350mm. With vacuum min area is 150cm² with min part length 100 x 150mm.
Max. Sheet width is 1400mm .
Accessories:
- Vacuum blower for ...
11
- Suitable for Mild steel, Aluminum and Stainless steel.
- (0-120mm) working thickness range
- CE Certified.
- Radius 2 edge rounding performance
- Siemens automation system
- All stations can work as seperately.
B7j288uz0t
- There are 650 / 1000 / 1300 mm table working alternatives.
- There are magnetic, vacuum, magnetic + vacuum table working alternatives.
- It removes light burrs, sharp and sharp edges formed after laser cutting.
- It ensures that the steel surface of the part is cleaned fro...
5
COSTA belt and brush sanding machine
with Keller extraction cabin CABIN-STAR EZM
and extensive accessories
Make: COSTA Levigatrici S.p.A.
Model: MSH2 CCSS+s 1350
Year of manufacture: 2003
Working width: 1350 mm
Max. Passage height: 100 mm
Sanding belt length: 1380 x 2620 mm
Number of aggregates: 4
Arrangement of aggregates: 1st aggregate / sanding belt
2nd aggregate / sanding belt
3. aggregate / roller with sanding brush
4. aggregate / roller with sanding brush
Accessories: Manuals
Make: KELLER ...
4
working witdth 600mm
Bcohnszlpi
4
Deburring machine for deburring and all-round edge rounding of punched laser waterjet and flame-cut parts
part thickness from 0.5 --100mm
Max part width 600mm
Smallest parts 40x40mm
Machine with wide belt pre-grinding station for high burr or surface finsh
Rotary brush carousel for edge rounding
Easy handling
Quick tool change for material mix steel and VA
Brm0973jbz
Extremely long tool life
100 % uniform result on all sides
With associated wet suction
Robot in working condition
Bjbwfu7wa
all conveyour fully functional
10 pcs pneumatis drilling&grinding tools fully functional
Safety fully functional
Siemens TP270 TOUCH-10 CSTN
Siemens ProfiBus comunication
any customer is welcome to test unit
6
2020 Deburring-Edge Rounding- Finishing machine F200 XL with magnetic support combined with a WES3000 wet operating extractor and tubing
Pre-owned F200 XL-MAG machine in combination with a wet operating dust extraction system (demo model). Set comes including tubing and with a 1 year warranty.
F200 XL deburring machine: the small parts specialist.
Suited for sheet metal parts between 15 and 200 mm wide. Deburring, grinding and edge rounding at high speed.
Mw3paw
The F200 XL is a 3 station fin...
8
- Suitable for Aluminum, Stainless and Mild steels.
-(0-120mm) working thickness range
- Specially produced for Finishing
Julnpjk
- Suitable for Medical, Industrial Kitchen equipment, Automotive, Metal accessories sectors.
- CE Certified.
- Radius 2 edge rounding performance
- Siemens automation system
- Independent stations
- There are 650 / 1000 / 1300 mm table working alternatives.
- Machine conveyor can be produced with optional vacuum or semi-magnetic + semi-vacuum.
- It is ensured that the...
2
Brush deburring machine make RSA type STL III
machine. # BIII 3-7262, year of construction 1986
for tubes, profiles, solid material and sheets
Technical data:
Workpiece diameter unlimited
Jwf2hevju
Brush diameter 250 mm
brush width 60 mm
Operating and protection class S 6-60% IP 44
electrical connection 380 V
connected load 2/3 kW
Speeds by pole-changing. Motor 1500/ 3000 rpm.
External dimensions 650 x 450 x 1150 mm
Weight approx. 75 kg
Colour green
used, in good condition
5
Slag Grinding machine with 2 sanding belt units and an oscillating wire brush. The system is optimally suited for the processing of flame cutting / plasma parts. The machine was little used and is in very good condition
1. Station sanding belt unit, roll diameter 180 mm, 90 ° Shore, for rough burr removal
2. Station sanding belt unit, roll diameter 280 mm, flexible 45 ° Shore, for the surface machining and edge rounding
X222ornp9
3. Station, wire brush roller oscillating with 280 mm diameter, c...
4
Turbo-Line 120- centrifugal finishing machine
With round working container, vertical lamellar wall segments and rotating plate-shaped base with adjustable speed. The compact machine is detachably mounted on a base frame.
In order to achieve a long service life, the working container and base are each to be equipped with a minimum
22 mm thick PU coating.
The 120L container can be filled with 55 L. (responds to about 75 kg.) product/compound per batch, depending on the shape of the workpieces.
The...
1
Item number: MA977
Manufacturer: RAS
Type: Rasamax ST Duo
Year of manufacture: 1987
Machine-No.: ST-Duo 1055
Length [mm]: 650
Chsc7kxe
width [mm]: 600
height [mm]: 1200
weight [kg]: 190
Connected load: 380V / 1,4KW
Number of tool stations [pcs.]: 2
Gear [rpm]: 1500 / 3000
accessories: base cabinet / roller conveyor / spare grinding wheel
2
Precision edge milling machine Reiter PKF 300
With underframe and vacuum cleaner
Max. speed: 24.000min
Milling cutter speed infinitely variable
O28zv