Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
table diameter: 2000 mm faceplate diameter: 1800 mm swing diameter with side support: 1850 mm swing diameter without side support: 2000 mm cross rail adjustment: 1150 mm M8yh7 turning height: 1250 mm vertical adjustment of the supports: innen/außen 30° mm distance face plate/tool carrier: 1325 mm workpiece weight: 6000 kg workpiece height max.: 1250 mm dimensions electric cabinet LxWxH: 1,2x0,7x1,15 m revolution per minute: 1-50 / 2step U/min height over floor: 950 mm feed: 0,01-6,3 / 12 step m... more
5
faceplate diameter:2240 mm swing diameter:2500 mm turning height:1600 mm slides vertical travel:1200 mm workpiece weight:16 t C2ljnkm88 horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
5
faceplate diameter:2500 mm swing diameter:3300 mm turning height:2280 mm max. workpiece weight:30 t table speeds::1-150 U/min main drive:51 kW Myco9 feeds:1-4.000 mm/min rapid speed:12/8 (X/Z) m/min Overall size:7.530 x 5.440 x 7.700 mm weight of the machine ca.:51 t CNC controller:Siemens 840D automatic tool changer:12 fach more
4

Carousel lathe DOeRRIES SCHARMANN CONTUMAT 2

FeldkirchAustria dealership location
6764 km
1998
good (used)
There is a carousel lathe in very good condition for sale! Ptiqde Refer to technical data based on the pictures! For questions or if you are interested we are gladly at any time at the disposal! more
4

single column vertical lathe DÖRRIES SD 180

Schlinckstrasse 1, 21107 Hamburg, DEGermany
6487 km
1979
ready for operation (used)
Arbeitsbereich: Größter Umlaufdurchmesser: 2000 mm gr. Abstand Planscheibe bis Unterkante Meißelhalter: 1450 mm Unterkante Querbalken: 1150 mm Ss0xy8 Querbalken verstellbarkeit: 850 mm größter Meißelweg senkrecht/waagerecht: 750 mm / 1230 mm Schnellverstellung in 2 Richtungen Schwenkbar bis 45° Meißelhalter für 5 Meißel Revelverkopf, Anzahl der Werkzeugaufnahmen 5 Planscheibe: 1800 mm durchmesser, Bskucmq3 T-nuten 28/48x20 Sondereinrichtung: Gewindeschneiden, Kegeldrehen, Kopierdr... more
6
faceplate diameter unbkt. mm swing diameter unbkt. mm Tweapjc turning height unbkt. mm Control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
faceplate diameter 2200 mm swing diameter 2500 mm turning height 1700 mm turning speeds 1,6-80 U/min Feed 0,004-1800 mm/min max. ram stroke 1200 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m E7c27xajm more
9

Vertical Lathes Double column ČKD BLANSKO - OS SK 25 A

Tuřanka 104 CTPark, 627 00 Brno - Slatina, CZCzech Republic
7122 km
2017
refurbished (used)
Vertical Lathes Double column SK 25 A Ndbtr Producer: ČKD BLANSKO - OS YP: 1963 / 2017 (overhaul in 2017) Max. Workpiece diameter ... 2500mm Clamping table surface ... 2400mm Max workpiece height ... 1600mm Max. Table load ... 12000kg l x w x h ... 6300 x 6600 x 5640mm Machine weight ... 54320kg The machine is fully equipped, with one year warranty. more
5
turning height:2500 mm faceplate diameter:2800 mm swing diameter:6000 mm Bjvnoghk weight of the machine ca.:54 t total power requirement:65 kW table speeds:2,12-112 1/min Travel of Ram (vertical):1000 mm Travel of ram (horiz.):915 mm table load:50 t feeds:0,71 bis 128 mm/min rapid power traverse in X-and Z direction:2000 mm/min 4 jaw chuck:6000 mm DRO:HEIDENHAIN hard jaws:6 Stk. Used Single column vertical lathe The machine is in a good condition and no repair work on the X and Z axes needed... more
6

Vertical turret lathe ČKD Blansko SK 25

Králova 279/9, 61600 Brno, CZCzech Republic
7113 km
1961
good (used)
In 2004 was Ward Leonard replaced with the DC converter. Diameter of clamping plate: 2400 mm Bb7i7n7ew7 Swing diameter: 2600 mm Turning height: 1600 mm Max. turning diameter (side support): 2500 mm Max. turning diameter (cross support): 2600 mm Max. distance between the clamping plate and the blade holder of cross support: 1600 mm Max. distance between the clamping plate and the the blade holder of side support: 1340 mm Cross support traverse: 1400 mm Cross traverse speed: 500 mm/min ... more


Vertical t...
every day

New machines via email!

Be informed!
7

Vertical lathe UMARO SC 22

5 OradeaRomania dealership location
7574 km
1981
good (used)
Faceplate diameter 2000 mm Rgf0p3rd Max. turning diameter 2150 mm Max. turning height 1500 mm Max. workpiece weight 12000 kg Main motor power 55 kw Machine weight 32000 kg Location: our warehouse near Oradea/Romania. more
15
GO: 1993 Table diameter: 2400 mm Working diameter from support: 2500 mm Working diameter from cross section: 2600 mm Max.height: 1340 mm Distance between stands: 2700 mm Max. Workpiece weight: 10000 kg Clamping jaws: 4 Tool holders: 1 Bb0ganwa2b Engine power: 256 kW Machine weight: 42 300 kg more
6
faceplate diameter 2800 mm swing diameter 3200 mm B9rbra7 turning height 1500 mm slide adjustment 1200 mm turning speeds 50 U/min Control Sienens 840 D side head - cross travel 900 mm power capacity 55 kW workpiece weight 16 t total power requirement kW weight of the machine ca. 50 t dimensions of the machine ca. m The engine was rebuilt in 2008/2009 to CNC control Siemens 840 D. The right support is operated CNC and the face plate. The left side of the support and assistance are conve... more
2

Vertical Turning Lathe SC27 retrofitted

BUCHARESTRomania dealership location
8008 km
2017
good (used)
Double Column Vertical Lathe model SC 27, with following technical data: Manufacturer: FMUA after MORANDO licence (Romania) YOM: 1987 • MAX. TURNING DIA.: MM 2650 • TABLE DIAMETER: MM 2500 • MAX. TABLE LOAD: KG 15000 • MAX. ADMITTED WORKPIECE HEIGHT: MM 1900 • MAIN MOTOR POWER: KW 60 • TABLE SPEED RANGE: 1-112 RPM • LEFT-HAND HEAD TRAVEL: MM 1200 • RIGHT-HAND HEAD TRAVEL: MM 760 • CROSS RAIL VERTICAL TRAVEL: MM 1600 • TOTAL MACHINE WEIGHT: KG 40000 The machine will be retrofitt... more
1
faceplate diameter:2500 mm swing diameter:2700 mm turning height:1900 mm engine output:60 kW 3ncp3yalq weight:40000 kg more
5

Vertical turret lathe with DRO UMARO SC 22

Králova 279/9, 61600 Brno, CZCzech Republic
7113 km
1978
excellent (used)
Clamping plate diameter: 2000 mm Max. turning diameter: 2200 mm Max. workpiece height: 1200 mm Main engine power: 55 kW Bbqrsgikec Machine equipment: - vices for clamping of workpieces: 4 pcs - supports are equipped with a "H" tool holder - mechanical and electrical documentation - tool cooling - digital read out Newall more
6
faceplate diameter 2500 mm max. turning diameter: 2650 mm turning height: 1900 mm workpiece weight: 15000 kg turning speed range - faceplate: 1,24 - 112 U/min vertical adjustment of the crossrail: 1500 mm crossrail -rapid travel: 400 mm/min ram head swiveling: +/- 35 ° ram head - cross travel: 1450 mm ram head - vertical travel: 1200 mm feeds: 1 - 4000 mm/min main drive motor: 55 kW voltage: 380 V Bkxd7xp frequency: 50 Hz total power requirement: 75 kW weight of th... more
4

Vetical lathe UMARO SC 22 Bau 1978

BrnoCzech Republic dealership location
7116 km
1978
good (used)
Diameter of the clamping plate: 2000 mm Bpckful8 Max. turning diameter: 2200 mm Max workpiece height: 1200 mm Engnie power: 55 kW more
6
faceplate diameter 2500 mm swing diameter 2800 mm turning height 1500 mm workpiece weight 12000 kg max. ram stroke 1300 mm total power requirement 45 kW Waqbwdsrj weight of the machine ca. t dimensions of the machine ca. m more
6

Vertical lathe

Zitavskeho 496, 15600 Praha 5 - Zbraslav, CZCzech Republic
6934 km
excellent (used)
Year: 1978 Max. diameter of workpiece : 2200 mm Clamping diameter of rotary table : 2000 mm Max. workpiece height : 1200 mm Max. load of table : 12000 kg Main motor power : 55 kW The machine is in good condition, possible to test it. DRO. Accessories: 4 pcs vice for clamping of workpieces Bbx8ptpzlb supports equipped by H toolholder cooling of tools Contact me for price and more information. more
9
Vertical Turret Lathe RAFAMET KCF 200. Technical parameters: Maximum turning diameter: 2400 mm Maximum height of the workpiece: 1250 mm Total power demand: 45 kW Bbx9j0xinz Length of the lathe: 6100 mm Width of the lathe: 5000 mm Height of the lathe: 5500 mm Weight of the lathe: 50 t Equipment: Technical documentation more
5

Vertical Turret Lathe with DRO UMARO SC 2500

Králova 279/9, 61600 Brno, CZCzech Republic
7113 km
1974
excellent (used)
Clamping plate diameter: 2500 mm Max. turning diameter: 2600 mm Max. workpiece height: 1700 mm Main engine power: 55 kW Machine equipment: - vices for clamping of workpieces: 4 pcs - supports are equipped with a "H" tool holder Bq77saug - mechanical and electrical documentation - tool cooling - digital read out more
5
Platediameter 2000 mm Max. turningdiameter 2250 mm B30su9m max. turning height 1900 mm max. 125 U/min. more
2
New DC converter Ward Leonard (2004) Turning diameter: 2600 mm Turning height: 1600 mm Ram stroke: 1000 mm Ram dimensions: 200 x 200 mm Faceplate speed range: 1:18 - 117 (2 stages rpm) Torque: 64 kNm Hjotrb9 Rapid: 8 m/min Main motor: 89 kW AC Workpiece weight: 10 t Feed speed: 6000 mm / min Cutting force: 70 kN Total power requirement: 120 KVA Machine dimensions: 6500 x 4500 x 6000 mm Machine weight: 40000 more
6
faceplate diameter 2800 mm swing diameter 3200 mm turning height 1600 mm slide adjustment 1200 mm turning speeds 1,25-63 U/min side head - cross travel 900 mm power capacity 55 kW main drive motor 55 kW total power requirement 69 kW weight of the machine ca. 50 t dimensions of the machine ca. 6,1x5,5x4,91 m The engine was rebuilt in 2008/2009 to CNC control Siemens 840 D. The right support is operated CNC and the face plate. Bb70kxt7jl The left side of the support and assistance are convent... more
10

CNC Vertical Turret Lathe MAG VTC 2500 CNC

Ronsdorfer Strasse 143 143, 40233 Düsseldorf, DEGermany
6392 km
2014
good (used)
CNC Twin Pallet Vertical Mill/Turning Centre CNC control Siemens 840DSI Solution Line 2 x Chucks Size 2500 mm. Maximum swing 2700 mm. Height table to ram 3300 mm. Maximum Work Height 3212 mm. Max. component weight 30,000 Kg. Live Spindle Speeds 6-2000 rpm. Milling Spindle Up to 4000 rpm. Ram Section 250 x 250 mm. Max. tool length 700 mm. 25 Station Auto Tool changer (5 Wedgeloc, 1 live spindle). Built in Coordinate Measuring (CMM) Feeds & Traverses: Z Axis Ram Travel 1750 mm.... more
6

Vertical Lathes Double column Umaro SC 2500

Tuřanka 104 CTPark, 627 00 Brno - Slatina, CZCzech Republic
7122 km
1974
excellent (used)
Vertical Lathes Double column SC 2500 Producer: Umaro YP: 1974 Gfkttkqck Max. Workpiece diameter ... 2600mm Clamping table surface ... 2500mm Max workpiece height ... 1700mm Max. Table load ... 15000kg Main motor power ... 55kW The machine is in very good condition, it is possible to test it under power. Additional digital dimension. Main engine Siemens. The accessories: 4 pieces vices for clamping the workpieces, cooling of the tools more
4
Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Voskc Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2... more
6
Max. working diameter 2500 mm. Kkjqca3j Max. working height 1600 mm. Max. workspice weight 16 ton. Main motor: 40 kW Modernisation new 2010 more
5

Vertical lathe UMARO SC 2500 Bau 1974

Janska 12, 60200 Brno, CZCzech Republic
7116 km
1974
good (used)
DRO Diameter of clamping plate: 2500 mm Max. swing diameter: 2600 mm Max. workpiece height: 1700 mm Engine power: 55 KW Yrqnd0 Accessories: 4 clamps Supports are equipped with a H tool holder Tools cooling more
3
faceplate diameter 2500 mm turning height 1500 mm turning diameter over bed 2700 mm turning speeds 1,9 - 60 (16x) U/min voltage 380 V total power requirement kW weight of the machine ca. t 3hhbjfiwq dimensions of the machine ca. m more
1
 Diámetro max volteo 2200mm.  Altura máxima 1.000 mm  Desplazamiento max lateral 2000mm.  Recorrido del barrón 800 mm Ga2i93hxm  CNC Fagor 8055  Travesaño móvil  Diametro plato 2.000 mm.  Gama de velocidades 4  Rpm del plato 120  Maquina retrofitada en el año 2012 more
1

VTL TITAN sc 22

KarlsruheGermany dealership location
6598 km
1986
used
VTL TITAN SC22 2 220 x 1 500 mm Price 46 000,00 USD Vertical Boring Machine TITAN SC 22 The machine is in good, working conditions. Year of manufacturing - 1986 Dv3wja Faceplate diameter - 2000mm Swing - 2200mm Working height - 1500mm Table capacity - 12000kg Dimensions - 4600x4300x4200mm Weight - 32000kg more
5
Table diameter 2800 mm swing diameter 3200 mm Gflfprbug turning height 1600 mm max workpiece weight. 16000 kg faceplate turning speed range from 1.25 to 63 U / min total power requirement 55 kW Weight 43000 kg more
6

CNC Vertical Turning Machine GMW VTM 4000 CNC

D - Nordrhein-WestfalenGermany dealership location
6422 km
2011
used
CNC machine with C- axe and live tooling. Faceplate diameter is 2800 mm with an adapter plate of 3800 mm. Max. workpiece Diameter is 4000 mm with a turning height of 2000 mm. 1 vertical head with 1250 mm stroke. Adjustable crossrail with 1550 mm stroke. Max. workpiece weight on hydrostatic faceplate is 40 tons. Dsiaikp Speed of faceplate 2,5 - 80 rpm. Control: Siemens 840 Dsl more
6

Vertical Turret Lathe Stanko 1512

Europa - NiederlandeNetherlands dealership location
6240 km
1977
used
J7eekpy Make: Stanko Type: 1512 Chuck diam: 1.130 mm ø Max. swing: 1.500 mm ø 3-/4-jaw: 3 : 1.130 mm ø Year of make: 1977 Stock Number: draai489 more
6
faceplate diameter 2500 mm swing diameter 2800 mm turning height 1500 mm 3vtovf3dn workpiece weight 12000 kg max. ram stroke 1300 mm total power requirement 45 kW weight of the machine ca. t dimensions of the machine ca. m more
6
Year 1989/2009 (Retrofit) Control Siemens 840 D Face Plate diameter Ø 2.800 mm Max. Swing Ø 3.150 mm Max. Height 1.500 mm Max. load 16 Tons R.P.M. 1,25 - 63 kW 55 Volts 400 Wyamaju7v Cycles 50 Dimensions L x W x H 5.100 x 6.400 x 5.100 mm Total weight 43 Tons Including: 1x Turret head CNC 1x Ram head Conventional 1x Side head more
1

VTL SEDIN 1525

Russische FöderationGermany dealership location
6598 km
1980
used
Fvqobjeh3 VTL SEDIN - 1525 2 500 x 1 600 mm Price FCA Russian plant 29 750,00 Euro Vertical Turning Lathe Manufacture: SEDIN, Krasnodar, Russia Model: 1525 YOM: 19 Condition: The machine is now carefully disassembled and located in Russia. Machine in complete condition. Technical specification: Number of supports - 2 pcs Swing diameter - 2500 mm Table diameter - 2240 mm Turning height - 1600 mm Max detail weight - 16.000 kg Engine power - 40 kW Overall dimensions - 5065 X 5340... more
4
Table diameter: 1800 mm Swing: 2000 mm Working height: 1250 mm Table speed: 1-71 rpm Ram stroke: 700 mm Ban82p3ics Max work-piece weight: 10000 kg Max cutting capacity: 6300 kg Motor power: 38 kW Machinery dimensions: 4100x5270x4800 mm Weight: 36400 kg more
6

Double Column VTL Vertical Turret Lathe JUNGENTHAL DKZ 20

D - Nordrhein-WestfalenGermany dealership location
6381 km
1968
used
Machine-No.: WM 8003 Maschine 140 face plate diameter: 2000 mm turning diameter: max. 2800 mm turning height, max.: 1500 mm Ssr9as 2 supports Digital display Heidenhain copying attachment more
6

Vertical turret lathes Schiess KE160 125A

Europa - NiederlandeNetherlands dealership location
6240 km
used
Make: Schiess Y283koi0 Type: KE 160 125A Max. swing: 1.800 mm Turningheight: 1.250 mm Table: 1.600 mm Motor: 30 kW Digital read out 4-Jaw Stock Number: draai521 more
2

Vertical Lathe Stanko 1532 T

DüsseldorfGermany dealership location
6395 km
1980
used
Manufacturer: Stanko type: 1532T BJ. 1980 condition: dismantled Pede9kqdw Rotation Ø / 3200 mm Drehoehe / 2000 mm Ø faceplate 2800 mm piston stroke 1250 mm Plunger swiveling '-15 ° / + 40 ° speed of 1/min. 0.66 62.1 Feed mm/min 0.059 470 power KW 63 H ges / 6000 mm weight: 90400 kg Lxwxh 5, 1 x 9, 3 x 7, 2 more
4

Vertical Boring Mill Rafamet KCF 200

Europa - BelgienNetherlands dealership location
6264 km
used
Faceplate (4-jaw) Dia. Ø 2.000 mm Max. Swing Ø 2.400 mm Max. Height 1.500 mm Max. Load 10 Ton R.P.M. 2 - 100 (18x) kW 45 Volt 380 Cycles 50 Wypagq2ky 2 Ram Heads, Vertical Travel: 1.000 mm more
2

Vertical turret lathe TITAN SC 50

D - Nordrhein-WestfalenGermany dealership location
6401 km
1987
used
Upgraded 2012 Faceplate diameter 4000 mm Workpiece diameter with vertical support 5000 mm Max. workpiece height 2200 mm Max. workpiece weight 18000 kg Max. travel of crossrail 1900 mm Right vertical support slide travel 840 mm Left vertical support slide travel 1160 mm Max. horizontal travel of right support 2750 mm Max. horizontal travel of left support 2600 mm Vertical supports max. angular setting +/-35° Faceplate speeds, stepless 1,02 – 92 rpm Gearbox feeds 16 Main DC motor 60 kW Motor for ... more
1

VTL SC 33

KarlsruheGermany dealership location
6598 km
1988
used
VTL - SC 33 3 300 mm Price ExWorks Romania​ 66 000,00 Euro ​Machine is in very good tehnical condition The lathe was manufactured in 1988 and put into operation in 1999. We not could to rotate the machine table as electric power plant is fueled now only 20 kw and for turning lathe table required min. 60 kw We tried manually turning the table and found that there are no problems. Lathe worked very little since made only repairing works. Guideways are in good condition how you see in pictures... more
6

Vertical Lathe SCHIESS KZ250

D - Baden-WürttembergSwitzerland dealership location
6691 km
1965
used
SPECIFICATIONS: Has been completely overhauled turning diameter 2700 mm turning height 2300 mm Faceplate diameter 2500 mm speed range from 0.35 to 121 U / min Max. Workpiece weight 15,000 kg Drive capacity 55 kW Machine's weight about 40 tons. The machine has a copy rotator on the left Qürbalkensupport. 9adcl more
6
faceplate diameter 2400 mm swing diameter 2600 mm turning height 1600 mm total power requirement 45 kW Moxaf weight of the machine ca. 54 t dimensions of the machine ca. 6.3 x 5.5 x 6.6 m Machine can be inspected Under power more
5
WORKING RANGE TURNING swing diameter (max) 6300 mm workpiece length (max) 2500 mm workpiece weight max. 40000 kg FACING PLATE (TURNING MACHINE) diameter of surface plate 3200 mm spindle revolutions (min) 0.8 /min spindle revolutions (max) 80 /min number of gears 2 continuous speed variation yes drive power (max) 80 kW torque (max.) 115 kNm CROSS BEAM w-axis traverse 2550 mm CROSS BEAM SLIDE z-axis traverse 1600 mm x-axis traverse 1900 mm COLUMN SLIDE z-axis tr... more
5
4-Jaw Faceplate Ø 2.500 mm Max. Swing Ø 2.700 mm Max. Height 1.500 mm R.P.M. 1,9 – 60 (16x) kW 38 Volts 380 Cycles 50 Including: 2 x Ram Heads on the Rail Wyz923j9u Ram Head Travel 1x Side Head more


Vertical t...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close