Used Vertical Head for sale (15,258)

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Special accessories: - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rsdpfx Asddtwbsb Ujr Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1989, Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Number: 1824/1989 Admission: SK 50 Stop surface W x H: 480 x 460 mm Rsdjh Ar Tyepfx Ab Uer Hole spacing W x H: 425 x 415 mm Gear wheel diameter inside / outside: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1.000 mm

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm Rodpfx Abed Dk A Ao Uor - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Rjdpfx Aeu Nlgyeb Ujr Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head *

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA (Origin Italy) boring mill. Spindle taper: SK 50 Overhang: 660 mm Flange dimensions: 465 x 440 mm Internal bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions (L x W x H): 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Continuously adjustable angle, manual Redpfoyc Nhhjx Ab Ujr • 4 fixed indexing points at 90° each with locating pins • Tool clamping with drawbar • Suitable for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, swivels left/right, manual tool clamping, ... Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Redpfx Ajxddwrob Uor Net weight: 61 kg Good condition

Condition: used, Double-sided drilling and mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Rjdev Tnihepfx Ab Uor

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 Rsdpfsu N E Absx Ab Uor - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Rsdsv U I Slepfx Ab Ujr Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm *

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Redpfx Ajxf Ur Nsb Uor

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Rjdpfowbi Rbex Ab Uer Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: ready for operation (used), Year of construction: 1979, VTL BERTHIEZ (France) TM 500 8P Rodex Dbydjpfx Ab Uer Model: TM500 8P Year of manufacture: 1979 Chuck diameter: 6,300 mm Max turning diameter: 15,000 mm Max workpiece height: 4,000 mm Ram travel: 3,600 mm Main motor power: 100 kW Max workpiece weight: 80 t Section of side tool post: 360x360 mm Side tool post travel: 2,500 mm Approx. machine weight: 230 tons Video available Milling and hobbing heads available

Condition: used, Year of construction: 1980, inner taper of milling spindel ja collet diameter ja Rsdpfxjw N S D Ej Ab Uor turning speed range 800 U/min Worm milling head for beetle 140 + 135 No. 4003 Type.140

Condition: used, Filling and weighing line: “Ishida” Multihead weigher Type CCW-EZ-214/30 Heads: 14 pieces max 50 programs (0-49) Performance: up to max 99 weighings/min Accuracy: average 0 to + 1.0 g Weighing volume: 50-3000 g Display: micro controller display Ambient temperature: 0°C - 40°C Humidity: 35-85% (no condensation) Smallest setting: 0.1g + Vertical flowpackaging line “Rovema” Type VPK260 - 14961 yoc 2005 Performance (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-unrolling) Bag width (min. - max.) (mm): 60-260 Bag length (min. - max.) (mm): 120-600 Fill volume (max.) (cm³): 6000 Sealing pressure (max.) (N): 5000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2.200 x 1.430 x 1.620 mm Weight: 920 kg Power supply (volts): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C): +5 … + 45 Rjdpfjytbyqox Ab Uor Storage temperature (min. – max.) (°C): -20 … +50 Air humidity (max.) (%): 15…95; no condensation in good condition

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Complete Ilapak packing line consisting of Ilapak multihued weigher mod WA 10/50 & Ilapak vertical bagging machine mod VT 2000 GF S whit a pipe diameter of 185 mm. Year of construction 2012 on both of the machines. Including cleaning platform for the scale hoppers. Redpfxjxl T Aye Ab Usr

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm Redsb N Ahlspfx Ab Uer quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output Rjdpfx Abeyug R Rs Uer • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Redpfeyug Hxex Ab Uer enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Rsdpfxopu A D Ae Ab Uer Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Rsdpjynfy Dofx Ab Uer Power supply: 380V The cycle is initiated by a foot pedal.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Redpjyr Numefx Ab Uor Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Rjdoyplqropfx Ab Uer Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: other, overall weight: 19,000 kg, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates Redpfx Aoyubhqob Uer – Hydraulic opening cap – Automatic lubrication system

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm Rjdpfx Absxc I Dgs Uor

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Rjdpfxjxv Apwo Ab Usr Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems