Deburring machine (wet operation)
Type: sheet metal deburring machines
Manufacturer: Timesavers Grindingmaster
Model: 41-Serie 600 WRDW
a) Sanding drum
b) Sanding disk
c) Sanding drum
d) Drying unit
Working range: Working width: 600 mm
ready for your test
Location: Central Germany
Availability: on demand
: 900width: 930length: 1900weight approx.: 5,5retainer diameter: mm 1220: m/sec 8-22aggregate for frequency control of speed: m/sec 10-22feed rate: m/sec 1-10: kW 11air requirements of grinding belt aggregate: l/min 70aggregate: kW 7,5feed motor frequency-controlled: kW 2,2electrical connection: Volt 400paper filter pump: 0,8 bar 200tank capacity: 450length paper filter unit: 200quality: micron 30 -50performance of dehydrator: kW 5,3compressed-air: bar 6
Type: Grinding Master GR-3200-900
Year of construction: 2002
working width: 900 mm
grinding belt dimension: 1900 x 930 mm
disc disc: 1220 mm
conveyor belt speed: 2 - 10 m/min. infinitely variable
400 V / 87 A / 50 Hz / 43 kW more
Measurements width 3200 mm
Measurements depth 2600 mm
Measurements height 2850 mm
Machine weight 15000 kg
Model SIMATIC MULTI PANEL
Outer length 12000 mm
Outer width 2600 mm
Main electronic connection 400 V
1x Table with tilting system for sheet turning
1x Table (6m) to place sheet to grinding machine
This TIMESAVERS 72-SERIE-2600-W Grinding Machine was manufactured in the Netherlands in 2010 and has an over... more
Rolling unit with contact roller 65° shore, manual adjustment, motor 7.5 kW,
Rolling unit with contact roller 45° shore, manual adjustment, motor 5 kW,
Mechanical variator 0,37 kW, 3-9 m/min., fixed table,
Pressure rollers front and rear, sprung
400 Volt, 50 Hz, 13.95 kW, 28.12 A, CE, main switch,
digital table height reading,
motorized table height adjustment 1-127mm more
Deburring machine for deburring and edge rounding on all sides of punch-laser water jet and flame-cut parts
Part thickness from 0.5 --100mm
Max part width 1350mm
Smallest parts 40x40mm
Machine with wide belt pre-sanding station for superior burr formation or surface finish
Rotary brush carousel for edge rounding
Wide belt regrinding station for surface finishes
Quick tool change for material mix steel and VA
Extremely long service life
100 % uniform result on all sides
Deburring and edge rounding machine for ver timesavers series 12-225 WRd. machine equipped with contact roller for upgrading with abrasive cloth and discus to scale by grinding and Verrundungspads. Machine also suitable for the application of finishes.
Disc grinding machine make TIMESAVERS type 41 series 900 WRD
Machine # 2322-01 Year of construction 2002
for deburring and finish grinding of metal products
Working width 900 mm
grinding belt dimension 1900 x 930 mm
Contact roller Drm. 180 mm
Processing speed 8 - 22 m/sec.
Disc 900 mm
Disc speed 10 - 22 m/sec
Drive power 11 / 7.5 , 11 / 2.2 kW
- CE Marking
- Wet execution
- pneumatic oscillation
- stepless feed
- motor-driven height-adjustment
- vacuum table
- Fee... more
- 1300 x 800 mm table size (all areas accessible by consumables)
- Position-able side guards
- 0-100 mm component thickness
- Variable motor 0.75kW speed 600-1500 rpm
- Tilt-able grinding head 0-180°
- Automatic abrasive belt oscillation and tracking
- Central vacuum area 310 x 260 mm
- Dust and chip tray
- External dust extraction connection 50 mm Ø
NB Please take note of ATEX and Aluminium Grinding regulations if applicable. Ellesco can advise and supply suitable dust extraction and col... more
Manual deburring and edge processing rounding machine manual Grinder by timesavers. Change various sanding pads and brushes. Can be used to knock off plasma slag. Vacuum table to process secure hold of the parts to be processed.
In stock, suitable for deburring of vertical slag and burrs, edge breaking all directions and hole size, and graining of sheet and components:
900 mm working width (max)
1-125mm material thickness (thinner with care)
Digital readout with “dial-in” thickness setting
Variable throughfeed conveyor speed 2.5-14m/min
Single abrasive belt
5/15 kW Two speed abrasive head main motor
Automatic abrasive belt oscillation and tracking
5 kW Large diameter disc head (to take nylon web pad, interleaved ... more
Slag Grinding machine with 2 sanding belt units and an oscillating wire brush. The system is optimally suited for the processing of flame cutting / plasma parts. The machine was little used and is in very good condition
1. Station sanding belt unit, roll diameter 180 mm, 90 ° Shore, for rough burr removal
2. Station sanding belt unit, roll diameter 280 mm, flexible 45 ° Shore, for the surface machining and edge rounding
3. Station, wire brush roller oscillating with 280 mm diameter, c... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.