Used Sheet Metal Shelves for sale (37,670)

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Ijdewz Ukyopfx Ab Tstc Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B8820, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), overall weight: 9,800 kg, TECHNICAL DETAILS Sheet thickness max.: 8 mm Working width max.: 3,100 mm Back gauge depth: 1,000 mm MACHINE DETAILS Control: CNC Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Weight: 9,800 kg Transport packages: 1 Iodpfx Abeyh Nl Ie Tjtc EQUIPMENT Electric backgauge Pneumatic sheet support system Fixed finger guard Motorized angle adjustment Motorized cutting gap adjustment Ball bearing table Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg Isdpfoygw Ikox Ab Tjtc EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 20021, working width: 2,100 mm, bending angle (max.): 150 °, sheet thickness (max.): 3 mm, distance between stands: 2,450 mm, opening stroke: 160 mm, TECHNICAL DETAILS Sheet width: 2,100 mm Sheet thickness: 3.0 mm Frame width: 2,450 mm Opening width: 160 mm Max bending angle: 150° Backgauge - adjustable: 6.0 - 1,000 mm Control: CNC Ijdpfsygw Haox Ab Tstc MACHINE DETAILS Total power requirement: 5.37 kW Dimensions: 3,250 x 2,450 x 2,100 mm Machine weight: approx. 3,850 kg EQUIPMENT - ERBEND 15.6" CNC control panel - Electric backgauge from 6.0 - 1,000 mm - Material support table with ball rollers - Servo motor drive - LED machine lighting - 1x 30 upper tool - radius 1.0 mm - 1x bending rail 15 mm - 1x bending rail 25 mm - Electric safety device at the front (light curtains) - Mobile foot control - Operating manual - CE declaration SPECIAL ACCESSORIES - Divided Geifu upper tool, height = 90 mm - CNC electric motorized adjustment of lower beam - Manual crowning of the bending beam

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine on time between 23/03/2026 and 27/03/2026! TECHNICAL DETAILS Maximum tensile strength, stainless steel: 600 N/mm² Itodpfjycqucjx Ab Tec Stainless steel sheet thickness: 0.5 mm – 1.25 mm Typical sheet thickness, stainless steel: 1.0 mm Maximum tensile strength, steel: 410 N/mm² Steel sheet thickness: 0.5 mm – 2.0 mm Typical sheet thickness, steel: 1.5 mm Maximum tensile strength, aluminum: 265 N/mm² Aluminum sheet thickness: 0.5 mm – 3.0 mm Typical sheet thickness, aluminum: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic system Oil capacity, main machine: approx. 500 l Oil capacity, scissor lift table: approx. 20 l Cooling system (closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Supply connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Main fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply: 220 V AC Open cooling system Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & weight Space requirement (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: likely up to 3,000 mm Total weight (without oil filling): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot converted with magnetic gripper SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Kingsland Multi 70 Hydraulic Steelworker Year: 2002 Punching Capacity: 26 x 20 Shearing Flat Bar Max. Thickness: 300 x 20 Flat Bar max. width: 325 x 15 Iodpfxeyk Thbj Ab Tetc Angle Cutting 90 degrees: 130 x 13 Section Cutting Round / Square: 45mm Notching: Material Thickness: 10mm Machine with: Selection of tooling / punches

Condition: used, Guillotine shear LOTZE Type HSS 20 / 7 Cutting length 2050 mm Cutting thickness 7 mm Itjdpfxelmry Ej Ab Tec with simple back gauge

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm Itedsif Sg Sopfx Ab Tec - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch Itodpfx Aeifu Ansb Tsc - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Itedpslpkcnjfx Ab Tjc Cutting thickness at 450 N/mm²: 3 mm Simple backgauge: 500 mm Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition

Condition: good (used), Hydraulic tank cap, tank cap Itsdpfsykz Rkex Ab Tsc -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Condition: ready for operation (used), Year of construction: 2015, Used Timesavers Deburring Machine 42-Series-1350-WRB Technical Specifications: Year of manufacture: 2015 Condition: refurbished (2026) The machine is under power and can be inspected by appointment! Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1380 x 1900 mm Antistatic device Maximum weight: 100 kg Electrical connections: 400 V Frequency: 50 Hz 1st Unit: Contact roller Ø 180 mm Contact roller 55° Shore NI, grooved Pneumatic oscillation Fine adjustment by raising/lowering the contact roller Dial gauge Main motor 15 kW Processing speed: 11 m/s, in feed direction 2nd Unit: Rotary brush unit 8 brushes Ø 350 mm Ijdpeyk U Szjfx Ab Tjtc Motorized height adjustment with tip switch Drive motors: 5x 1.5 kW Rotational speed of the unit, frequency controlled Processing speed: 6 – 17 m/s 3rd Unit: Wall-mounted parts cleaning brush Feed: Fixed vacuum table Feed belt, flat and perforated, oil- and heat-resistant, flame-retardant Feed motor 2.6 kW, frequency controlled, 0.6 – 8 m/min Tip switch for forward/reverse feed belt Motorized height adjustment of table 0.18 kW, 0 – 100 mm, digital display Pressure rollers: Spring-loaded pressure rollers Ø 50 mm, with limit switch at the front Vacuum pump 15 kW Machine built to CE standards Main switch, operating hours counter Sound pressure level: ± 80 dB Machine weight: 6,200 kg Extraction and/or installation service can be offered on request!

Condition: good (used), Year of construction: 2017, Used deburring machine from Costa Deburring, small radius grinding and finishing in a single pass – both top and bottom! Type: MB4 CV+CV 1350 Itedpfx Aboyillgs Tjc Grinding width: 1350 mm 4 units for top and bottom in one pass Includes spare parts Year of manufacture: 2017 Hakon wet filter system

Condition: good (used), functionality: fully functional, Year of construction: 2001, Motorized Swivel Bending Machine Make: SCHRÖDER, Model: MAK3 2500/4.0 Year: 2001 Technical Data Manufacturer: Schröder Model: MAK 3 Year of manufacture: 2001 Working length: 2500 mm Capacity (at 400 N/mm²): 4.0 mm Upper beam stroke: 300 mm Dimensions: approx. L 3.85 x W 2.3 x H 1.8 m Weight: 3,720 kg Equipment • Programmed backgauge 10-1000 mm • Motorized bending beam adjustment • CNC control POS 2000 • Hydraulic tool clamping • Foot switch • Tools: - Sharp rail 45° - Bending rail 22 mm Itedpfx Asyiax Ujb Toc - Bending rail 10 mm (adapter missing) - Gooseneck die H 130 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m². Itedpfxovn Al Tj Ab Toc

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping Iodpfx Absyhdz Tj Tetc CNC backgauge with 4 finger types (standard, clamping, side clamping) Additional lower blade

Condition: excellent (used), functionality: fully functional, Industrial high-performance sheet pan cleaning machine Jeros Model: 9029TS with 9020 Capacity: 800–1000 trays/hour With oiling system / for external oil container Touchscreen control for automatic tray cleaning Premium stainless steel construction Connection: 400V, 16A CEE plug Used device, cleaned Options: Maintenance contract Service package Delivery service Training / commissioning Visit our extensive machine warehouse! Iodpfjxwtnyjx Ab Tetc

Condition: used, Max. bending capacity ST 37: At length 500 mm: 1.0 mm At length 300 mm: 1.5 mm Ijdpfjyinibox Ab Tetc At length 200 mm: 2.0 mm Dimensions, approx.: 1060 x 740 x 1130 mm Weight incl. accessories, approx.: 320 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: CYBELEC, controller model: CYBTOUCH 15 2D, working width: 3,100 mm, throat depth: 450 mm, number of axes: 4, type of crowning: CNC-controlled, overall weight: 7,600 kg, total length: 4,360 mm, total width: 2,760 mm, total height: 1,745 mm, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Hydraulic Press Brake / HYBRID COMFORT PLUS 135T 3m: Pressing force: 135T Bending length: 3,100 mm Distance between uprights: 2,600 mm Stroke: 265 mm Throat depth: 450 mm Maximum opening: 470 mm Ram height: 925 mm Descent speed: 190 mm/s Return speed: 140 mm/s Working speed: 10 m/s Machine dimensions: 4,360 x 1,745 x 2,760 mm Weight: 7,600 kg Motor power: 11 kW Standard features: 4-axis (Y1, Y2, X, R) motorized backgauge for precise and fast positioning Cybelec CYBTTOUCH 15 2D CNC controller Monoblock welded steel frame ensures rigidity and durability Promecam quick-release tool clamping system for tool changes without downtime High-precision linear guides for consistently accurate bending FIESSLER AKAS front and rear laser safety system for safe operation Integrated standard tooling: 85° punch and Multi-V die along the full length LED lighting for optimal visual comfort Premium European hydraulic components by Höerbiger Motorized crowning for consistent bending across the entire length Two front sheet supports included Itjdpfx Aoxukbrsb Tec Available options: High-precision hydraulic crowning Pneumatic or hydraulic tool clamping systems (compatible with your existing tooling) Motorized bending aids for easy handling of long or heavy parts Extended rear backgauge for oversized workpieces Rear backgauge with up to 6 or 8 axes for increased flexibility Wide lower table suitable for multi-V tooling Additional fingers for rear backgauge Offline programming interface for job preparation from a PC Full robotic automation for bending processes to maximize productivity Machine manufactured in Turkey. The machine can be viewed and tested by appointment at our facility in Bréal-sous-Montfort (35). We can also provide demonstration videos or organize a live video presentation to show the machine in operation. Feel free to contact us for any additional information. Price on request. Delivery, unloading, and commissioning available on request.

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Main switch, emergency stops Disc brake Electrical specifications: Power: 28.05 kW Iedpfx Abexc H Rfo Tjtc Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Condition: good (used), functionality: fully functional, Year of construction: 2010, Motorized Folding Machine Manufacturer: SCHRÖDER Model: MAK2 2500x3.0 Year: 2010 Technical Data Manufacturer: SCHRÖDER Model: MAK2 2500 x 3.0 Year of manufacture: 2010 Working length: 2520 mm Sheet thickness: 3.0 mm Stroke: 250 mm Drive power: 3.0 kW Dimensions: L 3.70 x W 2.25 x H 1.55 m Iodpfeygh Izjx Ab Tstc Weight: 3.5 t Features • Back gauge 1000 mm • POS 400 control • Sharp rail 30° • Bending rail 25 mm, 10 mm • Gooseneck rail H 90 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 803, Offer 26019 Hydraulic Universal Two-Station Sheet Metal Notching Machine + Bending Station Technical Data: Itodjyli Utjpfx Ab Tec Station 1: - Cutting length up to: 225 mm - Cutting thickness: - Steel with 400 N/mm² strength: 8 mm - Stainless steel with 600 N/mm² strength: 6 mm - Cutting angle: 90° - Stroke: up to 25 mm - Strokes per minute: 50 1/min - Table support area with T-slots and depth stops: 320 x 800 mm - Table height: approx. 900 mm Station 2: - Bending or pressing station, pressing force: 12.5 t - Throat depth: 150 mm - Stroke approx.: up to 25 mm - Drive: 400 V / 4 kW - Electric foot switch - Required floor space approx.: W 1000 x H 1250 x D 1200 mm - Weight approx.: 1550 kg

Condition: ready for operation (used), Year of construction: 1985, control type: manual, working width: 4,080 mm, sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), overall weight: 16,500 kg, total length: 5,300 mm, total width: 2,500 mm, total height: 2,300 mm, Cutting length 4080 mm, cutting capacity 10 mm, motor 22 KW, working high 800 mm, back gauge 1000 mm motorised, cutting line, footpedal, 4 frontarms, maschine can be lower down by 200 mm, dimension 5300x2500x2300 mm, ca. 16000 kgs Iedpfx Abohl Im Ne Tjtc

Condition: excellent (used), Year of construction: 2026, Timesavers Series 10 Manuel Ginder The machine is a demonstration machine which was used occasionally for demonstrations. Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Itsdpfx Aofhb N Ssb Toc Speed infinitely variable. The machine is in our warehouse and can be viewed at any time under power, tested and accepted.

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm Itjdpfx Abscka N Uj Toc STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.