Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Psdpexuu Dkefx Admord Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor!

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min :Electric sheet thickness adjustment :Electric tool positioning Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Prsdpoxy Dmfjfx Admed Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Condition: excellent (used), Year of construction: 2018, operating hours: 1,950 h, Model: Timesavers Grindingmaster 81-Series-2100-W Year: 2018 Operating Hours: 1,950 h Configuration: High-performance wide belt grinding with fixed table and Siemens control. Capacity & Working Dimensions Min. Dimensions (LxWxH): 600 x 600 x 10 mm. Max. Dimensions (LxWxH): 1680 x 1830 x 30 mm. Max. Workpiece Weight: 250 kg. Machine Opening: 1 - 100 mm. Psdoxxznkspfx Admerd Grinding Unit (Head 1) Contact Roller: Ø 280 mm, 70° Shore Ni 37 45. Main Motor: 90 kW. Belt Speed: 8 - 22 m/sec (frequency controlled). Rotation: 2 directions. Belt Dimensions: Length 2620 mm x Width 2130 mm. Oscillation: Electronic, adjustable (2130, 1600, or 1380 mm).

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 2300 kg Measurements height 2240 mm Dimensions Machine Length 2070 mm Technical Specification Working Width 1300 mm This Fladder 300 Gyro was manufactured in 2000. It features a working width of 1300 mm, six brush heads, and a rotating and oscillating sanding unit. Equipped with two vacuum fans and a vacuum conveyor belt, it ensures efficient material handling. The motor power is 7.5 kW, and it offers an infinitely variable feed speed of 2 - 8 m/min. Contact us for more information about this machine. Application Types Psdpfxjxy Thfj Admsrd Other Sheet Metal Machinery

Condition: used, Year of construction: 2020, Opportunity to purchase this LISSMAC deburring machine (Y2020) with working width of max. 1500 mm and sheet metal thickness from 0,5 mm to 50 mm. Psdpfxoxxykqo Admsrd This machine is in very good condition with 2900 working hours and it can be inspected under power upon appointment. Additional equipment: o dry vacuum unit o 2 x 2000 m conveyor belts Availability: 11/2025 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Max. thickness: 0.5 - 50.0 mm Operating voltage: 400 V 50 Hz Max. width: 1500 mm Speed: 0-4 m/min Rated current: 82 A Rated power: 44.5 kW Operating hours: 2900 Weight: 4200 kg Machine dimensions (LxWxH): 3600 x 2100 x 2000 mm

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Predpexwnbujfx Admjd Price: On request Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Control: CNC - Motor power: 39.0kW - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2015, condition: used, max. dia. of grinding wheel 150 mm turning speeds 2850 U/min total power requirement 0,45 kW dimensions 465 x 316 x 302 mm weight 10,7 kg NEW PRICE: ~ 200.00 EURO Description - Double grinding machines from OPTIMUM - a quality product for trade and Pedpfx Adswp S U Esmjrd industry - Heavy-duty, durable industrial design with maintenance-free motor for continuous use - Extruded aluminum housing - Long service life and smooth running thanks to balanced rotor with high-quality ball bearings - Spark guard on each grinding wheel reduces flying sparks - Stable, adjustable workpiece support - Viewing windows made of shatterproof material - Vibration-damping rubber feet - Two universal corundum grinding wheels

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Passage width: 1500 mm Sheet thickness: 0.5–50 mm Load capacity: 300 kg/m Infinitely variable feed: 0–4 m/min Control: NC Total power requirement: 33 kW Machine weight approx.: 4,200 kg Space requirements approx.: 3600x2100x2000 mm Prsdjxwuhzepfx Admjd Accessories: - Lissmac extraction system

Year of construction: 1998, condition: used, machine/vehicle number: RM48/3189, Item number: MA977 Manufacturer: RAS Type: Rasamax ST Duo Prjdpfscwyifox Admed Year of manufacture: 1987 Machine-No.: ST-Duo 1055 Length [mm]: 650 width [mm]: 600 height [mm]: 1200 weight [kg]: 190 Connected load: 380V / 1,4KW Number of tool stations [pcs.]: 2 Gear [rpm]: 1500 / 3000 accessories: base cabinet / roller conveyor / spare grinding wheel

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Brush Deburring Machine RE 500 Brush diameter: 250 mm Predpfoxzrd Uox Admsd Revolutions: 1500/3000 rpm Operating manual

Condition: excellent (used), functionality: fully functional, Brush deburring from all sides using a rotating and simultaneously revolving stainless steel brush Prjdoxyqniopfx Admsd

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Prodot Dpxbopfx Admod Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm Prjdpfxsuia Dqj Admed on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: used, Year of construction: 1986, working width 50 mm wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min Prsdpfx Adovn Al Tomed total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. Podpfstzfntjx Admord This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Pedpfx Aded Hintomerd Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Condition: good (used), functionality: fully functional, automatic pipe end deburring in continuous process --- Pipe length max. 600 mm Max. pipe diameter 30 mm Prjdsxx U Tyepfx Admod Brush length approx. 450 mm Brush revolutions 2000 rpm 2 brush drive motors, 5.5 kW each

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Predpfx Adjw R E Hpjmsd Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Year of construction: 1989, condition: excellent (used), Stock number: 2939 Manufacturer: Held Year of manufacture: 1989 Machine number: 3356 Type / Model: E90 Stop surfaces: 800 x 50 mm Speed: 8,400 rpm Pjdpeu Un N Esfx Admsrd Connection: 1.1 kW Accessories/equipment: Condition: good Weight: approx. 0.1 t Footprint: 550 x 500 mm Dimensions: 1,000 x 500 x 1,000 mm

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Connected load: 2.4 / 3.7 kW Space requirement: approx. 1.0 x 0.5 x 1.2 m (L x W x H) Pedpfxsxr A A Ne Admsrd

Condition: not inspected (used), 41 Series WRD untested, available at a low price. Podexwbb Uspfx Admerd

Condition: ready for operation (used), Year of construction: 2017, Magnetic chuck / magnetic holder, tiltable magnet (swivel type), used e.g. for setting the angle of a workpiece. Manufacturer: SAV Spannsysteme No. 245.01-25.5 Applications: - Surface grinding machines - Milling machines - Measurement and quality control Pjdovkyr Ajpfx Admjrd - Assembly / welding operations

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Prsdpfx Adoxxbm Hemed

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System. Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation. Prsdpfxoi E Tkas Admjd

Condition: new, Year of construction: 2025, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm. Minimum Part Dimensions: 50 × 50 mm. Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Prodpfx Adjui Ih Romod Machine Weight: 3.000 kg