Used Brush deburring machines for sale (26)

Condition: good (used), Year of construction: 1967, max. wheel diameter 300 mm gear width 300 mm max. wheel diameter 400 mm max. module 1-20 workpiece turning speeds 0 - 6 U/min min. module 1-10 total power requirement 0,5 kW weight of the machine ca. 0,45 t Ufo7Qfguqr

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option Dpde2B (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Condition: like new (used), Year of construction: 2019, Operating hours: 3,500 h, Functionality: fully functional, CNC PROGRAMMING AND AUTOCOMPENSATION OF MEASUREMENT Uhxedxgxh2 DOUBLE BRUSH HEAD WITH FIVE BRUSHES EACH ONE BELT SYSTEM TO TURN THE PIECE AROUND THE MACHINE DEMAGNETIZER INCLUDED IN THE WORKPIECE EXIT AIR PURIFICATION EQUIPMENT FILTRATION EQUIPMENT WITH MAGNET SPARE BELTS AND BRUSHES

Condition: excellent (used), Year of construction: 2019, Operating hours: 827 h, Type of input current: three-phase, Start-up year 2022 Grinding width 1,350 mm for deburring, edge rounding for stainless steel & aluminum, (black-steel-ordinary steel can be processed) Stand design with transport bed: - with continuous conveyor belt, silicone-free, feed speed 0.5 - 5 m/min - with adjustable frequency, fixed working height of 950 mm (+/- 20 mm), - equipped with conveyor belt cleaning system - upper part of the machine regulated by the motor depending on the thickness of the workpiece - (1-160 mm), complete with integrated control cabinets. Suction system for clamping workpieces - For safe transport of workpieces up to 500 mm in length - in the feed direction together with a built-in 4.0 kW fan. Industrial computer 15.6" - TFT color LCD display - Windows Embedded Standard operating system - Touchscreen version - With display of production and downtime times - Can be connected to an Ethernet network. Grinding unit for microgrit removal and longitudinal grinding with rubberized contact roller - hardness of about 60° Shore - Diameter: 250 mm - Grinding belt dimensions: 2,620 x 1,400 mm - Belt speed: 1.7 - 28 m/s - Drive power: 22 kW - Rotary peripheral unit with RUT disc brushes - Collective drive for 18 disc brushes, inverter 22 kW, - Central height adjustment system according to the degree of wear of abrasives, Dpmdsb - Including quick-change device for disc brushes, - Brush design: ZIRKON K80 professional double-row brush Diameter: 180 mm - Speed: 5 - 25 m/min, inverter 2.2 kW

Condition: as good as new (ex-display), Year of construction: 2024, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate Do0Ozh suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: as good as new (ex-display), Year of construction: 2021, Operating hours: 22 h, Functionality: fully functional, Brushing unit diameter: 350 mm, Working width: 1,350 mm, Overall weight: 6,200 kg, For sale a new Timesavers machine manufactured in 2021. It has not been used. It has a total of 22 hours of operation. Can also be used for aluminium grinding and deburring. Can be taken away immediately. The multi-directional ROTARY ABRASIVE BRUSH (RB) grinder has a working width of 1350 mm, a sheet metal products from all directions in a single pass and to remove the cutting edges of metal products in a single pass. Ca8Xloquag rounding of cutting edges. Pressure roller: 180 mm diameter working roller, ± 55º Shore hardness, vulcanised, with oil and heat resistant rubber coating. Special with special profile grooves. Its function is to cleaning of the product surface and primary deburring of the edges. - Fine adjustment of the head height with an accuracy of ± 0,01 mm on the to control the grinding pressure and the thickness of the abrasive belt with hour meter display. - External support: quick-release fixing with M20 screw for quick change of abrasive belts and rigid fixing for the workstation. - Abrasive belt tensioning: compressed air operated, Compressed air-assisted, activated by a toggle switch. The tension is automatically adjusted by compressed air, using a simple switch. automatically compensates for belt elongation. The belt tension is automatically adjusted by the belt tension. - Abrasive belt guide: Pneumatic diaphragm system automatically holds the fast rotating abrasive belt on the head. This This increases the life of the belt. - Belt deflection compensation: rotating roller lifting function for the corrects misalignment of the abrasive belt Multi-directional (rotary brushing equipment) with 8 brushes equipped with 8 axes. Four brushes move in a clockwise direction and four heads counter-clockwise. - Frequency controlled motor drive with digital display - Motorised rotary head - Motorised height adjustment to compensate for wear - Screw quick-clamp locks for quick brush replacement Operation - Easy operation with push buttons, on/off status indication by light. - Load indicator for percentage indication of motor load status, abrasive stations and available power corresponding available. - Digital table height display in mm - Quick joystick movement for table height according to thickness for easy and quick adjustment of the height of the table height, as well as for starting and stopping the conveyor belt and stop Standard design - Massive machine frame: made of steel plate, ribbed to reduce vibration and vibration and deflection. - Mounting doors on both sides of the machine for easy maintenance and for easy and quick sanding belt replacement. - Dust extraction channels in the work area and on the sanding belts for cleaner, better and more continuous work - Disc or electric brake, stops the sanding belts when the limit switch is tripped or if the emergency stop is activated - Hour meter, measures operating time for maintenance traceability. CE certification and safety - Protective cover - Emergency stop button - Wing doors and door protection on both sides of the workpiece for easier access to the materials to be worked on - Finger protection on inlet side

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series Dpexr2 - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Year of construction: 2024, Condition: new, High-performance deburring machine for internal and external deburring of profiles and tubes in one operation (approx. 3 sec.) Powerful industrial gear three-phase motor, frequency-controlled, for stepless adjustment of the required speed: 600 - 2,700 1/min, for deburring tubes and profiles with material dimensions horizontal/vertical 120 mm, easily adjustable working table height (adjustable and lockable) for the corresponding material size adjustable, lockable feed (slide) of the deburring brushes to the working table by means of handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external exhaust system. Housing hoods hinged for changing the brushes. Bcmdm9Qobzw Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjusting screw. 3 deburring round brushes 250 x 60 / 0,35 mm steel wire crimped. Connection cable with CEE plug. Incl. operating tool. 12 months warranty for single shift operation Working height: 1050 mm Speed: 600 - 2700 1/min Weight: 410 kg Machine dimension: 680 x 1200 x 1380 Power: 3 kW Electrical connection (V/Hz) 400/50 Brush diameter: 250 mm Brush width normal: 60 mm. Immediately available from stock.

Condition: good (used), Year of construction: 1991, Machine/vehicle number: BG III 36-2155, Lg.no. 29879 Technical data: - Brush diameter 250 mm - Brush width 60 mm 73C3Djaj8A - Disc speed 1500 / 3000 rpm - Drive 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Height-adjustable support table with V indentations - Working height 900 mm - Space requirement approx. W 750 x H 1150 x D 500 mm - Weight approx. 200 kg - Separate dust extraction - 400 V drive - Space requirement approx. W 650 x H 1100 x D 650 mm - Weight approx. 50 kg

Condition: used, Year of construction: 1985, Machine/vehicle number: BIII 40-7133, diameter:250 mm work piece width: 60 mm speeds::1500/3000 total power requirement:2/3 kW weight of the machine ca.:85 kg dimensions of the machine ca.:550 x 650 x 1200 mm Leut3Tm

Condition: as good as new (ex-display), Year of construction: 2024, Machine/vehicle number: 2464-47, Serial number: Year of manufacture: 2024 Rolling unit with contact roller 65° Shore, manual adjustment, motor 7.5kW Brush 5.5kW with and in counter rotation, Mechanical variator 0.74kW, 1.5 - 9 m/min. Fixed table Bpujpb90 Spring-loaded pressure rollers front and rear 400 Volt, 50 Hz, 14.11 kW, 29.8 A CE, main switch Digital table height reading Motorized table height adjustment 1 - 125 mm

Year of construction: 1997, Condition: used, Brush deburring machine RSA RASAMAX MONO Ueh9Qwzx for brushes Ø 250 mm and approx. brush width 80 mm speed range 1500 / 3000 rpm operating voltage 380 volt total power requirement 2,0 / 3,0 kW Weight approx. 180 kg for deburring of sheet metal with contours for material thickness from approx. 1,0mm to 6,0mm. Brush speed 2-stage 1500 or 3000 rpm Machine is located in 71334 Waiblingen-Beinstein and can of course be inspected, please contact us.

Condition: used, Brushing machine / brush deburrer Dvrxjy - make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg - brush size Ø 300 x Ø 50x50mm type K 180 - engine speed 2920 rpm, suction nozzle Ø 180mm - with blow-off device Accessories: approx. 15 spare brushes NEW

Year of construction: 2014, Operating hours: 30,000 h, Condition: good (used), For sale: Biv2H9Qoyyz 1 piece used deburring machine / grinding machine Manufacturer: Peter Wolters Type: BD300-L YEAR OF MANUFACTURE: 2014 Operating hours: 2014 min. Workpiece width: 10mm max. workpiece width: 270mm Siemens PLC control Incl. extensive accessories: various brushes, grinding wheels, 2 x conveyor belt, toothed flat belt, 2 protective wheels For further technical data see pictures. Machine can be inspected at our warehouse in 09599 Freiberg. Price on request.

Condition: new, Year of construction: 2023, Operating hours: 2 h, Functionality: fully functional, Type of input current: three-phase, Total width: 13,000 mm, The 10 series is Timesavers’ versatile starter model and the cost saving alternative for manual deburring, edge rounding and finishing of metal. B9Lbf98Vf

Year of construction: 2010, Condition: good (used), Functionality: fully functional, Machine/vehicle number: 100577, TECHNICAL DETAILS grinding diameter A: 457,2 mm grinding diameter I: 254 mm wheel thickness: approx. 63 mm speed: max. 1200 rpm belt speed: 0 - 5,1 m/min Compressed air: 5,5 bar air consumption: 200 l/min Djjdtt Sound pressure level: 70 dB(A) Control system: S7-300 workpiece size L x W x H: max. 1.000 x 150 x 150 mm machine weight: approx. 3.350 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Used machine Year of construction: 2021 Sanding width: 1350mm Working height: 880mm Maximum workpiece thickness: 1 - 100mm Sanding belt speed: 1.8 - 18 m/s Motor power: 1 x 15 kW Sanding belt dimensions: 2620 x 1400mm (up to 40mm narrower sanding belts can be used) Roller diameter: ø350mm Number of rollers: 6 Feed speed: 02 - 4 m/min. Active power: approx. 36kW Connected load: approx. 66kVA Hfnfir8Jj Rated current: approx. 96A Total weight: approx. 4600kg Required air speed for dust extraction: 23 m/s Available from July 2024

Year of construction: 1976, Condition: not inspected (used), WKG 718 Offered here is a brush deburring machine from the company Höckh. Technical data: Manufacturer: Höckh Type: o.A Year of manufacture: 1976 4 brush units: Grinding brushes rotary indexing tableØ: 800mm with 90° pitch clamping device: hydraulic B2Hexo2Tz8 grinding brushesØ: 250mm grinding brush length: 2x 300mm and 2x 450mm workpiece height: approx. 600mm feed path of the units: 600mm Remark: closed cabin Application: deburring of milled surfaces on housings or similar workpieces made of aluminum, die-cast aluminum, etc.

Condition: good (used), Min. Pipe length: 100-1800 mm The system was previously used for deburring cut pipes! Rr9Fcqsc

Condition: new, Year of construction: 2024, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Btomyk2E Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Year of construction: 2005, Condition: excellent (used), For sale is a Lissmac SBM-B 1000 in very good condition. Ckzogo92 In addition, reserve brush belts are included in the price. Operating voltage: 400 V Motor power: 4x4,8 kW weight: 1550 kg Power consumption: 63 A passage width: 1000 mm sheet thickness: 1-20mm Sheet size min.: length in throughput direction: 150 mm width in throughput direction: 100 mm Speed: 1400 rpm

Year of construction: 2024, Condition: as good as new (ex-display), Machine/vehicle number: 2626-50, New machine / demonstration machine Year of manufacture: 2024 Serial number: 2626-50 Bzawmru9Fu Technical specifications Max. Working width: 1100 mm Sanding belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0 - 100 mm Sanding speed 1st unit, frequency-controlled: 5 - 15 m/sec 2nd unit, frequency-controlled: 6 - 17 m/sec Feed speed, frequency-controlled: 0.2 - 8 m/min. Electricity Main motor 1st unit - W: 7.5 kW Main motor 2nd unit - RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit - W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connections: 400 Volt Frequency: 50 Hz Control current: 24 V Required air pressure: 6 bar Air requirement: 45 l/min. Dust extraction per unit Required output on 100 mm WS: 6,100 m3/h Machine weight: 3,750 kg Accessories / special equipment Attachment table: approx. 400mm with 2 castors Display motorized adjustment RB unit with 0-position Extra lighting on sanding belt units Feed carpet Cleaning brush

Year of construction: 2017, Condition: excellent (used), Used machine Year of manufacture: 2017 Good condition Including Ulmatec wet suction unit NAS 7800-3 / 11MD Year of construction: 2017 Power: 11kW Fq9Brqr General specifications: Max. Working width of sanding belt unit: 1350 mm Sanding belt dimensions (WxL): 1380 x 1900 mm Outer brush diameter: 350 mm Table opening: 0 - 100 mm Min. part size: 50 x 50 mm Sanding speed Feed speed, frequency-controlled: 0.5 - 8 m/min. Electricity 1st unit - W - sanding belt : 11 kW 2nd unit - RB - rotary brushing unit: 1.5 kW Brushes: 4x 1.5 kW (6 kW) 3rd unit - W - sanding belt: 11 kW Feed motor, frequency-controlled: 2.6 kW Vacuum pump: 15 kW Electrical connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min. Dust extraction to 100 mm WS Sanding belt unit: 2000 m3/h Vacuum pump: 1500 m3/h Sanding belt unit: 2000 m3/h Weight: 6500 kg Price ex site, without transportation Available from July 2023

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Machine/vehicle number: 1503, Year of construction: 2007 Working width: 1000mm With vacuum carpet Cvmsomati0 Immediately available

Year of construction: 2023, Condition: as good as new (ex-display), Machine/vehicle number: 2607-50, This multidirectional rotary brushing machine (RB) with a working width of 600 mm deburrs and finishes flat parts and parts with embossing from all directions in one pass, while improving the surface of the part with a non-directional surface finish. This dry finishing machine has 4 flap grinding brushes that rotate clockwise and counterclockwise. In addition to the rotating brushes, this machine is also equipped with an abrasive belt unit (W), one for pre-sanding which removes the primary burrs and the second for finishing the surface. Technical data: Max. working width: 600 mm Sanding belt dimensions: 1900x630 mm Brush dimensions: 300x300 mm Table opening: 0,8 - 100 mm Min. workpiece dimensions for vacuum: 50x50 mm Sanding belt frequency controlled: 5 - 15 m/sec Brush speed frequency controlled: 6 - 17 m/sec Feed speed frequency controlled: 0,5 - 8 m/min Main motor 1st aggregate W, frequency controlled: 4 kW Main motor 2nd aggregate Rb, frequency controlled: 1,5 kW Main motor 3rd aggregate W, frequency controlled: 4kW Motor carousel: 0,37 kW Vacuum pump, frequency controlled: 4 kW Conveyor motor, frequency controlled: 0,55 kW Motor table adjustment and brush unit adjustment: 0,18 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Total power (without options): 12 kW / 32 A Required air pressure: 6 bar Total air consumption: 20 l/min Required extraction capacity with 100 mm WS: 1750 m3 Bzawvpyh8S