Used Edge Deburring Machine for sale (65,866)

Condition: used, functionality: fully functional, Deburring machine, edge milling machine Reishauer KE 3786 Itsdpfxjz Rwkks Ap Den - Support table 250x250 mm - Motor UE 80/40 - Speeds 12,000 / 17,000 / 20,000 rpm - Milling cutter shank Ø6 mm - 9 milling cutters, including 4 with thrust bearings - Swiss made

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Iodpfx Apezy E D So Dstn Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Isdevm Efaspfx Ap Detn

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories Ijdsy Sp Hdjpfx Ap Dotn - 2 x dust extractor - 2 x conveyor belt

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Ijdpfezwt Rbsx Ap Dotn

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Full line has less than 2000 working hours Very good condition Itsdezwlnrjpfx Ap Den Available for inspection

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Itjdpfozw Et Ijx Ap Don Model : CB 18 . Series : B20 .

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine 20-800mm workpiece diameter Itjdpfjz Stwvox Ap Don 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility 4 number of grinding spindles 26,000rpm grinding spindle speed

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Iedpfx Aox S Dxbop Dstn Height: mm Machine weight: kg Standard configuration Extended machine accessories

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Itedpfx Ajz Rk E Uep Djn Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Itodpfx Apsygx A Nj Don Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elements Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Extended machine accessories Optional feeding mode:1. Feeding with strong permanent magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm)2. Feeding with vacuum negative pressure adsorption transport (suitable for stainless steel plates, copper plates, aluminum plates, etc.) that cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Itjdjygx A Aspfx Ap Djn machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 89 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Machine with wet vacuum cleaner Extended machine accessories

Condition: excellent (used), Year of construction: 1988, Ref:11163 . 1988 Ochsner Edge Gilding Machine For semi-automatic edge gilding of a variety of books but particularly suited to the production of pocket diaries up to A4 books. Equipped with: Hand feeding area for end boards and book blocks 4 sanding stations Brushing station Pre-heating of book blocks Gild foil application with 2 rollers Specification: Isdez I Tz Ejpfx Ap Dotn Max: 50 blocks per hour pocket diary size 25 blocks per hour desk diary size.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. • Functionality: Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: E – Module with a deburring roller Isdpfxsz Spmte Ap Detn B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, nominal power: 6 kW (8.16 HP), workpiece height (max.): 120 mm, workpiece width (max.): 780 mm, Q-Fin Topgrinder Year of manufacture: 2017 Maximum part width: 780 mm Part length: unlimited 2 stations for grinding or deburring, rotatable Manually guided grinding plates Mobile machine on rollers Benchtop grinding machine for deburring, grinding, and rounding the edges of sheet metal parts. Integrated vacuum pump for fixing the sheet metal parts to the machine table. Also suitable for small parts and long sheet metal strips. The side and front panels are magnetically held and can be folded down if required. Ergonomic operation via buttons on the handle. Ijdoz Nxmqopfx Ap Dstn Used, in very good condition, with numerous accessories.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-milling cutter 10 face milling operations 4 chamfering operations Itsdpfx Apozpy Drs Dsn 2 water break grooves Calibration support Belt feed direction from left to right Deburring cutter Unit for water break grooves from above and below Can grind 9 profiles – e.g., bullnose, full round, half round, small rounding on the top and bottom, chamfered, quarter round.

Condition: excellent (used), Year of construction: 1993, Edge sanding machine Arminius SP31 Itodpfxor Nbktj Ap Dsn In very good condition.

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Itsdpfjz St Smjx Ap Djn Feed speed 8 m/min. Weight 850 kg

Condition: used, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Year of manufacture: 2005 Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes Itsdpoxwnbusfx Ap Djn - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Itjdpfx Ajycvcxsp Dsn

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Itsdpfx Apey Iu N Ao Don Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 Itedpfx Apoy Sap Aj Dsn - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Itsdpfx Aozzlqnop Djn Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Itodpfoz D Autsx Ap Don Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. Ijdpfezwxy Ijx Ap Detn INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height