Used Ras for sale (69)

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Hfjdpfsr Ngtfjx Abroc Tools recentely grounded. Bending angle preselection via potentiometer

Condition: used, functionality: fully functional, Year of construction: 1963, Motorized Guillotine Shear Make: RAS, Model 52.7, 1040x2.5 mm Year of manufacture: 1963 Technical data Manufacturer: RAS Model: 52.7 Sheet width: 1040 mm Sheet thickness: 2.5 mm Power requirement: 5.5 HP Dimensions: approx. L 1.65 x 1.10 (plus support arms) x 1.10 m Weight: approx. 1 t Hodpfx Absyizi Rorjfc Equipment • Manual blade clearance adjustment • Manual rear gauge 500 mm • Angle stop • Support arms All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 1990, This high-performance swing bending machine RAS 67.30 with single-program control comes from first ownership. Bending capacity: 3200 x 2.5 mm Drive power: 3 kW Machine weight: 3800 kg Hfjdoxmi Hdopfx Abrsc Includes pre-selection of bending angle via rotary potentiometer, second footswitch for two-person operation, continuous 45° upper bending bar, segmented/split and raised upper bending bar H = 100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Hfsdpfx Asv Tk Exsbrsc Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: used, functionality: fully functional, Mechanical Folding Machine Manufacturer: RAS Model: 68.20 2540x3mm Technical Data Make: RAS Type: 68.20 Hfsdoygulgspfx Abrjc Bending length: 2540 mm Capacity: 3 mm Year of manufacture: unknown Upper beam stroke: 220 mm Dimensions: L 3.3 x W 1.0 x H 1.5 m (plus control arm) Weight: 3 t Equipment - 25 mm bending rail - Various segmented rails All information is provided without guarantee. A demonstration at our showroom is possible at any time.

Year of construction: 1994, condition: good (used), electromechanical sheet metal shears brand RAS type 83.20. Year of manufacture 1994. Hjdpfsyiaitsx Abrsfc Cutting length 2040mm up to 3mm thickness Digital measurement of the rear stop 790mm. Sheet metal holder along the entire length - repair (adjustment) required. Rear pneumatic supports. Power 5.5 KW weight 2050kg.

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Sheet thickness max. 1.75 mm. Hfsdpfsvk D Tdex Abrjc

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Hfodjyiu Dhopfx Abrec Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Hedpewq Rumsfx Abrsfc Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Hsdpsv A Tfgefx Abrofc Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar Hsdpsqzibtefx Abrofc INCLUDED drag loading system

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m Hedpfjya Eq Hox Abrsfc

Condition: refurbished (used), Year of construction: 2001, XXL-Center RAS 75.06 - General technical data (in mm): Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper jaws travel range: 10 – 750 mm Clearance in front of jaws up to: 300° Extendable loading tables: yes Gripper jaws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons Hodpsx Hf Tvefx Abrsfc - Machine-specific data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2001 Condition: To be completely overhauled - Images are for reference only -

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Price: On request Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 Hfedjww Eqcspfx Abroc - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears Hjdpfx Aodzd Husbrsfc -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail Hjdpfet Rl Ulsx Abrofc -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg Hfedpsdy Rhdofx Abrsc

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg Hfodpfx Asgxgm Hebrjc

Condition: used, sheet width 2540 mm plate thickness 2.00 mm Hjdpfxexacfte Abrofc thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, sheet width 2040 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 50 Hub/min cutting angle 1.4 Grad table height 750 mm distance between columns 2120 mm back stop - adjustable 1.0 - 550 mm Hfjdpexaaqajfx Abrjc column arm 100 mm Control manuell engine output 5.5 kW weight of the machine ca. 2050 kg. range L-W-H 2600 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display * adjustable from the front * Continuous adjustment over the entire travel range * Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - Connection cable including plug - original instruction manual * Machine link: ?machineno=1008-9325338

Condition: used, Year of construction: 1963, sheet width 1040 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 90 Hub/min cutting angle 2.70 Grad distance between columns 1060 mm work height max. 940 mm back stop - adjustable max. 550 mm column arm 120 mm voltage 400 V engine output 4.0 kW weight of the machine ca. 820 kg. range L-W-H 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind * continuous adjustment over the entire travel range * travel range max. 550 mm - 1x hold-down bar Hjdoxach Ijpfx Abrsfc - 1x side stop - 1x front support arm - original operating instructions

Condition: used, Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h total power requirement 2x 4.0 kW voltage 400 V weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm Hfsdpfoxabz Tox Abrec * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth Hodpfoxcyw Esx Abrjfc * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - New images available: Hodpox Hf E Ejfx Abrefc Listing images 1 to 3 are current pictures Listing images 4 to 5 are reference images of the machine’s configuration regarding table type - General technical data in mm: Bending length: 3200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tons Backgauge system (U-gauge): 10–4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Backgauge + U-shape weight: approx. 1205 kg - Machine-related data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person operation from the front Second footswitch for operation from the rear (including light barrier for rear operation) 15" CNC color graphic touchscreen controller (Touch&More) CNC backgauge and hold-up system (10–1550) Backgauge system (U-gauge): 10–4050 mm

Condition: like new (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 107/50, The machine is in fully operational condition. Multibend 2000 RAS 74.30 folding machine by RAS Reinhardt Maschinenbau GmbH — a universal folding machine with a swing beam, CNC control, a wide selection of segmented tools, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. Elastic deformations of the folding beam depend on the sheet thickness, strength, properties, processed length, and positioning on the support beam. Sensors integrated into the folding beam detect its actual deflection during the first 10 degrees of bending, and the system sends commands to the actuators, which adjust the convexity of the beam, thus compensating for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bend line is always perfectly straight with the set radius, regardless of the metal thickness, length, ductility, strength, or the height and positioning of segments in the bending zone on the beam. Technical specifications: Working length: 3200 mm Max. sheet thickness: 4 mm Minimum bending radius: 1.25 mm × sheet thickness Minimum flange height: approx. 6 mm × sheet thickness Max. opening width of upper beam: 400 mm Adjustment range of folding and lower beam: 80 mm Bending angle: 0–180 degrees Hodpfoyfm Udox Abrofc Max. bending speed: 70 degrees/sec Max. upper beam speed: UP 44 mm/sec DOWN 90 mm/sec Electrical connection: 7.5 kW Backgauge depth: 10–1550 mm Backgauge adjustment speed: 200 mm/sec Pneumatics: 6 bar CNC control: MULTIBEND 2000 Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m Machine weight: 5590 kg Total weight of basic configuration: 5890 kg Year of manufacture: 1997