Used Fasti 2095-32-2 for sale (98)

Condition: used, Fasti 2095-32-2 folding machine In good condition Receive a completely new PLC control from the manufacturer Schröder-Fasti in 2022 Machine number: 95 295 020 operating voltage: 400V frequency: 50 Hz Control voltage: 230 V Connection power: 4,25 kW Rated current: 16.8A usable length: 3240 mm Sheet thickness: 2 mm Lift of the superstructure: 350 mm Lodpfewavndsx Afkohn Adjustability of the lower and bending beams: 80 mm Important NOTE: the machine got a new PLC control in 2022 Control brand: Schröder-Fasti Type: CFP120 Total weight: 6000 Installation dimensions: 4500x3000x2000 (mm) Operating hours: 4574

Condition: used, Year of construction: 1988, sheet width 3000 mm plate thickness 2,0 mm distance between columns 3240 mm Daylight opening 350 mm bending angle max. 0 - 135 ° adjustment of lower beam 80 mm Lhodpfot Syi Tex Afkjn power capacity 2,2 / 1,5 kW total power requirement 3,7 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 4,3 x 1,1 x 1,6 m - manual backgauge

Condition: ready for operation (used), Schröder 204-10/2 Folding Machine Year of manufacture: 2012 Capacity: 2.0 mm Ljdpfx Aexfr R Nefkehn Working length: 1020 mm Upper beam stroke: 220 mm Lower and bending beam adjustment: 60 mm You are welcome to arrange an inspection visit. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued upon provision of a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks mentioned are property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications or errors in the item description may occur and remain reserved.

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket Lhodpju Rimmsfx Afksn - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper beam adjustment via foot switch Lhjdpfx Afef Nwmzoksn

Condition: used, sheet width 1270 mm plate thickness 3.5 mm Opening width / upper beam 350 mm back stop - adjustable max. 750 mm pivoting angle 135 Grad Lower beam adjustment 80.0 mm voltage 400 V total power requirement 3.7 kW weight 1250 kg range L-W-H 2310 x 1070 x 1500 mm Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer - Manual material/backgauge * Adjustment from the rear * Continuously variable adjustment range * Travel range up to 700 mm - Manual/automatic operating mode selectable - Manual lower beam adjustment - 1x freely movable double foot pedal - Operating instructions (PDF) * Special accessories included: Lhodpfx Aoxabdnefken - 1x split set of goat's foot tools (upper tool), height 140 mm

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m². Lodpjvgnm Hofx Afkohn

Condition: used, Year of construction: 1967, sheet width 103 mm weight 300 kg drive ja Gußhebel abgebrochen +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lhodpfxslug Txj Afkjn Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1982, condition: good (used), Motorized round bending machine FASTI type: 106-20-2 year 1982 Bending capacity : 2040 mm X 2 mm in steel Rollers diameter 110 mm , with bending . Roll drive motorized Rolls adjustment motorized Lhjdpsk Iymxefx Afkjn Space requirement: 2,5 m X1 m X 1,2 Weight.ca.2000Kg. Machine in Good Condition Undercurrent Demonstratable .

Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit - electric foot switch weight 3000 kg good condition Lhsdpfx Afsttc Uajkjn

Condition: used, Max. sheet thickness: 2 mm steel Roller center distance: 100 mm Maximum projection: 400 mm Stepless speed adjustment via handwheel Right and left rotation Ledpew U Skpofx Afkehn Hydraulic delivery via foot switch Other rollers on request Weight: approx. 400 kg

Condition: excellent (used), Fasti hand guillotine shears type 505 - 10 - 2 1060 x 2.0 mm Lhsdpfxjwgylae Afkjn

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm coil weight: 7,5 t Lhedsgnc H Dspfx Afken mandrel Ø: 508/610 mm

Condition: used, Year of construction: 2000, Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (backgauge, bending angle adjustment, upper beam stroke, sheet thickness, quantity, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Ledpfow R Uiaex Afkshn Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcement rails operation manual 5700 kg

Condition: used, Max. bending length: 1020 mm Lhedewlp Tqopfx Afksn Max. sheet thickness: 2 mm steel Weight: about 500 kg

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Lodpfx Afowb Efzekehn Max. disc diameter: 1000 mm Motorized drive via foot switch

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Ledpevmz Drefx Afkshn Motorized upper beam adjustment Polished bending rail Weight: approx. 1800 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be preselected via scale Lhsdpfxeq T Ud Sj Afkjn Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Lhodpjum Ttzsfx Afksn Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, functionality: fully functional, Year of construction: 1997, Very nice hand-operated three-roll bending machine Manufacturer: Fasti Model: 103-20-1.25 Working area: 2040 x 1.25mm According to the nameplate, year of manufacture: 1997 VERY LITTLE USED! The roll surfaces are completely smooth, even if the picture may make it look as though there are "grooves" on the left side. Location: Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The information and images were provided by the owner and approved for publication. The visual condition of the offered items corresponds to their age and the pictures shown. The technical condition and wear of the items offered are age-appropriate. Lhodpowu Euvofx Afkon Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Max. sheet thickness: 1.5 mm steel Cutting via hand crank Lhodpfxexn Nzqs Afkjn

Condition: used, functionality: fully functional, Year of construction: 1985, Hydraulic Guillotine Shear Make: FASTI Model: TCHE 20/10 Year: 1985 Technical Data Brand: Fasti Model: TCHE 20/10 Year of manufacture: 1985 Sheet capacity: 2000 x 10 mm Dimensions: approx. L 2.60 x W 2.20 (plus support arms) x H 1.60 m Weight: approx. 5 t Equipment • Motorized backgauge 1000 mm with digital readout • Angle gauge • Support arms • Cut length limiter • Manual blade gap adjustment • Pneumatic hold-up device • 1 x spare blade set Lhjdpsxmgulsfx Afken All information subject to change. A demonstration is possible at any time in our exhibition hall.

Condition: used, Max. sheet thickness: 1.5 mm steel Ledpfx Aexn Nzkofkohn Cutting via hand crank

Condition: used, Max. cutting length: 1060 mm Lhodexn Nx Nspfx Afkjn Max. sheet thickness: 2 mm steel Manual backgauge Weight approx. 500 kg

Condition: used, Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper beam adjustment via foot switch Lsdpfx Afexn Iwdokohn Manual backgauge