Used Column Drill for sale (9,028)

Condition: good (used), Year of construction: 2005, Offer 26119 Technical data: Rodpfx Aaoy D Nxqj Ijw - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 125 mm - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels

Condition: used, Year of construction: 1975, Make: Oradea Infratirea Type: G 16 Machine number: 4966 Year of construction: 1975 Drilling capacity: 30 mm Spindle holder: MK 3 Speed range: 150 to 2,360 rpm Feed rate: yes (defective) Table: 490 x 390 mm Clamping surface: 400 x 300 mm throat depth: 285 mm Quill stroke: 160 mm Rodpfx Asrnrpvoa Isw Headstock adjustment: 200 mm Table adjustment: 350 mm Footprint: 500 x 830 mm Connection: 1.65 kW Equipment: Thread cutting device Condition: good, feed defective Weight: 0.7 t Dimensions: 500 x 830 x 2,100 mm

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Rjdpfxjharwve Aa Iew Weight 850 kg Good condition

Condition: new, Year of construction: 2026, Threading device Quick-release threading device Programmable drilling depth stop Drilling depth and speed display - digital Threading device M30 (dependent on pitch) Opt. R1: Spindle speeds with gearbox, continuously variable, speed range 100-2000 rpm Opt. R2: Spindle speeds with gearbox, continuously variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Rodpfx Aaed H Rh Rs Isw Overhang 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-changing 1.5/3.0 kW Weight 420 kg Option: Drilling kit No. 6: Tapered arbor B18/MK 4, quick-change drill chuck B18/3-16 mm, machine vise No. 2-140 and T-slot screws, EUR 910.00 Option: Automatic spindle stop when drilling spindle is at the top, EUR 432.00 Option: Chip breaker module, EUR 432.00 Delivery: Free to your doorstep including packaging (only Germany) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle Taper: MK II Drilling Depth: 100 mm Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Slot Width (mm): Number: 2, 125, 13/26 Speed Display: Digital Drill Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Drill Feed Table Height Adjustment with Rack-and-Pinion Motor: Three-phase AC – frequency-controlled, 230 V, 0.75 kW Spindle Speeds: Infinitely variable 30 – 3000 rpm Table Work Surface: 155 - 415 mm Base Work Surface: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Rjdpfx Aaevu Tmnj Isw Optional Accessories Drilling Bundle 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-action drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 D0Ezfi Factory warranty: 3 years Free delivery including packaging (Germany only) Delivery time: available immediately from stock NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN OFFER!

Condition: used, functionality: fully functional, Column drilling machine Tool holder MK 4 With gear transmission, quill feed. Rsdpoy A Sz Sjfx Aa Iow

Condition: ready for operation (used), Year of construction: 1975, Column drill press Manufacturer: CORDIA, Type: S-18, Year of manufacture: approx. 1975 Drilling capacity in steel: max. 18 mm Rodpjhtri Ejfx Aa Iew Spindle mount: MK2 Spindle speeds: 90 - 1450 rpm Spindle stroke: 120 mm Table: 350 mm x 400 mm clamping surface; 270 mm x 320 mm Space required: Width 420 mm, Depth 650 mm, Height: 2000 mm Weight: approx. 350 kg Machine is ready for use.

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Rsdpfxjmp Tp He Aa Ijw Machine is ready for use .

Condition: excellent (used), Year of construction: 2000, Column drilling machine Fabr.IXION Type: BS 30 Year of manufacture: approx. 2000 Spindle holder :MK 3 spindle speed : 160-2800 rpm Rsdpfjtwnv Tex Aa Ijw spindle stroke : 150 mm Drilling capacity in steel : 30 mm Table: 550 mm X 400 mm With machine vice jaw width 110 mm , drill chuck Röhm 1-13 mm Machine has worked little has only drilled wood . Dimensions: 90 cm X 55 cm X 190 cm Weight: approx. 300 kg.

Condition: good (used), Column drill press Manufacturer: ALZMETALL, Type: AB 4 SJ (approx. year of manufacture: 1970) with coolant system, continuously variable speed control, with 2 gear stages. Max. drilling capacity in steel: 40 mm Spindle mount: MK 4 Redpfxjlq D Ake Aa Ijw Spindle speeds: 80 - 720 rpm Max. spindle stroke: 150 mm Feed rates: 0.09 / 0.16 / 0.28 mm/rev Table diameter: 560 mm Machine is ready for use.

Condition: ready for operation (used), Column Drilling Machine / ALZMETALL AB 3 ES from vocational school Rjdpfx Ajyzakrsa Ijw - Well-maintained original condition - Drilling capacity / steel max. 35 mm - Throat depth 280 mm - Table size 600x470 mm - Drilling stroke 180 mm - Morse taper MK 3 - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 480 kg Errors and omissions excepted.

Condition: used, Brand: Ibarmia-1B-35 Rsdpfxoxqmvko Aa Isw Description: Dividing head bell, 2 stations

Condition: new, Year of construction: 2024, NEW Pillar Drilling Machine FLOTT SB 25 plus - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical protection - Continuous/normal drilling capacity (mm): 23/25 - Thread cutting capacity (dependent on pitch): M16x1 Rodpjf S Tfnjfx Aa Iew - Spindle: MK III - Drilling depth (mm): 115 - Overhang (mm): 260 - Usable work surface (W x L) (mm): 420 x 340 - Table height adjustment with rack and pinion - Spindle speeds, stepless (1/min): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 Further TECHNICAL DATA can be found in the product data sheet! OPTIONAL Drilling Package 4 (296593) - € 595.00 - Vise [felix] 2.0 120 - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) - Tapered mandrel B18/MK III - Reducing sleeve MK III/MK II - Reducing sleeve MK III/MK I 3 years warranty for single-shift operation Delivery: free to your door including packaging (Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, NEW FLOTT SB 13 plus Pillar Drilling Machine - Spindle: B 16 (MK II additional charge €160 / Article no. 212504) - Tapping device - Control panel with OLED display - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Continuous/normal drilling capacity (mm): 13/15 in E335/ST60 - Tapping capacity (depending on pitch): M10 - Drilling depth (mm): 60 - Throat depth (mm): 220 - Usable work surface (W x L) (mm): 300 x 250 - Rack-and-pinion table height adjustment - Infinitely variable spindle speeds (rpm): 40 – 4000 - Dimensions (mm): 420 x 540 x 1780 Rsdsxrdrxepfx Aa Ijw For more TECHNICAL DATA, please refer to the product sheet! OPTION Drill Package 2 (296591) - €300.00 - [felix] 2.0 80 bench vice - Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm) - Taper arbor B16/MK II - Reducing sleeve MK II/MK I 3-year warranty for single-shift operation NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Condition: excellent (used), Year of construction: 1979, Drilling capacity 32 mm Spindle taper MT 3 Throat 290 mm Quill stroke 160 mm Table size 510 x 300 mm Column diameter 115 mm Spindle speed 55 - 1450 rpm, stepless Motor power 0.9 and 1.3 kW, pole-switchable Power connection 380 Volt, 50 Hz Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless via variator Table height adjustment via handwheel Machine lamp Quick-release drill chuck 1 to 13 mm Required space L x W x H 1200 x 650 x 1900 mm Weight 400 kg very good condition Redew H Namjpfx Aa Iew

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm Redpfeq U Swgjx Aa Ijw - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: new, Year of construction: 2024, Thread cutting device OLED display LED lighting Continuous/normal drilling performance (mm) - R1 27/32 mm - R2 25/30 mm Thread cutting performance max. - R1 M34x3 - R2 M20x2.5 Spindle MK III Drilling depth (mm) 125 Throw (mm) 300 Column diameter (mm) 125 Usable table area (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,140 mm Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Rsdpfett Af Rex Aa Isw Weight (kg) 370 Optional drilling package 5 (€ 855.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 Rjdpsx Hh Dwofx Aa Isw 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Rsdpfx Aaovu Dv Hj Ijw Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Rsdowk Nxqopfx Aa Iow Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm Rjdpfowncaiox Aa Isw - Weight approx. 350 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Technical Data: - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm Rsdsw Id Ndjpfx Aa Iow - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel: 15 mm - Drilling capacity - in aluminum: 18 mm - Drill spindle mount: MK 2 - Drilling depth: 70 mm - Spindle overhang / column: 180 mm - Drill spindle speeds: 80 - 4000 rpm - Drive: 400 V, 0.45 / 0.75 kW - Height-adjustable drilling table: 280 x 240 mm - Distance drill spindle / table: approx. 360 mm - Distance drill spindle / base plate: approx. 410 mm - Space required: approx. W 280 x H 1700 x D 600 mm - Weight: approx. 85 kg Rsdpokt N Nlofx Aa Ijw - Includes: - Quick-change drill chuck 1 - 13 mm - Machine vise - Assorted used HSS drill bits 5 - 15 mm

Condition: good (used), Year of construction: 1985, machine/vehicle number: 0125153, Offer 24280 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drill spindle holder MK 3 - Drill spindle stroke 175 mm - Drill spindle speed infinitely variable 60 - 1600 rpm - 3 feeds 0.1; 0.16; 0.25 mm/rev - throat depth 290 mm - max distance drill spindle - table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank Rsdpst Hr Svefx Aa Iew - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button - emergency stop button - lighting - Machine vice - 15 HSS drill bits 8 to 20 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm Rsdpfx Aevxhdcoa Iow - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck