Used Highspeed radial drilling machines for sale (40)

Condition: good (used), Year of construction: 1979, Functionality: fully functional, drilling capacity: 32 mm, overall weight: 1,870 kg, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Cgebvbowgahbjauust Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: excellent (used), Year of construction: 2006, We are selling a reliable ALZRAPID 32 in good condition. The machine is ready for demonstration under power and available at short notice. Please refer to the following description for technical specifications: Csbvovt U Tgobauuegt Technical Specifications: Spindle speeds: 102/152/204/250/304/408/500/608/816/1000/1216/2000 Short spindle: MT4 Drilling capacity steel E 335 (St 60) *1): 32 mm Drilling capacity cast iron EN-GJL-200 (GG 20): 32 mm Motor: 1500/3000 rpm Accessories: - Digital display with glass scales - Thread cutting - R 0 L adjustment - Adjustable feet - Documentation and operating instructions

Year of construction: 1983, Condition: refurbished (used), Work table 600mm x 1200mm Cjbsmt Ed Revbauusgt cantilever travel 600mm tool holder MK 4 drilling capacity 32mm in steel Thread cutting device Coolant device Electrical system 24V control voltage emergency stop 2-channel Protective device on drill General overhauled 2022 12 months warranty New painting RAL 7035/7031

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: Radial drilling machine Donau Type DR 40 Digi Year of manufacture 1989 Cgebvbev Uh A Rjauuet MT 4 Drilling capacity 50 mm Throat 600 mm Column diameter 195 mm Table 1 / 1200 x 600 mm Table 2 / 800 x 400 mm Quill stroke 200 mm Distance spindle to table 350 – 905 mm Spindle speeds up to 2800 rpm Weight 2500 kg Price: €6,500 plus VAT, ex location

Condition: new, Year of construction: 2025, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Cebvbajtzkmbsuuegt Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm Cgobvoirax Uebauuet -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: good (used), Functionality: fully functional, Data --- Drilling capacity 40 mm / St. 60 --- Tapping capacity M 33 mm / steel --- Mounting MK 4 --- Cgjbvbajwa Dh Ssuuot 18 speeds 35 - 1,800 rpm --- 5 feeds 0.075 / 0.15 / 0.3 / 0.45 / 0.6 mm/rev --- ----

Condition: ready for operation (used), Otto Müller SR 30 High-speed radial drill Drill spindle holder (Morse): 40 mm Longitudinal displacement drill head (X-axis): 750 mm Arm travel height (Y-axis): 450 mm Spindle diameter: 70 mm Max drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer to the left of the machine in the picture Transport possible at more price. Csbovilzgjvbauuegt Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 30 Fast Radial Drill Drill spindle mount (morse): 40mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 450mm Spindle diameter: 70mm Max drilling depth: 150mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer on the left of the machine in the photo Transport possible at an additional cost. Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 30 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 40mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 U/min Abmessungen: 175x120x235cm (LxWxH) Power supply: 380 V Ohne Ölskimmer links neben der Maschine im foto Transport gegen Aufpreis möglich. Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: good (used), Year of construction: 1978, Functionality: fully functional, Work table 750mm x 1200mm Boom travel 700mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Cgebvbaovwin Heuuet Protective device on the drill

Condition: good (used), DONAU DR 40 Z - High-speed radial drilling machine incl. tools -Drill spindle holder : MK 4 -Pinole diameter 55mm -quill stroke 220mm -18x spindle speeds 35-1800 rpm -Drilling feeds 0.075-0.60 rpm -Height adjustment of the drilling column 450mm -Drilling radius min/max 305/1005mm -table size 1200x600mm -Drilling capacity / steel 40mm Cjbvsugaatebauusgt -Drilling capacity / GG 50mm -Tapping capacity / steel M33 -Tapping capacity / GG M45 -MISCELLANEOUS TOOLS SEE PICTURES Dimensions: LxWxH 1,9x2,3x2,8 meter / weight 1800Kg Errors / input errors excepted

Condition: excellent (used), Year of construction: 1973, overall weight: 650 kg, spindle mount: MK 2, High-speed radial drilling machine Make Donau Type DB 13 G Spindle holder MK 2 YEAR OF MANUFACTURE 1973 Table size 1000 x 700 mm Speed 300 - 3400 rpm. infinitely variable Cebvbaoqzk Eijuujgt Transport dimension : W.1200 mm Depth 2000 mm Height 2000 mm Weight 650 kg

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 50 mm Cebju Rt N Eevbauujgt arm length 1250 mm table surface area 1200x800 mm feed - independent 0,1- 0,5 mm turning speeds 50- 1200 U/min taper MK 5 total power requirement 7 kW weight of the machine ca. 5 t dimensions of the machine ca. 2 x 1,6 x 1,9 m

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 30 mm arm length 950 mm table surface area 1350 x 545 mm bore stroke 150 mm feed - independent 0,003 - 0,25 mm Cebvov Nq Thjbauuegt turning speeds 115 - 1500 U/min taper MK 3 total power requirement 2,2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,0 x 1,4 x 2,3 m High-speed radial lathe with: - Feed - Thread cutting device - Continuously variable speed control - Machine light

Condition: ready for operation (used), Otto Müller SR 23 Fast Radial drill press Drill spindle adaption (morse): 30 mm Longitudinal displacement drill head (X-axis): 750 mm Arm stroke (Y-axis): 350 mm Spindle diameter: 55 mm Max drilling depth: 125 mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new controls, ready to put to work. Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 23 Fast Radial Drill Drill spindle mount (morse): 30mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 350mm Spindle diameter: 55mm Max drilling depth: 125mm Cjbvbajvilzmouuogt Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new control, ready to put to work. Transport possible at an additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 23 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 30mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 350 mm Spindle diameter: 55 mm Maximum drilling depth: 125 mm Speed: 2400 U/min Abmessungen: 175x130x215cm (LxWxH) Power supply: 380 V Völlig neue Steuerung, sofort einsatzbereit. Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: refurbished (used), Year of construction: 1996, Functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive Cgjbvbev If T Tjauuet AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Cgjbvovylh Ujbauuot Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 Csbvbaoikvcaeuujgt ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: good (used), Functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Cebvbsrn Riqjauujgt Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: good (used), Description Table: 1100 x 500 mm Spindle cone: Morse 3 working capacity: 32 mm tapping capacity: M30 spindle stroke: 150mm column stroke: 410 mm Cjbvsiyy I Tobauuegt Minimum radius: 300 mm Maximum radius: 900 mm Rotation on column: 360º Rotation speed: 12, from 102 to 2000 rpm Clamping: hydraulic Weight: 1250 kg.

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm Csbsv Ay T Dovbauujgt -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump *

Condition: good (used), Year of construction: 2000, Functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cebju Aa I Sevbauusgt Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm thread M 33 St 60 thread M 45 GG 22 turning speeds steps 18 Stufen Cebvbausu T R Rvsuegt quill stroke 200 mm arm length 1207 mm bore spindles - Morse Taper 4 MK feed range 0.075 - 0.60 mm/U feed steps 5 Stufen turning speeds 56 - 2800 U/min column diameter 195 mm work table: H = 800 mm boring spindle Ø 55.0 mm revolutions per minute 1410 / 2840 U/min surface area 1200 x 750 mm total power requirement 2,0/3,0 kW weight of the machine ca. 1480 kg range L-W-H 2450 x 2450 x 2800 mm well-maintained condition current new price approx. 60.000 euros with lots of special accessories (!!) special price on request Equipment: - electro-hydraulic, robust high-speed radial drilling machine - compact design with hydraulic quick clamping - 3x speed ranges (56.0 - 2.800 rpm) - electro-motor height adjustment - pole-changing drive motor - R/L running of the work spindle - manual & automatic spindle feed * feed rows: 0.075/0.15/0.30/0.45/0.60 mm/rev - large work table with 5x T-slots (distance 125 mm/width 18.0 mm) - thread cutting device - coolant device in the machine base - EMERGENCY OFF button at the front - adjustable machine light (230V) - 1x heavy RÖHM machine vice - 1x quick-change tool holder with a large number of inserts - Central lubrication - T-slots = Can be clamped at the back of the machine - Original operating instructions + machine card Other technical data: - Distance... spindle center - column: * min. 305 mm / max. 1.305 mm - Distance... spindle nose - base plate: * min. 1150 mm / max. 1.600 mm

Condition: refurbished (used), Year of construction: 1997, Functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Cgobvbsvv Spkoauujt Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1997, Functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB Cgebvermkfnobauust

Condition: refurbished (used), Year of construction: 1997, Functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for Cebvbaou Dg D Ajuuegt probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB