Used Plate Developer for sale (12,287)

Condition: used, Year of construction: 2010, Format: 830 x 660 mm Fgjdpfjyxquiex Apwef

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Fodpjzgw D Refx Apwogf Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T Fgsdpfxjzmxrie Apwsf

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Fodpfxjzmxq Ej Apwegf Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Fgjdpfxszmxqxj Apwef Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T Fedpfjzmw Hxjx Apwogf

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Fgodpsywziuefx Apwef

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm Fedpfxsy Aubus Apwegf pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg Fodpfx Apowk Rlxewjgf

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE Fgjdpfx Aod Eqg Hjpwjf

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 1 Plate thickness 400 mm Fgsdjv Ey Nqepfx Apwof weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m This plate has 10 t- slots in length direction each 32 mm wide.

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring Fsdpfxoznnd Rj Apwegf machine. Size is 2750 x 1400 x 340 mm.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° Fgsdpfxet Tqkdj Apwof back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm Fgodpfxsftfcws Apwof total power requirement 0 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Fodpfx Aoww Nccspwsgf Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm Fsdoxu Nrpopfx Apwsgf angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: used, Year of construction: 1990, length 4000 mm width 1500 mm table height 500 mm Fjdjftfchepfx Apwogf total power requirement 0 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,5 x 1 m

Condition: used, length n.n. mm width n.n. mm total power requirement 0 kW weight of the machine ca. n.n. t dimensions of the machine ca. n.n. m Some spotting plates in different sizes, without table legs. Price per sqm. We have following sizes: 1500 x 1000 mm 1000 x 1000 mm (2 pieces) 1000 x 800 mm 600 x 500 mm 400 x 300 mm 210 x 130 mm Fgsdpjznndwsfx Apwsf round with diameter of 520 mm.

Condition: used, Year of construction: 1985, length 3000 mm width 2500 mm number 10 Plate thickness 350 mm weight of the machine ca. 5,14 t dimensions of the machine ca. 3 x 2,5 x 0,35 m Fsdpfx Apox Avqhewegf 10 pieces T- slotted floor plates with 32 mm slots.

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW Fjdpfx Apjt Tqnvswjgf weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: used, Year of construction: 1980, length 3500 mm width 1750 mm thickness of bolster 260 mm Fsdpfjw U Eiljx Apwjgf number 2 St no. of flutes 6 weight 5 t 2 pieces T slotted floor plates with 6 slots, each 36 mm width. All dimensions and price is only for one plate !

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm Fodpozafi Nofx Apwogf adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 1990, table length 2500 mm table width 1250 mm table height 950 mm total power requirement 0 kW Fsdpfxeftfcdo Apwogf weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5 x 1,25 x 1 m plate is heated.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roller rolling machine *SAY-MAK SRM 1550 x 90* *Technical specifications:* - *Year*: 2019 - Serial number: 59860 - *Capacity*: 2mm steel / 1.5mm stainless steel, with a width of 1550mm - *Minimum diameter*: 90mm - *Motorized*: Yes, with forward/reverse foot pedal - *Controls*: Control box with emergency stop + digital display - *Weight*: 580kg - *Voltage*: 380V, three-phase - *Condition*: Very good condition, well-maintained 2019 machine Perfect machine for sheet metal work, ventilation, and metal fabrication. Fgedpfozr Rduex Apwsf Reputable Turkish brand, spare parts available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roll bending machine, brand *SAY-MAK*, model *SIR 1270 x 68*. *Specifications:* - *Year*: 2019 - Serial No.: 6375291 - *Usable width*: 1270 mm - *Steel capacity*: 1.2 mm / Stainless steel 0.8 mm - *Minimum diameter*: 68 mm - *Motorized*: Yes, with foot pedal for forward/reverse operation - *Electrical cabinet*: 380V Three-phase - 0.75 kW - Emergency stop - *Weight*: 350 kg Fgodpjzr Rdhjfx Apwof - *Condition*: Very good condition, 2019 machine Ideal for sheet metal work, ventilation, zinc work, and stainless steel applications. Compact and precise machine. Robust Turkish brand, spare parts available.