Used Shelf Stand for sale (10,250)

Condition: good (used), The scope of delivery includes: 01x stand protection, used Manufacturer: Meta (Thyssen) Material color: orange Total height: approx. 1,255 mm Codpov Du Uxsfx Ab Usgr Total width: approx. 105 mm Inner width: approx. 86 mm Suitable for frame profile: 85 mm Material thickness: approx. 4.0 mm Total depth: approx. 60 mm Deflector height: approx. 50 mm Leg dimensions: approx. 75 x 75 mm Original clip tabs Weight | piece: 12.51 kg. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, Technical data for the shelf rack upright: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x shelf rack upright, new goods Material color: sendzimir galvanized profile dim.: approx. 60 x 30 mm Incl. bulkhead and base plates The uprights are unassembled 2.490 mm high 500 mm deep Cgsdpfjpbwahjx Ab Uor Remark: The shelving uprights are supplied unassembled when ordered unassembled when ordered. For an extra charge of 7,50 € / piece plus VAT we can also preassemble the also pre-assemble the uprights. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet rack stand: Shelving system: Stow Type: Pal Rack NS Included in delivery: 01x pallet rack stand, used Material color: RAL5015 sky blue Stand type: PNFB 12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) Frame height: 1,750 mm Frame depth: 1,100 mm Your contact person in our company: Csdpfx Ajv Idkdeb Usgr Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack uprights, single supports, stiffening profile, shelf plates, shelves, shelf board -Storage rack: steel shelf stands and wooden shelves in various sizes -Shelf stands: Dimensions 1990 x 500 mm (10 Euro net) 27 pcs. / 2992 x 500 mm 5 pcs. (12 Euro net) -Shelves: 1000 x 500 mm 339 pcs. (5 Euro net) / 1000 x 600 mm 218 pcs. (6 Euro net) -Weight: Stands 5.4 to 8.4 kg/piece / Shelves 5.6/6.3 kg/piece Cgsdjr U Sgwepfx Ab Ujr

Condition: like new (used), TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,200 mm (new) Shelf: 1,220 x 400 x 0.6 mm (used) Shelf load capacity: 150 kg Number of levels: 5 Assembly type: Boltless assembly SCOPE OF DELIVERY 1 x Starter bay 1 x Add-on bay 1 x Cross brace Large quantities available. Tiered pricing available for bulk purchases. PRICE €244.55 gross €205.50 net ----- This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding, customized offer for you. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the equipment. TERMS OF PAYMENT Cgodpfjxwwinex Ab Ujr Terms of payment are to be agreed upon in the event of an order. The price is quoted per unit/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for commerce, industry and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four Wins – The Success Factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: like new (used), TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf: 1,220 x 400 x 0.6 mm (used) Shelf load capacity: 150 kg Number of levels: 5 Assembly type: Boltless assembly SCOPE OF DELIVERY 1 x Starter bay 1 x Extension bay 1 x Cross bracing Large quantities available. Tiered pricing for larger purchase quantities is possible. PRICE €232.05 gross €195.00 net ----- This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized offer tailored to your requirements. TRANSPORT & INSTALLATION Cgsdpfxexwwiho Ab Ujr We are happy to assist you with the transport and assembly of your items. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is to be understood as a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US The company DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveying technology, mezzanine floors, textile storage as well as machinery for trade, industry, and the trades. We continuously offer a wide range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Connect Four – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: like new (used), TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,200 mm (new) Shelf: 1,220 x 400 x 0.6 mm (used) Shelf load capacity: 150 kg Number of levels: 6 Assembly type: Boltless assembly SCOPE OF DELIVERY 1 x starter bay 1 x extension bay 1 x cross brace Large quantities available. Tiered pricing available for larger orders. PRICE €265.97 gross €223.50 net ----- This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon at the time of order. The price quoted is per unit/net price, or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. Cgodpsxwwhdofx Ab Ujr ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer attractive used items from various manufacturers/brands at favorable terms. If you have any questions, please do not hesitate to contact us. 'Four for Success' – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: like new (used), TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf: 1,220 x 400 x 0.6 mm (used) Shelf load capacity: 150 kg Number of levels: 6 Assembly type: Plug-in system SCOPE OF DELIVERY 1 x base unit 1 x add-on unit 1 x cross brace Large quantities available. Tiered pricing available for bulk orders. PRICE €253.47 gross €213.00 net ----- This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized offer. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms to be arranged in case of order. The price is per piece/net price or as indicated in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US Codpfx Abexwwg Hs Ujgr DLK, based in Nordhorn, deals in new and used products in warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four Wins – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: not inspected (used), functionality: unexamined, total height: 2,800 mm, total width: 2,000 mm, total length: 12,000 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dimensions per storage shelf: 2,000 mm x 1,300 mm Number of pull-out shelves: 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,000 x 2,800 mm Weight: 2,000 kg External reference: Pieper - Lot 9 Cgjdpjyn I Nhofx Ab Uor

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Codpfxeygvnij Ab Usgr

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Cgodpfx Aboxg Igio Ujr

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Cedoh Dv Uqjpfx Ab Uogr Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: used, Year of construction: 2001, Used machine Cgjdpjxvnpcsfx Ab Ujr Year of manufacture: 2001 Features and technical data: - Cutting length: 5300 mm - Vertical cutting height: 2150 mm, horizontal: 2100 mm - Maximum cutting depth: 60 mm - Saw blade diameter: 250 mm; bore 30 mm - Motor: 4 kW - Speed: 5100 rpm - Material support with rollers - Fixed support elements for secure positioning of workpieces - Central support: robust support elements at working height, can be folded out manually, individually - Measurement readout for: - Horizontal cutting via scale - Horizontal cutting via stop rail from 50-500 mm - Vertical cutting via stop from 0-1300 mm - Air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: by double cut of main saw blade. The plunge depth of the saw blade is limited by simply adjusting a stop, so the blade scores the workpiece in the direction of feed Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor Codpsyyqz Sjfx Ab Ujgr • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Year of construction: 2022, condition: good (used), Test stand for filter testing, filter testing, filter test system, filter measurement system, filter test system -Manufacturer: Lorenz, Filter Test System Type FMP 03 with accessories -Filter holder: Type FH 143/149 -Accessory case: with extensive contents -Individual components/accessories: see photos Codpfjyk Ahwex Ab Usgr -Dimensions: 600/560/H975 mm / 640/460/H1130 mm / 430/340/H125 -Weight: 146.3 kg

Condition: used, Storage location: Supplier Codpfx Aboynttfe Usgr

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany Cedjfdkb Tspfx Ab Uegr - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm Cedpfxsh R Taqo Ab Uegr - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) Cgsdpomhhypsfx Ab Uor - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Cgjdpjmhh Dhefx Ab Uor Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Cgodpfomhh Dzox Ab Ujr - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Cedpfx Ajmhh Anjb Ujgr Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Cgodjguk A Hjpfx Ab Uer Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Cgodpsguk Dkjfx Ab Uor - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Cgedpfemhhy Nex Ab Uor Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.