Used Phrase Bench for sale (2,449)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Gjdpfx Afjxz E N Djnobh

Condition: like new (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,250 mm, table load: 5,000 kg, spindle diameter: 105 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 1,400 mm, table width: 1,400 mm, feed length W-axis: 630 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill diameter: 105 mm, year of last overhaul: 2025, The machine is in excellent technical condition after a complete mechanical overhaul. Equipped with a Heidenhain iTNC 530 control system. Gjdpfxsx E Uhao Afnobh

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories MARCELS MASCHINEN CH Gbodstpgcnjpfx Afnsh

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Accessories Gbsdpfxeuy Sazo Afnsh MARCELS MASCHINEN CH

Condition: as good as new (ex-display), Year of construction: 2016, machine/vehicle number: PRJ053143, functionality: fully functional, spindle mount: MK 2, throat depth: 190 mm, drilling capacity: 14 mm, column diameter: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 230 rpm, stroke length: 80 mm, Equipment: rotational speed infinitely variable, Exhibition machine, year of manufacture 2016 – without drill chuck. -With minor signs of use. The machine was only used for demonstration purposes in our showroom; the original warranty card and operating manual are included with the machine. Collection preferred – shipment within Germany available upon request Standard features: - Digital speed display (LED) - Stepless speed adjustment - Reversing switch for clockwise/anticlockwise rotation - Spindle guard with electrical interlock - On/off switch with lockable emergency stop flap - Connection plug pre-installed, cable length 3m - Paint finish: DD textured paint light grey RAL 7035, anthracite RAL 7016, black ----- Gbodpsycuf Eofx Afnsh Technical data: Drilling capacity in steel E335 (St 60): 14mm Thread cutting in steel E335 (St 60): M10 Tool holder short spindle: MT2 Throat depth: 190mm Spindle stroke: 80mm Column diameter: 65mm Feed: Manual Machine table height adjustment: with hand crank Drive: Infinitely variable Drive motor: 0.54kW Spindle speeds: 230–4,000 rpm Operating voltage: 230V/50Hz

Year of construction: 2001, condition: used, OSCAM HSEL 100/3-way cutting bench Gjdpfx Afeyartujnebh Cutting capacity: 40 mm Cutting capacity: 40 mm

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min Gbodpfx Asu Id D Ujfneh spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available * Gbedeu N E Evepfx Afnsh

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m Gedpfx Afevc Aytonsbh equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: good (used), We offer the following: Gsdpfx Afeycvh Ienebh 1 x spotting plate / spotting table Dimensions: 1200 x 800 x 800 mm (LxWxH) An inspection is possible at any time.

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Gbjdpfx Asc Uydaefnoh Location: Off the shelf 54634 Bitburg

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Gjdowq Ea Rspfx Afnebh Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Bernardo Bench Drill DMT 25 Technical Specifications - Drilling capacity max.: 25 mm - Tapping capacity max.: M20 - Morse taper: MT 3 - Spindle speed (5 steps): 340 – 2180 rpm - Throat depth: 240 mm - Max. distance spindle/table: 355 mm - Distance spindle/baseplate: 670 mm - Quill travel: 135 mm - Column diameter: 85 mm - Table size / T-slot size: 252 x 252 mm / 14 mm - Working area baseplate: 365 x 305 mm - Motor output (S1 100%): 1.1 kW / 400 V Gbedpfx Afsyamz Hjnjh - Motor input (S6 40%): 1.5 kW / 400 V - Machine dimensions (W x D x H): 500 x 820 x 1260 mm - Weight: approx. 184 kg Features • Safety guard according to CE standard, adjustable for each drill length • Machined worktable, height adjustable via rack-and-pinion with hand wheel • Ground baseplate with T-slots for securing large workpieces • Adjustable drilling depth stop for precise quill positioning • Guaranteed spindle run-out accuracy ≤ 0.02 mm measured in the quill • Powerful drive motor, suitable for continuous operation • Robust, high-performance drill presses for heavy-duty use • Includes automatic reversing for tapping operations Scope of Delivery • Key-type drill chuck 5 – 20 mm / B 22 • Drill chuck arbor MT 3 / B 22 • Reducing sleeve MT 3 / MT 2 • Tapping device • LED machine lamp • Height-adjustable safety guard

Condition: ready for operation (used), Year of construction: 1998, Spindle moulder T150 with feeder – €5,500 Spindle moulder T130 with feeder – €3,500 Gbjdpfxjx Av Aqo Afneh Spindle moulder SAC with feeder – €2,500 Set of 20 cutter tools – €2,000

Condition: ready for operation (used), De Trimos Horizon Setting HS4 is een uiterst nauwkeurige meet- en kalibratiebank, ontworpen voor werkplaats- en laboratoriumomgevingen. Hij is bijzonder geschikt voor de kalibratie van meetinstrumenten met vaste en variabele afmetingen, zoals micrometers, binnenmeettasters, meetklokken en schuifmaten. Belangrijkste specificaties: Meetbereik : 0 – 2050 mm (0 – 80,7 inch) Max. Toelaatbare fout (EMPE): 0,7 + L/1000 µm Herhaalbaarheid (2σ): 0,5 µm Resolutie: 0,00001" (0,0001 mm) Meetkracht: 15 N Interfaces: USB / RS232 Gewicht: 181 kg Maximale verplaatsingssnelheid: 1500 mm/s Gbjdpfx Aex Imkxefnsh

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Gsdpfx Aeumv Emofnebh Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Gbodpfefnm Dqox Afnjh Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Gedpju Aa A Aofx Afnebh Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), EDAG EDAG Huf endurance test bench Purpose: This test bench is intended exclusively for testing parts that are capable of rotational and/or translational movement as part of an endurance test and within the limits of the following technical data. Technical data: Dimensions: width 1565 mm x depth 615 mm x height 1655 mm Weight approx. 450 kg Operating voltage 400V /50Hz Control voltage 5, 24 Provisional fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum moment 5 Nm Break-out force (manually operated slide) 15 N Displacement force (manually operated slide) 10 N Other equipment Ρ4, 24" TFT monitor (1900 X 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards 1 card, NI PCI-6251,1 card, N1 PCI-7044 Drawer 500 mm (fully extended with automatic closing) Additional load 500 N Drawer cabinet, lockable 3 drawers The teach-in endurance test bench is a device for carrying out endurance tests On test objects that can rotate and/or move translationally, e.g. cylinders Locks, door handles, key functions. Condition: used Gedpfsvx S Apox Afnsbh Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Gsdpfx Aslx A T Dsfnobh power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Gbjdpeiu H Hcjfx Afnsh Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. Gjdpsn E N E Eofx Afnobh • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: used, functionality: fully functional, machine/vehicle number: 18783, We offer a double bench grinder, which is still in good condition. - With base frame - Electric motor 220V / 50Hz - P1 1100W, P2 800W, 3000 rpm Gbedpsx A A H Nsfx Afneh If you have any further questions or are interested, we are at your disposal.

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2500/1,5 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2640mm - Sheet metal thickness up to 1,5mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 24 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 500kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 240 EUR All prices are plus 19% VAT. Godpfx Ajtctmbsfnebh Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Gjdjtctmfjpfx Afnobh Self pickup Certificate CE Guarantee: 12 months. Self pickup