Used Bench Saw for sale (9,032)

Year of construction: 2001, condition: ready for operation (used), Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible. Isdpfxjurwy As Agzjik

Condition: good (used), Contactor, semiconductor contactor, contactor Isdpfxob A N Alo Agzjik -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: excellent (used), Double bench grinder Iiodjk Iwx Eopfx Agzok

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 Iedpfx Agewxmhlezsik 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM Ijdpefv Hphsfx Agzjik The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Iodpjw Nbhmjfx Agzoik Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: used, Vesto saw with two discs for sale Ijdpfx Aetqt T Isgzsik - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available Iisdpsb A N Akefx Agzjk -Weight: 2 kg

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Iedpfx Ageb Rnv Sszoik Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head - for sawing pallet boards - feed chain Ijdoupt Siepfx Agzeik - feed pushers from the top

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Iisdpfed H Hmhex Agzsk CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 409081, saw blade diameter: 300 mm, cutting length (max.): 8,000 mm, cutting height (max.): 3,000 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height (vertical): 3,000 mm Max. cutting width: 8,000 mm Max. saw blade diameter: 300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 8 A Fuse: 16 A Power output: 3.0 kW EQUIPMENT CE marking Iijdpfjx Hg Uhox Agzsk Horizontal cutting Vertical cutting

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Iisdpfx Agewuz Irozsk

Condition: new, Table size: 420 x 450 mm Ijdpfx Agec Snvfezjik Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: ready for operation (used), De Trimos Horizon Setting HS4 is een uiterst nauwkeurige meet- en kalibratiebank, ontworpen voor werkplaats- en laboratoriumomgevingen. Hij is bijzonder geschikt voor de kalibratie van meetinstrumenten met vaste en variabele afmetingen, zoals micrometers, binnenmeettasters, meetklokken en schuifmaten. Belangrijkste specificaties: Iedpfxex Imkxe Agzsik Meetbereik : 0 – 2050 mm (0 – 80,7 inch) Max. Toelaatbare fout (EMPE): 0,7 + L/1000 µm Herhaalbaarheid (2σ): 0,5 µm Resolutie: 0,00001" (0,0001 mm) Meetkracht: 15 N Interfaces: USB / RS232 Gewicht: 181 kg Maximale verplaatsingssnelheid: 1500 mm/s

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg Iiodpfx Aox Ityyegzsk

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Isdpfx Agex I Siyjzjik Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: not inspected (used), Used machine Used vertical panel saw by Holz-Her, type 1210 Older model; suitable only for coarse cutting Technical data: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Maximum saw blade diameter 300 mm Motor power 4 kW Isdexviuajpfx Agzeik Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min Iiedsxb Edzopfx Agzek height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, Ijdpfx Aoxdl N Ajgzeik digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser ----- Technical Data ----- Cutting length: 3,200 mm, Cutting width: 1,300 mm, Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: - complete basic inspection - complete basic cleaning - electrics checked - immediately operational

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: Rapid, table saw with lateral sliding table -Type: PK 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm, (max. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° Iijdpfx Aom Sk Ipjgzok -length stop: -Dimensions 2090/1700/H1270 mm -Weight: 218 kg with pallet

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Roller conveyor - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Iijdpsx I Sitsfx Agzok Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor Iedpfx Aoxb Edujgzjik - Chip conveyor - Technical documentation

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories Isdpju R Syijfx Agzeik The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: good (used), Underfloor pull circular saw, crosscut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw Iiedpepyk Nisfx Agzsk -Manufacturer: Rapid, table saw saw unit can be swiveled 45°, on a mobile base frame -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 260 mm, (max. Ø 300 mm) -Max. Cutting height 75 mm (max. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Dimensions 930/855/H1420 mm -Weight: 182 kg