Used Bench Drilling Machine for sale (66,769)

Condition: good (used), Year of construction: 1995, Control system: Heidenhain TNC 415 Spindle diameter: 130 mm Travel in X-axis: 3500 mm Travel in Y-axis: 2000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 700 mm B-axis: 0.001° Rapid traverse rate: 10 m/min Itjdpozff A Ejfx Abvsh Table size: 1800 x 1600 mm Table load capacity: 12 tons Spindle power: 37 kW Spindle speed: 2000 rpm (2-speed gearbox) Chip conveyor

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings Ijdpfx Abew Rhk Rjvjth - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: new, 18 mm M 12 M 14 Isdpfxjyv Nddj Abvoth MK 2 225-4.300 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm weight 120 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection Option 12 - LED machine light, with radially adjustable light beam, power rating 230 V, protection class IP 65

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg Iedpfeu Id D Uex Abvjth dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm Ijdpfx Aeu Id Dzjbvsth throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available Isdpju N E Evefx Abveth *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: Isdsvc Aytopfx Abvoth - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now Ijdpfx Abeda Nqxevoth

Condition: used, bore capacity in steel (diameter) 23 mm Isdpoyfwunofx Abvoth throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: used, bore capacity in steel (diameter) / mm Itjdpfxjy Tbv Te Abvsh throat / mm bore stroke 70 mm total power requirement 0,9 kW

Condition: used, Year of construction: 2000, number of spindles / bore capacity in steel (diameter) / mm bore stroke / mm Ijdjy S Dm Sspfx Abvsth BD13M – 5-Spindle Gang Drill / Bench Drill

Condition: used, Year of construction: 1976, machine/vehicle number: 5591, bore capacity in steel (diameter):13 mm throat:185 mm bore stroke:70 mm taper MK:Bohrfutter 1 - 13 mm turning speed range:400 - 4000 U/min speed steps work spindle:6 table surface area:200 x 250 mm distance spindle /table:170 mm Iedpfx Ajcxxvbebveth column diameter:65 mm total power requirement:0,22 kW weight of the machine ca.:0,08 t dimensions of the machine ca.:0,75 x 0,3 x 0,65 m

Condition: used, bore capacity in steel (diameter):10 mm throat:190 mm bore stroke:65 mm total power requirement:0,5 kW weight of the machine ca.:0,05 t dimensions of the machine ca.:0,3 x 0,7 x 0,7 m column diameter:80 mm machined bearing plate::Ja table surface area:300 x 250 mm height adjustment:0 - 280 mm Ijdpfx Ash Ra Nxjbvjth speeds:950 - 2000 U/min

Condition: used, bore capacity in steel (diameter):5 mm throat:100 mm bore stroke:30 mm voltage:220/380 V turning speeds:2820 U/min clamping table:170 x 120 mm workpiece height max.:120 mm total power requirement:200 W weight of the machine ca.:35 kg Itjdpfx Abscxxmlovjh dimensions of the machine ca.:0,25 x 0,43 x 0,5 m

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors Itodpjy R N Ilefx Abvsh * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor

Condition: used, spindle taper 750 W // 400 V // 50 Hz Boring power 25 mm connected load MK 2 Itsdpfx Abjt Rmbyovoh

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm Iodpfevh Nbbex Abvsth throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Isdpfx Aboc I Tzvovjth Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: used, Bench drilling machine, Table Drill Press GILLARDON Type GT 16 Serial No. Year of manufacture approx. 1985 Drilling capacity 16 mm Spindle taper MK 2 Spindle speed 300 to 3000 rpm Throat depth 250 mm Quill stroke 140 mm Itjdpfx Aoy N Duwobvoh Table size 400 x 400 mm Table height 850 mm Distance spindle – table plate max. 680 mm Column diameter 105 mm Motor power 0.75 kW Power supply 380 Volt, 50 Hz - Spindle speed via variator belt drive and 2 V-belt stages - Drill head height adjustment via hand crank approx. 430 mm - Lighting unit - Cabinet base with door - Quick-action drill chuck 1 to 16 mm Space requirement L x W x H 900 x 550 x 1650/2080 mm Weight 250 kg Very good condition

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 Iedpfx Abjuhhzhjvsth table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Year of construction: 1970, condition: good (used), Type / Model: BST 13 machine number: 37749 drilling capacity: 13 mm spindle mount: MK 2 Speed range: 475 to 2,400 rpm Projection: 190 mm Table: 230 x 220 mm clamping surface: 165 x 170 mm height adjustment: 300 mm stroke: 100 mm Itodpsfir T Usfx Abveh Total connection: 0,45 kW Accessories/equipment: Multi-spindle drilling head ( 4-fold ) verm. Sigloch & Schrieder condition: good Footprint: 220 x 400 mm Weight: 80 kg Dimensions: 220 x 400 x 820 mm

Condition: used, Bench drill, bench drilling machine GILLARDON Type GT 16 Serial No. 0160162 Drilling capacity: 16 mm Spindle taper: MT 2 Spindle speed: approx. 200 to 2200 rpm Throat depth: 250 mm Quill stroke: 140 mm Table size: 425 x 400 mm Drill table height: 900 mm Distance spindle - table plate: max. 600 mm Itodpfx Abjyz Dryovjh Column diameter: 105 mm Motor power: 0.5 / 0.75 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds and 4 V-belt steps - Drill head height adjustment via handwheel approx. 400 mm (column lowers through the table plate) - Table base with solid 40 mm laminated wood panel L x W x H = 650 x 900 x 800 mm - Quick-action drill chuck 1 to 13 mm Required space L x W x H 900 x 650 x 2000 mm Weight of drill: 176 kg Weight with table base: approx. 225 kg In good condition

Year of construction: 1985, condition: good (used), Bench drill TB 15 spindle speed 360 - 3600 rpm via V-belt pulley Itjdpfxok D Hrdo Abveh spindle mounting MK 2 with intermediate table Strohm 400 Volt

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Itodpfxotpgcns Abveh Misc accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW Itsdpfx Aefnbgqsbvoh space needed: 470 x 250 x 520 mm weight: 39 kg