Drill press machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Column drilling machine drill press Flott SBM3 SB23

Essen, GermanyGermany dealership location
6397 km
1987
excellent (used)
Vertical drilling machine afloat in very good condition from a training workshop. 9acc2bksg Speed control of belt apportionment 5 speeds Tool holder MK2 Table of rack height adjustable more
6
UniPress grass for pot hinge drilling and injection is in good condition Weight 95 kg Year of manufacture approx. 1993 Attacks left and right Mobile base operating instructions the machine is in good condition, ready to use. 88gx07b2c Location: 54634 Bitburg's stock changes, errors, prior sale reserved. more
4
Vertical drilling of fittings Drilling dimension settings using spindle Pneum. Feed (Druckanlschuss of MAX 7 bar) Speed 2800 RPM. 400 V Weight approx. 40 kg (without table) Processing of furniture hinges Processing by anchor plates Drilling system holes Bapeyx89nz Processing of cruciform mounting plates Processing of combination attacks including table and accessories more
5
M.Nr. 99025722 BJ. 1999 Weight approx. 45 kg 380 V - 50 Hz - 3 A Pneumatic connection - max.6 bar Nch0vfhew 2 extensions a. approx. length: 1900 mm with 5 fold-out stops and adjusting length of 2300 mm more
6
Würth 8trzzy8dc Hardware drilling machine drilling and inserting machine Type Prebomat 2 Technical data: Type Prebomat 2 incl. fence rails, left and right incl. Beschlagbohrkopf + 3 spindle-Reihenbohrkopf Operating instructions A VAT invoice is created for you. more
6
Alzmetall AB3ESV Tool holder MK3 automatic feed with 3 speeds 2 drive stages, 2 pole motor and infinitely variable speed control Optional coolant system Tachometer speed: 65-1.750 U/Min Max distance from the spindle to the foot: xx mm Bb03olwr0k Projection up to Center spindle: xx mm Machine height 200 cm more
6
Grundplattengetriebe-3 spindle table dimension B-730 mm T-450 mm travel in depth 170 mm material thickness 15-40 mm 13 mm drilling depth Max Bohrenutzlaenge 20 mm shank diameter of the drill bit 10 mm compressed air 6 bar insertion force at 6 bar pressure approx. 280 kg engine power 1 .1kw Weight 125 kg Complete with Base cabinet and attacks 2 different fittings heads grass and Hettich Good condition Si8rcaze9 Location: Off the shelf 54634 Bitburg more
1
University Press grass for pot hinge drilling and injection is ready for use in good condition. Weight approx. 40 kg Built in approximately 1996 The machine is in good condition, ready to use. Msy79 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbu28hgq3m CHMER CM H32Z EDM Hole Drilling Machine -- Cross travel 9.8". -- Z-Axis servo travel 13.38". -- Backslide travel 7.9". -- Electrode diameters available 0.0080" - 0.236". -- Max height of workpiece 13.8". -- Dielectric reservoir capacity 6.3 Gal. -- Wire guide 0.040". -- Dimensions 35.4" X 4.43" X 89". -- Weight 1,763 Lbs. Equipped with: -- Programmable control. -- X-Y-Z-Axis built in DRO system. -- High precision glass scales. -- Aut... more


drill pres...
daily

New machines via email!

Stay updated!
1

Gang POLLARD 150A/4/6 4 Spindle Drilling Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Ehdyxnf more
5
Drilling machine, drilling machine, vertical drilling machine, drilling machines, column drilling machine Spindle mount MT 3 Ut3efnyr9 Transmission Drilling machine with drill automatic rapid traverse Tapping automatic Table size 450 x 360 mm Unloaded 285 mm Spindle stroke 150 mm Speed 180-2000 R/min -Vorschub 0.08 0.32 mm / Rev Dimensions 900/1000/H2100 mm Weight 840 kg more
1

Drilling machines IBARMIA Spain SX 32

Babberich, NetherlandsNetherlands dealership location
6320 km
1996
ready for operation (used)
Technical data Ausladung400 x 420 mm Bohrleistung32 mm Drilling capacity in steel Ø32 mm Drilling capacity in casting Ø35 mm Thread cutter M18 Spindle retainer Mk3 Jcc3ban Spindle diameter Ø125 mm Spindelhub150 mm Maximum dista... more
6
bore capacity in steel (diameter) 40/50 mm 388ieroka arm length 635 - 1230 mm workpiece height max. 707 mm spindle taper MK 4 threading M 28 / M 32 spindle stroke 200 mm table-size 1300 x 710 mm feeds 9, von 0,08-1,25 mm/U spindle turning speed range 12, von 56-1120 U/min distance table-spindle nose min./max. 157 / 707 mm Drive 4 / 3,4 kW Machine height max. 2765 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2,1 x 1,5 x 2,76/3,3 m Condition: ready for operation Condition... more
3
The 115 PB pressure blasting system is with their efficient pressure blast system especially suitable for work, where a high removal rate is essential. Using the optional rotary tables, heavy workpieces can be easily machined. As exclusive representation by mhklbblog in the area of Baden-Württemberg we offer type pressure blasting 115 PB as a demonstration machine IS accessories GmbH from our showroom. -«mhklbblog» pressure blast system -Pressure Jet system with 25 l tank -High performan... more
8
Drilling depth 500mm max Cap.3-16mm Spindlenose MT2 MK2 340-600-980-1600 RPM Spindel can tilt 15°up and down Hightadjustment 235mm Tabledimensions 650x410 Table can turn 360° Coolant pump G7rnrcx DRO on 1 axe Tableadjustment 400mm Automatic powerfeed with peckcycle more
5
Bechlagbohrmaschine, line boring machine Plate 2200 mm -Mobil Bzsjwxz -verstellbare attacks Dimensions 2300/600/H1350 mm Weight 240 kg more
3

Suction machines & filters HSM Absaugung mit Ballenpresse VK 12/600

Murr, GermanyGermany dealership location
6656 km
ready for operation (used)
Technical data: HSM extraction with baler UK 12/600 Pressure: 16 tons Hj3lkmoxk more
5
bore capacity in steel (diameter) 20 / 25 mm throat 285 mm bore stroke 140 mm spindle taper MT 2 MK column diameter 105 mm spindle turning speed - stepless 60-1400 U/min Drive 0,55 / 1 kW distance spindle/base plate 245 - 675 mm base plate 400 x 425 mm distance between table/spindle 145 - 465 mm weight of the machine ca. 300 kg range L-W-H 1 x 0,8 x 2 m Electric 380 Volt Base Kkvnk8tr intermediate table 430 x 380 mm Stepless turning speed regulation Machine dealer with own stock of 25... more
6
Tool holder MK 4 Stepless speed adjustment Bbouydkiqa Tachometer Automatic feed in 3 speeds more
2
bore capacity in steel (diameter) 25 mm arm length 300 / 800 mm workpiece height max. 1000 mm distance table - lower edge spindle 125 / 1000 mm spindle turning speed range 63 - 1600 U/min feeds 0,125 - 0,2 - 0,315 mm/U max. torque on the spindle max. 90 Nm column diameter 180 mm spindle taper MT 3 quill stroke 250 mm base plate surface area 800 x 630 mm crossrail adjustment vertical 625 mm 3cw2jjlkw bore head horizontal movement 500 mm boring head swiweling right/left 90 ° total power requirem... more
9
Slot boring machine with dowel device from the company of p type 116 very good condition, as new, comes from a master school can be milled slots and holes drilled 380V, 1500W, 2860U/min Clockwise with chassis Mills, bores very good and clean, runs around and has no impact Wwmhw everything works fine the machine is delivered by us personally throughout Germany for 100,00 euro and presented, thus have no risk at the time of purchase, the delivery is also possible on request in Austria and... more
5
Bending tool, die, Oberrmesser, upper tool, upper cheek, Ev9lksp Tool for bending machines Dimensions 90 x 25 mm Length 1630 mm Weight 20 kg more
7
Csepel 12 UH 1600 radial drilling machine type 12 UH 1600 Drilling capacity 65 mm Mount Mt 5 Throat depth 1600 mm Quill stroke 315 mm Nffll Speeds 16-1600 rpm including tilting table 1000 x 750 mm item condition: used The dismantling and transportation must be by the buyer in Hanau more
4
Tool holder MK 4 Projection up to 1000 mm Bcrqdcij0p Car. Feed Motor-driven height adjustment more
3

Radial Drilling Machine WMW BR 40 x 1250/1

Bühl, GermanyGermany dealership location
6593 km
1969
used
bore capacity in steel (diameter) 40 mm thread dia. 36 mm inch 1 1/2 Zoll column distance -mid boreslide 300 - 1250 mm distance spindle/base plate 375 - 1375 mm swivel range of the arm 360 ° E87ho07 base plate surface area 1370 x 900 mm spindle taper MT 5 spindle stroke - max. 355 mm spindle speed: 20 - 1200 U/min. spindle feeds: 0,063 - 0,63 mm/U total power requirement 4,1 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,05 x 0,93 x 3,20 m acc.: coolant more
3

Pillar Drilling Machine ERLO TCA40

Dreieich, GermanyGermany dealership location
6568 km
1986
used
bore capacity in steel (diameter) 40 mm throat 360 mm bore stroke 240 mm spindle taper MT 4 table-size 560 x 480 mm spindle turning speed range 68 - 1270 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V total power requirement 1,6 kW Yriayk weight of the machine ca. 730 kg dimensions of the machine ca. 1,00 x 0,95 x 1,42 m - [...] / 186 - autom. feed - coolant equipment - machine lamp more
4
Bending tool, die, bottom blade, lower, lower beam, Tool for bending machines Cf3oc9gq -Verbreiterung for lower beam Dimensions 59 x 19 mm Length 1452 mm Weight 10 kg more
15
sold is a used, very well, fully functioning Optimum pillar drill machine bench drill machine Nfhaf Opti B23 Pro with MK 2 spindle holder including a used machine vice and a HSS drill set Optimum stand drill OPTI B 23 PRO is a robust table and column drilling machine with V-belt drive ideal for use in the workshop and repair shop or for the hobby and professional home improvement 400 Volt model - additionally with right-left rotation! Precise work table with diagonal T-slots Work ta... more
6

Deep Hole Drilling Machine - special SIG BEM 82/05

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1984
used
Boring depth max. 500/475 mm 2raeua bore spindle drive 3000 feed 20 - 400 mm/min lease refer to the pictures for further technical details. more
3

CAR workshop machines Vulkanisierpresse FAIP HPA Modell: SP54, neu/ungebraucht

St. Peter in der Au, AustriaAustria dealership location
7051 km
ready for operation (used)
400 €
Offer
Another 1 days
Vulcanizing FAIP HPA model: SP54, new/unused in original box Gvn9ag more
1
bore capacity in steel (diameter) 25 (St 60) mm throat 280 mm Cktegam73 bore stroke - mm table-size 500 x 400 mm thread capacity M 22/St. 60, M 27/GG 20 spindle taper MT 3 bore slide stroke 500 mm turning speed range 160 - 1850 U/min feeds 35,5 - 71 mm/min rapid traverse 4,5 m/min distance spindle /table 185/685 mm total power requirement 2,9 kW weight of the machine ca. 0,6 t range L-W-H 1,10 x 1,70 x 2,25 m acc.: 2- drilling head, 2 pcs. 3-jaw chuck, coolant more
5

Pillar Drilling Machine IBARMIA B40

Dreieich, GermanyGermany dealership location
6568 km
1998
used
bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 table-size 560 x 480 mm spindle turning speed range 61 - 1169 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V total power requirement 2,4 kW weight of the machine ca. 620 kg dimensions of the machine ca. 0,60 x 1,10 x 2,37 m threading device - [...]: 669 V - thread cutting device 8pl3hmyrw - automatic feed - rapid clamping boring chuck ROEHM Ø 1-13 mm - coolant equipment - ma... more
5
Bending tool, die, upper blade, upper tool, upper cheek Tool for bending machines -Spitzes tool dimensions 16 x 73 mm Length 1250 mm Weight 10 kg Hictqvmrs more
5

Rows and dowel hole drilling machine Maggi Gematec 23

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1999
good (used)
Rows And Dowel Hole Drilling Maggi Type: Gematec 23 used machine drilling unit swiveled / pneumatic 23 drill spacing: 32mm drive system power consumption: 2,2 kW Gwxul9zxm Year of construction: 1999 location: Warehouse / 82281 Herrnzell more
8
Open side coordinates drill; Manufacturer WMW Mikromat Dresden, model: BKoE 315 x 500; Specifications: table size 315 x 500 mm, maximum load 100 kg, adjustment speed 52/160/400/1000 mm / min; Drill feeds up / down 0.006/0.025/0.055/0.22 mm / Rev; Friction feed up / down 0.5 mm/Rev; Spindle stroke 100 mm core diameter 80 mm tool holder MK 3. Speed range with 19 steps (45-2,800 RPM); Workspace table: longitudinal adjustment 400 mm, lateral adjustment 250 mm; height adjustment spindle stock 360 mm... more
2

Radial Drilling Machine KOLB HKH

Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
bore capacity in steel (diameter):60 mm arm length:2000 mm workpiece height max.:1600 mm spindle turning speed range:28 - 950 U/min feeds:0,07 - 2,9 mm/U spindle taper MT:5 total power requirement:13 kW weight of the machine ca.:6 t dimensions of the machine ca.:3,2 x 1,6 x 3,4 m Gcm7pv0x8 - boring cube 800 x 600 x 600 mm - central clamping more
6
bore capacity in steel (diameter) 40, St 60 mm arm length 750 mm workpiece height max. 705 mm tool taper SK40 z-axis 200 mm w-axis 410 mm distance spindle nose and table 95 - 705 mm rapid traverse X/Z/Y 7,5 / 5 / 7,5 m/min. Msajc0r7 spindle turning speed range 15-2.800 U/min table dimensions (lengthxwidth) 600 x 1200 mm weight of the machine ca. ca. 3 t with 3 tables more
3

Bench Drilling Machine FLOTT TB 15 GL Digi

Bünde, GermanyGermany dealership location
6460 km
1990
used
bore capacity in steel (diameter) 16 mm throat 200 mm bore stroke 80 mm speeds 6 / 160 - 1600 U/min spindle taper MK 2 column diameter 70 mm table-size 280 x 200 mm total power requirement 0,55 kW weight of the machine ca. 140 kg dimensions of the machine ca. 0,32 x 0,68 x 1,56 m Yyhophvj Digital readout Hub der Spindel Speed change via V-belt disc Electric drill on stand with digital display for the spindle stroke. The machine was originally a drilling and tapping machine. The thread cy... more
5
Working width 2000 mm -Damping and vacuum station Pressing table -automatatische task station Sq9wns more
4

rows and dowel hole drilling machine Scheer DB150

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1996
ready for operation (used)
Type: DB150 used machine drilling unit swiveled Bbyqufcix7 21 drill spacing: 32mm wide accessory drive system power consumption: 2,2 kW Year of construction: 1996 location: Warehouse / 82281 Herrnzell more
3

Drilling Machine Ryazan PT 403

Kaiserslautern, GermanyGermany
6535 km
1976
excellent (used)
OVERVIEW: Brand: Ryazan Model: PT 403 Application type: Drilling Machine type: Drilling Machine Construction year: 1976 Production hours: 9000 Location: Lithuania Origin country: Russia GENERAL DATA: Measurements width: 143000 mm Measurements depth: 25000 mm Measurements height: 15500 mm Machine weight: 23500 kg MAIN DRIVE: Spindle speed range: 2-100 1/min Nfa7p CONTROL UNIT: Brand: Ryazan MOVEMENT: X-AXIS movement: 3880 mm Y-AXIS movement: 245 mm WORKPIECE: Wor... more
1

Upright Drilling Machine OPTIMUM 508 VS 20

Mönchengladbach, GermanyGermany dealership location
6371 km
1995
used
bore capacity in steel (diameter):20 mm O2fc2kk throat:210 mm bore stroke:150 mm spindle turning speed range:120 - 1600 U/min table:400 x 450 mm feeds:0,1 - 0,3 mm/U total power requirement:1,4 kW weight of the machine ca.:0,2 t dimensions of the machine ca.:1,0 x 0,8 x 1,8 m more
8
Deep hole drilling machine Manufacturer: Gildemeister + Knoll Type: B2B-2000 Year of construction: 1977 Overhaul in 2002 Bcrildwbap Drilling Center about flat track: 315 mm Swing over bed: 630 mm Drilling: 15-60 mm Core drilling: 85 mm Drilling: 174 mm Drilling depth: 2.000 mm Bed length: 7.000 mm Bed width: 403 mm Power: 22 kw Spindle head: Size 11 Inner bevel: 1:20 D = 109 x 120 mm Spindle bore: D = 103 mm incl. cooling plant Weight: approx. 6,000 kg Space requirements: a... more
1

Drilling machine Knuth R 40

Schwäbisch Gmünd , GermanyGermany
6698 km
good (used)
Drilling machine fully functional Knuth R40. Nfcpf more
5
-with 8 spindles pneumatic workpiece clamping Power 1,1 KW Speed 2800 1/min Operating pressure 6 bar Qk9dbue7v Weight 90 kg more
6
-Accessories available. Coordinate table KS 300 Procedures: X away 320 mm Y away 250 mm Clamping area 640 x 300 mm Drilling capacity in steel 18 mm Tapping up to 16 M stroke of spindle 110 mm Spindle speeds of 135 - 4'500 rpm Power of spindle motor 0.45/1,1 KW Weight approx. 650 kg with coordinate table & base Nfbrf more
5

Drilling Machine WOTAN B-105-S

Kaiserslautern, GermanyGermany
6535 km
1974
excellent (used)
OVERVIEW: Brand: WOTAN Model: B-105-S Application type: Drilling Bcp73eekr9 Machine type: Drilling Machine Construction year: 1974 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 4650 mm Measurements depth: 3900 mm Machine weight: 11500 kg MAIN DRIVE: Spindle speed range: 9-1000 1/min CONTROL UNIT: Brand: Heidenhain MOVEMENT: Rapid Traverse: 2,6 m/min WORKPIECE: Drill spindle drm: 105 mm Spindle sleeve stroke: 700 mm Vertical adjustm... more


drill pres...
daily

New machines via email!

Stay updated!

to

to

Edit search
DRILL PRESS MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close