Used Drill Grinding Machine for sale (65,513)

Condition: like new (used), Year of construction: 2022, operating hours: 40 h, functionality: fully functional, total height: 2,200 mm, total width: 1,600 mm, total length: 3,700 mm, type of input current: three-phase, overall weight: 12,000 kg, input voltage: 480 V, input frequency: 60 Hz, grinding spindle motor power: 22,000 W, space requirement height: 2,200 mm, spindle speed (max.): 2,406 rpm, Very Low Hours, Hardly Ever Used- Specifications: Workpiece diameter: max. 100 mm (3.94") Workpiece diameter: min. 2 mm (.08") Workpiece length with plunge grinding: max. 195 mm (7.68") Grinding wheel diameter: max. 500 mm (19.69") Grinding wheel diameter: min. 380 mm (14.96") Maximum wear of the grinding wheel - Straight plunge cut: 60 mm in radius (2.36") - Inclined plunge cut: 25 mm in radius (0.98") Width: max. 200 mm (7.87") Bore: 305 mm (12") Circumferential speed of the Grinding wheel standard: max. 63 m/s Regulating wheel diameter: max. 300 mm (11.81") Width: max. 200 mm (7.87") Bore: 203 mm (7.99")Grinding wheel drive power standard: 22 kW Unit: Metric - Provision of the grinding wheel and regulating wheel unit: X1/X2 axis - Infeed axis of the grinding wheel dressing tool: Z1 axis - Longitudinal feed of the regulating wheel dresser: W2 axis - Speed control of the grinding wheels: SP1 spindle - Speed control of the regulating wheel: SP2 spindle 3 operating modes: - Set-up - Grinding in single operating mode (only with plunge grinding) - Automatic grinding - cycle operating mode Noise emission at the machine: Automatic loading - Basic machine: approx. 12,000 kg (approx. 26,455 lbs.) - Dimensions of the basic machine (without control cabinet) Length: 3,700 mm (146") Width: 1,600 mm (63") Height: 2,200 mm (87") Equipped with: Grinding Wheel Balancing System, Regulating Spindle Swivelling, Height Adjustment of Work Rest Holder-NC axes, Bodpfs Agptyex Anpoww Auxiliary for Grinding Wheel Exchange, Second Operating Panel, Loading Unit, Loading System for Manual Loading, Unloading System with Integrated Measuring Unit, Workpiece Dependent Accessories, Compact Filter Unit

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Bwedpoz H Iwfsfx Anpew Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW Bedsmnntmspfx Anpoww - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: good (used), Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine, grinding machine, angle grinder, thread drill grinding machine, bench grinder -Manufacturer: Affilatrici, drill and tool grinding machine type 3M 4/60 -Grinding wheels: installed Ø 180 mm, see photos Bedpfx Anozrfrtepsww -Motor power: 1.5 kW -Speed: 2800 rpm -Chuck: Ø 160 mm / Bore Ø 60 mm -Accessories: Centering MK1, 2, 4.5 -Coolant system: -Dimensions: 1080/945/H1300 mm -Weight: 370 kg

Condition: ready for operation (used), Erhardt & Spiess ES 175 drill grinding machine Grinding machine You are welcome to visit us for an inspection. We will be happy to arrange cost-effective transportation for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Bjdpfx Aju Hhtqsnpjww Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm drilling length ca 165 mm lip angle 90-140 ° Bodsztfzwopfx Anpsww

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t max. workpiece length: 300mm accessories: 
Wet grinding device
 surface planer device Bsdpfx Ajg Rw Ntsnpjww machine light
 pneumatic workpiece clamping

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m Bwjdpfx Anoupxkwopsw

Condition: new, grinding range 8 - 32 mm Bedpfx Anjupxh Nopeww sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: good (used), Year of construction: 1983, Stock number: 2965-3 Manufacturer: WEDEVAG Year of manufacture: 1983 Machine number: 000115/83 Bwjdpfx Anov U Agkspjw Type / Model: WL 2 Grinding wheels: 203 x 10 x 32 mm Point angle: 60 to 180° Diameter: 2.5 to 20 mm Speed: 2,800 rpm Dirty air requirement: approx. 5 bar Equipment: Base cabinet with extraction system Extraction system: SKF Tools Type: ADT 12 Floor area: 500 x 600 mm Table height: 500 mm Accessories/equipment: Condition: Good Complete weight: 170 kg Dimensions: 500 x 600 x 1,400 mm

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) Bwedpfxjnzt A Hs Anpsw - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: good (used), Year of construction: 1988, functionality: fully functional, 1 x Drill bit grinding machine Wedevag WL 2 Year of manufacture: 1988 with integrated dust extraction DCE Type: ADT 12 Bwjdpfsz Agdxex Anpew Technical data: Working range: 2.5 - 20 mm Grinding wheel dimensions: 203 x 10 x 32 mm Point angle: 60 to 180° Rotational speed: 2,800 rpm Accessories: 13 x Clamping head 1 x Operating manual in German The machine can be inspected while powered on.

Condition: used, Year of construction: 1997, functionality: fully functional, Data Sheet – Meteor MM 10-US Description: Grinding center for small tools and micro-tools. Model: Meteor MM 10-US Applications: Sharpening of right-handed and left-handed precision tools Sharpening of drill bits (diameter 0.2 - 12 mm) Production of various engraving tools Sharpening of boring tools, single- and multi-flute cutters and radius cutters Technical specifications: Sharpening range: 1-12 mm for tools with collet; 0.3-10 mm for drills with chuck and collets Grinding spindle: axially adjustable Side stops: with fine adjustment AC motor: 120 W Electrodynamic braking system Integrated electronic board Dustproof control panel Machine lighting: 24 V halogen lamp Grinding wheel: Carborundum K 250 Grinding wheel dressing device Dust protection cover Additional specifications: Colour: Green-grey Power supply: 230 V / 50 Hz Bedpfx Ansvyzfvjpsww Safety compliance: CE / STR standards tested

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! Bwjdpfou Ng Hnox Anpsw *

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Work Table Table dimensions: 1,100 x 260 mm Number of T-slots: 3 Travel Ranges Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Spindle Speed range: 1,000–5,000 min⁻¹ MACHINE DETAILS General Manufacturer: Dormac Type: FU90 Machine number: 537 Year of manufacture: 1987 Electrical Connection Operating voltage: 380 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 1,000 kg Bodpe Ad Aqnsfx Anpjww EQUIPMENT 3-axis digital display ACU-RITE

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm Bwsdpfoyxy S Rsx Anpew - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad Bedpfx Ajvn U Adenpjww clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Bsdj Aa Ai Ajpfx Anpsww Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Bedpfx Anou Ngxdopoww Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale Bsdpjzvnnfsfx Anpsww PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Condition: used, functionality: fully functional, 1 x drill grinding machine Darex Bwedpfxjyvhg Re Anpjw M 5 with 2 x chucks The machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Alzmetall Type: AC 32 Bjdpo Adzy Uefx Anpsww Year of manufacture: 2011 Machine number: PRJ044839 Machine type: Bench drill ELECTRICAL DATA Operating voltage: 3 × 400 V Frequency: 50 Hz Rated current: 20 A SPINDLE Speed range: 55–5,000 min⁻¹ WORK TABLE Table dimensions: 510 × 420 mm Table slots: 5 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 2,200 mm Weight: 500 kg EQUIPMENT Digital display

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! Beds Ahrhijpfx Anpeww Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors in technical data and prior sale reserved.

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder Bwjdpfxozxt Hfj Anpew - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine type: Surface grinder Manufacturer: Gematec Bjdo Ad Itzopfx Anpsww MACHINE DETAILS Length: 3,000 mm Width: 2,000 mm Height: 2,000 mm Weight: 2,000 kg