Drill grinding machine

WEDEVAG WL 2

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h Ndedpfx Afsw Nqu Aouob The machine can be inspected in 71384 Weinstadt near Stuttgart.

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Nodpfx Afogi Dl Nousdb Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: used, Year of construction: 2012, controller manufacturer: Mitsubishi, controller model: M70, _____ Description: Year of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm Mainspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):60,8 Nm Barcapacity:42 mm C-Axis:0,001° Workpiececlamping:Collet chuck, Type 173E Subspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):5,5 kW Torque (max.):38,7 Nm C-Axis:0,001° Workpiececlamping:Collet chuck Movement in X/Z:140/310 mm Rapid travers in X/Z:12 m/min Toolcarrier (X/Y/Z): Technology:Turret with 8 stations Tooldrive:5.000 rpm Movement in X/Y/Z:140/70/235 mm Rapid travers in X/Y/Z:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Rawmaterialfeed:Bar laoder, IEMCA Master 80 HF Finishpart removal:Part catcher with conveyorbelt Fire-extinguishing unit:Kraft + Bauer Nedpfx Aeztifmjfuodb Further Equipment:Trafo

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Nodpsviuzcsfx Afuedb

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Nodpfx Afetqfq Uoujdb

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Ndedpjg S Tx Iofx Afuob

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: Ndodpfx Afjx Utc Ioujb 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use Nodpfx Afsw Nq Ameujdb - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: good (used), Year of construction: 2000, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T 63504, year of manufacture 2000, FANUC control, chip conveyor, together with bar loader TORNOS Robobar MSF 832, No. C-15040, year of manufacture 2000 Ndodsunvv Ispfx Afusb

Condition: used, Year of construction: 2017, operating hours: 21,752 h, functionality: fully functional, turning length: 100 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 3,000 kg, Max. work length: 100 mm Max. machining diameter of bar work SP1: 42 mm Max. machining diameter of bar work SP2: 34 mm Turret slide stroke X1 axis: 140 mm Ndedpfx Aox Ig Ikefueb Z1 axis: 235 mm Z2 axis: 310 mm Number of spindles: 2 Spindle speed range SP1: 60-6,000 rpm Spindle speed range SP2: 50-5,000 rpm Tool spindle speed range: 50-5,000 rpm Number of driven tools: max. 8 Spindle drive SP1: 11/7.5 kW Spindle drive SP2: 5.5/3.7 kW Power supply capacity: 28 kVA Fuse: 81A Bar feeder: SN542-3.2 m Quick tech Year of manufacture: 2017 Serial no.: 1438