Used drill grinding machines for sale (59)

Condition: excellent (used), functionality: fully functional, Working diameter: 2–40 mm. Minimum and maximum point angles: 40–180°. For right- and left-side cutting tools, 1–12 cutting edges. For sharpening twist drills, step drills and tap drills. A wide range of accessories and a user manual for the machine are included. Lrsdpfx Akey Hb T Eoqsk Clean and good condition

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Ljdpfonccx Hjx Akqork

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm Ljdpfexablxsx Akqsrk - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Year of construction: 2012, machine/vehicle number: 22002549, Offer 26118 Technical Specifications: - Possible working range with options: 0.3 - 30 mm - Max. disc diameter: 164 mm - Point angle steplessly adjustable: 118 - 150° - Surface speed at the disc: 29 m/s - Rotational speed: 2800 rpm - Drive: 230 V / 0.2 kW - Required space approx.: W 450 x H 300 x D 450 mm - Weight approx.: 30 kg - Clamping range: 3.0 - 12 mm Lodpfey Dfqisx Akqork - Clamping range: 12 - 21 mm - Grinding attachment for 3-flute countersinks - Cross table

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Lrsdpfxsx Ea Nms Akqek Point angle: 90 - 140° Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 264237J, total width: 350 mm, total length: 450 mm, total height: 350 mm, overall weight: 70 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time between 04/05/26 and 07/05/26. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 450 x 350 x 350 mm Ledpfxoyr Huks Akqsrk Weight: 70 kg External reference: 31

Condition: good (used), Grinding diameter 3-40mm Lrodpfxegy Ti Dj Akqok Length of drill unlimited Point angle 40-180mm Point thinning device Dressing attachment MARCELS MASCHINEN CH

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 256824, input voltage: 230 V, rotational speed (max.): 3,450 rpm, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 2,800/3,450 rpm MACHINE DETAILS Operating voltage: 230 V Lredpfx Ajynh I Dokqsk Rated current: 1.6 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 1,200 mm Weight: 70 kg EQUIPMENT With chuck for drills: 1.5–6.3 mm / 6.3–16 mm / 16–26 mm External reference: Lot 6/ Dommel

Condition: good (used), Please refer to the images for all technical specifications. Lodsym Aptjpfx Akqork

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Lodpfxjyl Idae Akqerk Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: used, functionality: fully functional, 1 x drill grinding machine Lsdpfx Aeyvhg Rskqsrk Darex M 5 with 2 x chucks The machine can be inspected under power.

Condition: good (used), I sell centering grinder strodkowa, in bdb condition. Lrsdovbwvmopfx Akqok

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm Lrsdpfxou Ng Irs Akqok number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm Lsdju Ngxdepfx Akqsrk current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Lsdpfx Asu Ng Ncskqsrk Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 Lrodpfxjgd H U Uj Akqek - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Lrodpsviuzcsfx Akqek

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1566, type of input current: three-phase, rotational speed (min.): 1,500 rpm, overall weight: 850 kg, space requirement height: 1,400 mm, space requirement length: 1,200 mm, space requirement width: 850 mm, disc diameter: 225 mm, grinding wheel width: 50 mm, Grinding range 13 - 85 mm / Point angle 80° - 160° 6-jaw chuck Operating tools Emulsion tank 60 liters Extension sleeves Halogen lamp 230 volts Ledpfeym Tdhsx Akqork Complete operating manual

Condition: new, Year of construction: 2013, functionality: fully functional, This is a drill bit sharpening machine suitable for drill bits from 8 to 30 mm in diameter, with an adjustable point angle from 90° to 140°. Standard equipment includes a CBN grinding wheel for HSS drill bits (lasts for at least 3,000 drill bits). A diamond wheel is also available for carbide drill bits, offered at a price of €90.00. Sharpening a drill bit is completed in three steps. First, the drill bit is clamped in a fixture, followed by the sharpening and pointing processes. The entire procedure is finished in less than a minute! Before clamping the drill bit, the diameter is set on the grinding machine using a rotary dial. The drill bit is aligned and clamped with the appropriate collet in the fixture placed into the left-side mount of the machine. Sharpening the cutting edges and pointing is straightforward: switch on the machine, insert the fixture with the drill bit into the right-side mount, and gently rotate from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to sharpen the second cutting edge. Pointing is carried out in the same way, simply using the top mount. That’s it. Just switch off the machine and release the drill bit. A clever design combines an eccentric and a special grinding wheel, so there is no need to worry about the cutting edge shape or clearance angle. An additional advantage is that both cutting edges are produced with exactly the same settings, ensuring optimum edge symmetry. Furthermore, the point angle can be freely selected between 90° – 140° before sharpening. Lsdpeyn Riwofx Akqsrk High-precision collets for diameters of 8 to 30 mm guarantee concentric clamping. The grinding wheel has a lifetime of over 3,000 operations. In addition to the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drill bits. Changing the wheel can be done in seconds with just a few simple steps. The compact design of the drill bit sharpening machine and its practical carrying handle allow for easy mobile use. As nearly all essential accessories such as collets, fixtures, or hex keys are stored on the machine, everything needed is always on hand. The drill bit sharpening machine is energy-efficient and space-saving. Sharpen drill bits without prior knowledge – clean, fast, and effective. Shipping weight: 25 kg 23 collets (8 – 30 mm) Standard CBN grinding wheel Machine dimensions: 350 x 290 x 220 mm

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Lrodpfxemnntme Akqok Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: Lredpfxjd R A Dcs Akqsk - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Lrodpsu Ng Hnofx Akqjk Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: good (used), functionality: fully functional, DAREX SP 2500 - Spiral Drill Grinding Machine - Grinding capacity: 1.5 - 26 mm Lodpfxsygutde Akqjrk - 3 x tool holders - 1 x spare grinding wheel - Machine base - Documentation Dimensions (LxWxH): 0.5x0.5x1.6 m / Weight: 85 kg Subject to errors and omissions.

Condition: new, Technical data: Drill diameter: 3 - 32 mm Point angle: 90° - 140 Speed of grinding wheel: 4800 1/min Connection: 230 V Motor power: 0,25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Lrodoh Hyrbopfx Akqsk Features: - Ideal for grinding HSS/hard metal twist drills. - Easy operation - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device for perfect centering of the drill on the workpiece and to reduce the feed force during drilling - Device for relief grinding of the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 10 ER collets ER 3 -12 mm, 20 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - Collet holder ER 20 and ER 40

Condition: new, Technical data: Drill diameter: 3 - 20 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Lrodsh Hyqwjpfx Akqok Motor power: 0,12 kW weight, approx.: 8,6 kg Dimensions, approx.: 290 x 150 x 180 cm Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 14 - 20 mm - Collet holder ER 20, ER 25