Drill Grinding Machine

AVYAC 3 P 32

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Fedpfx Ajwzyd Ejh Uspp Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Year of construction: 1999, condition: good (used), machine/vehicle number: 112150, Table surface area: 300 x 500 mm Fpedpof Sainofx Ah Uop Travels x / y / z: 420/300/250 mm Spindle mount: BT 30 small / large Distance table / spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm / min Rapid traverse: x u. y / z 25/20 m / min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Required space: 2500 x 1500 x 1450 mm Weight: approx. 2800 kg

Condition: used, Year of construction: 2015, TAKISAWA LA250 year 2015 FANUC MANUAL GUIDE Max turning diameter (mm) 450 Max tuning length (mm) 765 Z-axis 800mm Spindle max 3500rpm Bar capacity (mm) 75 Chuck size (inch) 10" Turret 12 Positions Tool probe Parts Catcher with machine : -chip conveyor with coolant tank -Holders Fsdovxu Uzepfx Ah Uepp

Condition: used, Year of construction: 1963, Technical details: Fpodsu Ix Arspfx Ah Ujp turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine xH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm Fpedpsizlh Hefx Ah Uep spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: new, Year of construction: 2020, I - beam section - flat steel 80 x 15 (d600) mm I-beam section - upend 60 x 10 (d800) mm L-beam 45 x 5 (d600) mm bar material - diameter 35,0 (d700) mm tube diameter 60 x 2,0 (d1000) mm square material 45x45x3,0 mm total power requirement 2,25 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 780 x 950 x 1450 mm - higher speed 6.6m/min Fpsdpfx Ahsgvqvme Uop - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm

Condition: excellent (used), functionality: fully functional, 2 - Urban AKS 1200 head welding machine - Welding length max. 2500 mm Fodpfx Ajv Rmm Teh Uepp - Weld bead limit: 2 mm - Burn-off: 6 mm - Set of support arms

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad Fedjvn U Adjpfx Ah Uspp clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Fedpfot Hw R Dex Ah Ujpp Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: reconditioned (used), Modernized machines with the new LTG StoreControl L control system External dimensions: Height 6,000 mm Width 1,630 mm Depth 2,980 mm 30 beams, each with a payload of 500 kg with the clear usable dimensions: Fedpsn D A Rrefx Ah Uspp W = 1,300 mm D = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Start of the access opening at 870 mm above the top floor, then 845 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surface cleaned, signs of wear possible Performance values Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 volts More Extras: Hand-operated lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently primarily in Germany, Austria, and other neighboring countries.