Used Twist Drill Grinding Machine for sale (65,833)

Condition: like new (used), Year of construction: 2022, operating hours: 40 h, functionality: fully functional, total height: 2,200 mm, total width: 1,600 mm, total length: 3,700 mm, type of input current: three-phase, overall weight: 12,000 kg, input voltage: 480 V, input frequency: 60 Hz, grinding spindle motor power: 22,000 W, space requirement height: 2,200 mm, spindle speed (max.): 2,406 rpm, Very Low Hours, Hardly Ever Used- Specifications: Workpiece diameter: max. 100 mm (3.94") Workpiece diameter: min. 2 mm (.08") Workpiece length with plunge grinding: max. 195 mm (7.68") Grinding wheel diameter: max. 500 mm (19.69") Grinding wheel diameter: min. 380 mm (14.96") Maximum wear of the grinding wheel - Straight plunge cut: 60 mm in radius (2.36") - Inclined plunge cut: 25 mm in radius (0.98") Width: max. 200 mm (7.87") Bore: 305 mm (12") Circumferential speed of the Grinding wheel standard: max. 63 m/s Regulating wheel diameter: max. 300 mm (11.81") Width: max. 200 mm (7.87") Bore: 203 mm (7.99")Grinding wheel drive power standard: 22 kW Unit: Metric - Provision of the grinding wheel and regulating wheel unit: X1/X2 axis - Infeed axis of the grinding wheel dressing tool: Z1 axis - Longitudinal feed of the regulating wheel dresser: W2 axis - Speed control of the grinding wheels: SP1 spindle - Speed control of the regulating wheel: SP2 spindle 3 operating modes: Codpfx Ao Agptyoktsri - Set-up - Grinding in single operating mode (only with plunge grinding) - Automatic grinding - cycle operating mode Noise emission at the machine: Automatic loading - Basic machine: approx. 12,000 kg (approx. 26,455 lbs.) - Dimensions of the basic machine (without control cabinet) Length: 3,700 mm (146") Width: 1,600 mm (63") Height: 2,200 mm (87") Equipped with: Grinding Wheel Balancing System, Regulating Spindle Swivelling, Height Adjustment of Work Rest Holder-NC axes, Auxiliary for Grinding Wheel Exchange, Second Operating Panel, Loading Unit, Loading System for Manual Loading, Unloading System with Integrated Measuring Unit, Workpiece Dependent Accessories, Compact Filter Unit

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with Cjdpfx Akemnntmotori - clamping device - presetting device

Year of construction: 1987, condition: not inspected (used), Chuck for workpiece pickup is missing Csdehaqv Dopfx Aktsri

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 Crjdpfx Aog Rw Ntjktei small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t max. workpiece length: 300mm accessories: 
Wet grinding device
 surface planer device machine light
 pneumatic workpiece clamping

Condition: good (used), Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine, grinding machine, angle grinder, thread drill grinding machine, bench grinder -Manufacturer: Affilatrici, drill and tool grinding machine type 3M 4/60 -Grinding wheels: installed Ø 180 mm, see photos -Motor power: 1.5 kW Csdpfszrfrtsx Akteri -Speed: 2800 rpm -Chuck: Ø 160 mm / Bore Ø 60 mm -Accessories: Centering MK1, 2, 4.5 -Coolant system: -Dimensions: 1080/945/H1300 mm -Weight: 370 kg

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Csdpfx Aksz H Iwfjtori Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also Cedpfx Akeupxh Nstori suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg.

Condition: ready for operation (used), Erhardt & Spiess ES 175 drill grinding machine Grinding machine You are welcome to visit us for an inspection. We will be happy to arrange cost-effective transportation for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Cedpfx Aju Hhtqjkteri Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, grinding range 2 - 20 mm sharp cornered angle min./max. 90 - 135 Grad connected load 230 V Crjdpfx Ajupxkwsktji weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm drilling length ca 165 mm lip angle 90-140 ° Crsdeztfzwepfx Aktsi

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Codpfx Akonzt A Hsteri Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: good (used), Year of construction: 1983, Stock number: 2965-3 Manufacturer: WEDEVAG Year of manufacture: 1983 Machine number: 000115/83 Type / Model: WL 2 Grinding wheels: 203 x 10 x 32 mm Point angle: 60 to 180° Diameter: 2.5 to 20 mm Speed: 2,800 rpm Dirty air requirement: approx. 5 bar Equipment: Base cabinet with extraction system Extraction system: SKF Tools Type: ADT 12 Floor area: 500 x 600 mm Credpfx Aksv U Agketsi Table height: 500 mm Accessories/equipment: Condition: Good Complete weight: 170 kg Dimensions: 500 x 600 x 1,400 mm

Condition: used, Year of construction: 1997, functionality: fully functional, Data Sheet – Meteor MM 10-US Description: Cedpsvyzfvefx Aktori Grinding center for small tools and micro-tools. Model: Meteor MM 10-US Applications: Sharpening of right-handed and left-handed precision tools Sharpening of drill bits (diameter 0.2 - 12 mm) Production of various engraving tools Sharpening of boring tools, single- and multi-flute cutters and radius cutters Technical specifications: Sharpening range: 1-12 mm for tools with collet; 0.3-10 mm for drills with chuck and collets Grinding spindle: axially adjustable Side stops: with fine adjustment AC motor: 120 W Electrodynamic braking system Integrated electronic board Dustproof control panel Machine lighting: 24 V halogen lamp Grinding wheel: Carborundum K 250 Grinding wheel dressing device Dust protection cover Additional specifications: Colour: Green-grey Power supply: 230 V / 50 Hz Safety compliance: CE / STR standards tested

Condition: good (used), Year of construction: 1988, functionality: fully functional, 1 x Drill bit grinding machine Wedevag WL 2 Year of manufacture: 1988 with integrated dust extraction Crodpfjz Agdxex Aktoi DCE Type: ADT 12 Technical data: Working range: 2.5 - 20 mm Grinding wheel dimensions: 203 x 10 x 32 mm Point angle: 60 to 180° Rotational speed: 2,800 rpm Accessories: 13 x Clamping head 1 x Operating manual in German The machine can be inspected while powered on.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition Crodpfx Asyxy S Rsktji

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2" Crjdpsvn U Adsfx Aktsi

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device Credpfx Aju Ng Hnektji The machine is including accessories see pictures! *

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Cedjzvnnfspfx Aktsri Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Codozxt Hfopfx Aktjri Video available upon request.

Condition: used, functionality: fully functional, 1 x drill grinding machine Darex M 5 Codpfxeyvhg Re Akteri with 2 x chucks The machine can be inspected under power.

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Crsdpfx Aeu Ngxdsktji Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! Crjdpfx Ake Ahrhijtoi Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors in technical data and prior sale reserved.

Condition: used, Drill grinding machine GÜHRING, Type SS 15 Spiral drill grinding machine Manufacturer's No. 909, Year of manufacture approx. 1977 Drill diameter max. 40 mm Grinding wheel diameter, right 300 mm Grinding wheel diameter, left 250 mm Grinding wheel width 40 mm Grinding spindle speed approx. 2800 rpm Motor power approx. 2.2 kW Power connection 380 Volt, 50 Hz - Point angle infinitely adjustable Cjdpjdzp Tbsfx Aktjri - Tapering device - Gear motor for vertical oscillation in front of the cup wheel - Diamond dressing holder - Various drill chucks - Coolant system Space requirement L x W x H 1200 x 950 x 1550 mm Weight approx. 1150 kg

Condition: used, Technical details: Crsdey Nk H Tjpfx Aktei drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min Crsdpfx Aksu Ng Ncotsi total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *