Used Twist Drill Grinding Machine for sale (66,199)

Condition: used, Year of construction: 1990, TECHNICAL DETAILS Ndsdsz S I Rdepfx Akqoc General Information Machine Type: Continuous belt grinding machine Application: Grinding and/or polishing of round materials Grinding Stations: 2 Machine Weight: approx. 6.5 t Working Area Working Area Diameter: 30 mm Material Length: 3,000–6,000 mm Speed: 20 m/min Dimensions Space Requirement: approx. 9 × 2 × 2.4 m EQUIPMENT 2 Grinding Units

Condition: used, Year of construction: 1960, Technical details: workpiece height max.: 600 mm Arm length: ca. 700 mm Njdpfx Akjx Afn Njqodc bore capacity in steel (diameter): 25 mm Table dimensions: 1100 x 400 mm

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily realized thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowelling on two levels without adjustment The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then carried out pneumatically from the front Cross adjustment approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Chassis Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Ndodpfxsyfta Tj Akqec Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is very rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (L x W x H), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm Ndodjxu Dv Aepfx Akqjc max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: new, Year of construction: 2016, Technical data: Model SA-1300 Point angle can be continuously adjusted for Ø 2-6 mm from: 118° to 135° Point angle can be continuously adjusted for Ø 6-13 mm from: 90° to 144° Collet set for drill diameters: 3 to 13 mm Collet type: ER 20 CBN grinding wheel (for HSS drills): Ø 78 mm Optional diamond grinding wheel (for carbide): Ø 78 mm Motor: 120 watts Spindle speed: 5300 rpm Electrical connection: 220 volts / 50 Hz Weight: 10 kg Documentation: Detailed operating manual and machine documentation in German Remarks: The SA-1300 drill sharpening machine is designed for sharpening and pointing 2-flute drills made of HSS or carbide*, in the diameter range of 3 mm to 13 mm. Ndjdpfjrfb Sox Akqec *Carbide drills can only be sharpened with the optional diamond grinding wheel. Spare parts and replacement grinding wheels are available from stock.

Condition: good (used), For sale: Centerless grinder, in very good condition. Njdpfx Ajz Skqbskqedc

Condition: used, Year of construction: 1972, Technical details: bore capacity in steel (diameter): 25 mm throat: 300 mm bore stroke: 630 mm spindle turning speed - continuous: 150 - 2860 U/min spindle taper MT: MK 4 Distance spindle/table max.: 630 mm table-size: 300 x 400 mm total power requirement: 1,65 kW weight of the machine ca.: 700 kg dimension machine approx.LxWxH: 0,6 x 0,8 x 2,10 m Nodezfltdepfx Akqodc

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Nedpfx Aeizka Iokqjdc Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Njdpjrtrxxefx Akqedc Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table Ndodpfx Aozwc Sbekqoc - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm Ndedozrx Hqepfx Akqoc - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, No minimum price – guaranteed sale to the highest bidder! Ndsdpfs Aa Anfsx Akqoc Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: CNC-controlled precision cylindrical grinding machine Condition: fully mechanically overhauled Machine weight: approx. 3.5 t Work Area Grinding diameter: 350 mm Grinding length: 1,000 mm Center height: 175 mm Workpiece weight: max. 120 kg Spindle and Drive Drive power: 5.5 kW Speed: max. 25,000 rpm Control System Control system: FMS 5-88 EQUIPMENT Extensive range of accessories Coolant system Electronic handwheel Separate control cabinet Safety emergency stop

Condition: used, Used Machine Nedozk Nwdspfx Akqodc Used Ganner Compact 30 In-Line Drilling Machine Features and Technical Specifications: 2 drilling beams, each with 15 spindles Pitch: 32 mm Drilling unit position adjustment: 0–650 mm Distance between drill hole rows: at least 190 mm Spindle speed: 2,800 rpm Motor power: 2 × 0.75 kW Max. workpiece clamping height: 70 mm Working height: 850 mm Compressed air connection: 6 bar Availability: upon request Location: Flörsheim

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Ndsdpfx Akewuz Ekeqjc Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 1974, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 400 mm magnetic plate size: 630 x 200 mm Max. Table-movement horizontal: X-Richtung max. 710 mm Max. Table-movement across: Y-Richtung max, 250 mm table load capacity: 110 /1100N) kp table speed: 1,5 - 18 m/min dimensions of grinding wheel: max. 200 x 20 x Ø 51 mm grinding wheel dimensions:: gespannt: Ø 142 x 20mm grinding spindle speed: 2800 U/min feed of spindle: 0,01 mm total power requirement: 5,0 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,8 x 1,2 x 1,9 m dimensions: Behälter Absaugung: 420 x Ø 350 x 680 mm The machine was used for dry grinding. -very good condition -without dressing device -dust extraction -machine lamp Njdpfx Aksu Ngmbeqodc *

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Ndjdpfju Ngk Tjx Akqsc Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Nodo Aa Ai Aepfx Akqjdc Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: excellent (used), Twist drills and taps grinder from 1,5 to 25 mm CUOGHI model APE 25 Nedeyzpf Sjpfx Akqjdc

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Ndjdpfx Aou N E Evskqoc Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: ready for operation (used), type of input current: three-phase, spindle mount: MK 4, total width: 920 mm, total length: 2,310 mm, total height: 2,590 mm, overall weight: 3,962 kg, Kitchen and Walker Radial Drill Ndsdpfoz S Nndjx Akqoc Model: E2 5’-0” Spindle Taper: No 4 Morse Spindle Speeds: 25-1560 RPM Radius Of Spindle: Max: 1575mm Min: 430mm Traverse Along Arm: 1170mm Spindle To Base Plate: Max: 1257mm Min: 152mm Machine With: Coolant and Fittings Safety Brake Box Table Ammeter Dimensions: 2310 x 940 x 2590mm Weight: 3962 Kgs

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Work Table Table dimensions: 1,100 x 260 mm Ndsdj Ad Aqnjpfx Akqec Number of T-slots: 3 Travel Ranges Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Spindle Speed range: 1,000–5,000 min⁻¹ MACHINE DETAILS General Manufacturer: Dormac Type: FU90 Machine number: 537 Year of manufacture: 1987 Electrical Connection Operating voltage: 380 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 1,000 kg EQUIPMENT 3-axis digital display ACU-RITE

Condition: excellent (used), CATALOGUE NUMBER 8005 Njdpfx Akszr U Eceqedc TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to table surface: 900 mm - Feed cylinder stroke: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling unit adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES - For 21 spindles – drill bit mounting with quick-release couplings - Vertical, horizontal and angled drilling - Unpainted - Used drilling machine, very good condition Net price: 7900 PLN Net price: 1840 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm Ndedpfxovpfzys Akqec table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm X-axis: 3000 mm Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Nedpfx Ajfmdcqskqjdc Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1964, controller manufacturer: Siemens, controller model: SIMATIC HMI TP700 / KP400, _____ Description: Year of manuf. : 1964 Control : Siemens SIMATIC HMI TP700 / KP400 Grinding width : 203 mm General: Ndsdpfjz Rtqtex Akqec Year of manufacture:1964, fully overhauled in 2015 (Huttelmaier) Weights:Total weight of the unit approx. 8,025 :kg Footprint:approx. 6,000 x 4,085 mm Grinding unit: Process:Centreless cylindrical grinding Grinding wheel:Ø 380–508 mm, width 25–203 mm, bore Dressing wheel:Ø 247–330 mm, width 25–203 mm, bore Wheel material:Corundum Dressing:Dressers for grinding and regulating wheels, Balancing:MPM BM50 automatic balancing system Feed:Motorised feed axis INK increments:0.001 / 0.005 / 0.010 / 0.100 mm Controls: Control system:Siemens SIMATIC, retrofitted in 2015 Front-panel operation:SIMATIC HMI TP700 touch panel Rear-panel operation:SIMATIC HMI KP400 control panel Operating modes:Automatic, Manual :Through-feed/plunge grinding: :Key switch on the control panel Menu pages:Dresser, grinding wheel and control wheel Plant engineering: Parts feeding:Feeding conveyor with two-hand operation Discharge:Frasch FP66N-zw belt conveyor, :Rotary table (Semotec) for finished parts Coolant lubrication:POLO Filtertechnik unit Chip management:Extraction system, switchable via auxiliary units Hydraulics:Nold Hydraulik und Pneumatik hydraulic power unit Lubrication:Central lubrication unit with :level indicator Interface:Feeding system for plunge cutting