Vertical drilling machine / vertical BAZ

Robland BM 3000

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications Kjdpfx Asd Hz Niogzefa • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Year of construction: 2008, condition: used, Four-sided planer Weinig Powermat 500 8.000 rpm | CNC | PowerLock Technical data: Used machine: Year 2008 Control system: PoweCOM Touchscreen. Feed rate: Feed rate 5 - 30 m/min. Motor: 4 kW Working range: Working width: 20 - 230 mm Working height: 8 - 120 mm 1 spindle: first lower tool holder speed: 8 000 rpm motor: 5,5 kW Tool holder: standard 2 Spindle: First right tool holder Speed: 8 000 rpm Motor: 5,5 kW Tool holder: PowerLock 3 Spindle: First left tool holder Kfodehu Ewyopfx Agzea Speed: 8 000 rpm Motor: 5,5 kW Tool holder: PowerLock 4 Spindle: First upper tool holder Speed: 8 000 rpm Motor: 7,5 kW Tool holder: PowerLock 5 Spindle: Second lower tool holder Speed: 8 000 rpm Motor: 5,5 kW Tool holder: PowerLock Radial and horizontal CNC controlled adjustment for spindle: 2,3,4,5. Dressing table: 2 000 mm long CE certified. Electrical cabinet . Machine without tools.

Condition: new, Year of construction: 2024, axis 920 mm x-axis 3000 mm material thickness Z 12 mm - 30 mm feed speed 20 m/min. A - axis 360 degrees Minimum dimension: plate: x = 300 mm Kfedpfx Agocnz H Hszja Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. depth Depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required suction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Y axis drilling: 920 mm Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm min. Hole diameter: 3 mm max. hole diameter: 35 mm Kjdpfjl D Rw Eex Agzjfa motor power: 1,3 kW weight: 500 kg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Kodpfx Ajcnw U Degzefa Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 30 mm, travel distance X-axis: 3,000 mm, hole diameter: 35 mm, swivel angle A-axis (max.): 360 °, TECHNICAL DETAILS X-axis: 3,000 mm A-axis: 360 degrees Feed rate: 20 m/min Material thickness Z: 12 mm - 30 mm Maximum hole diameter: 35 mm Minimum hole diameter: 3 mm Maximum recess depth with saw blade: 10 mm Panel dimensions Minimum panel size X: 300 mm Minimum panel size Y: 120 mm Minimum panel size Z: 12 mm MACHINE DETAILS Kfedpfx Agsxnyk Ajzoa Motor power: 0.75 HP Operating voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade

Condition: excellent (used), Year of construction: 2018, operating hours: 1,020 h, functionality: fully functional, For sale: Nesting machine from Holzher with very few operating hours and top equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4980 kg Operating hours: 1020 Processing length X: 3100 mm Processing length Y: 2200 mm Vector speed: 110 m/min Equipment: Milling unit: 12 kW, air-cooled, 1000–24000 rpm Drilling unit (XL drilling head): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear: e.g. Lamello P-System Workpiece support: High-Flow nesting table with continuous vacuum area, 16-zone vacuum controlled by software Safety device: light barrier Workpiece clamping: 2 × 140 m³/h vacuum pumps, low-maintenance dry-running, additional 250 m³/h dry-running vacuum pump Kfodpfx Aowtiq Segzja Tool changer: 10-position pick-up changer integrated in the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect DirectCut: line laser in X/Y-direction, incl. software Software: CAMPUS software machine license included, aCADemy CAD/CAM module and CabinetControl Base, “Warehouse” software module, Production software module, BetterNest free-form nesting

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Horizontal drilling head with 4 spindles on X Horizontal drilling head with 2 spindles on Y Grooving saw D=100 mm Stopping cylinder for workpiece positioning Workpiece clamping system Kfjdpevtyc Hofx Agzea Workpiece length 2500 mm Workpiece thickness 12-60 mm WOODWOP for machine WOODWOP IMPORT DXF BASIC (1 license)

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates Kfsdpfsdx Daaox Agzsa 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: good (used), Year of construction: 2002, functionality: fully functional, GOMA FC -10 KZ6 finger jointing wood joining line Polish production year of production 2002 DTR with declaration of conformity TECHNICAL PARAMETERS: wood width min / max - 40 / 160 mm thickness of wood min / max - 25 / 80 mm length of a single glued section 6000 mm compression force 7500 kG / 100 atm SAW Kfsdpfx Aot Sfz Isgzja saw blade diameter 300 mm motor power 6 kW milling machine power 15 kW PRESS hydraulic pump power 4 kW working pressure 100 bar