15
SPECIFICATIONS:
Dimensions: 214" x 143" x 70" HT
Weight: 25000 pounds
Main Mump Motor: 150 H.P./ 1800 RPM/ 460V/ 3 PH, 60Hz
Hydraulic Pressure Maximum (Thrust): 4000 PSI
Hydraulic Pressure Maximum (Acceleration): 4000 PSI
Hydraulic Pressure Maximum (Clamp): 1500 PSI
Hydraulic Volume Maximum (Main): 65 GPM
Hydraulic Reservoir Capacity: 300 GAL
Recommended Water Pressure for Heat Exchangers: 30 – 125 PSI
Recommended Water Volume (Minimum): 40 GPM at 85° F
Water Inlet Pipe Size: 1 ¼” NPT
Maximum Fi...
8
Spot welding device, spot welding machine, spot welding system, spot welding gun
Bjntpzsbyg
-manufacturer: Dalex, spot welding machine type RA 11-2
-spot welding gun: Type 3111-8
-rated power: 2.4 kVA
-operation: by hand
-transport dimensions 430/460/H480 mm
-weight: 31 kg
4
Joisten & Kettenbaum
serial number 121780
current capacity 20 kVA
Biac0spwao
weight of the machine ca. 400 kg
7
current capacity ca. 12 kVA
throat 345 mm
contact pressure capacity max. 1.800 N
Bi28iysbhu
connected load frequency 380 Volt
Furnishing:
- mobile spot welding machine
- with a mobile underframe
6
current capacity: 0 kVA
throat: 280 mm
contact pressure capacity: 17-278 daN
rated capacity: bei 50%ED:16 kVA
rated capacity: Pmax. ca. 50 kVA
open-circuit voltage: 1,8-3,6 V
Required air-pressure: 6-10 bar
Plwap
total power requirement: 37 kVA
weight of the machine ca.: ca. 200 kg
dimensions of the machine ca.: L:0,85xB:0,7xH:1,2 m
secondary short circuit current: 17 kV
1 foot pedal
i.D.
3
Spot welding device Torsten & Kettenbaum P6 16-01-002
Delivery time: immediately
Number: 16-01-002
Machine data
Year of construction: approx. 1977
L x W x H: approx. 600 x 400 x 1200 mm
Weight: approx. 120 kg
Very good general condition
Technical specifications
Power output: 6.5-12 kVA
Serial number: 1158319
Further accessories on request
By0ke32nqk
Price and further technical data on request
Symbol „Von der Community überprüft“
4
electricity performance: 30throat depth: 600pressure performance: 600weight approx.: 200messurements (LxWxH): 1500 x 500 x 1500rated power: 15 bei 50% sonst 30welding capacity: 30short-circuit current, secondary: 15
H30lwkray
5
Spot welder, spot welder, spot welder, spot welder
-Stationary
-Operation by hand switch
-Arm length welding machine: 350 mm
F3xuhub
-Welding gun type:
-Control
-Dimensions machine: 1500/1000/H1670 mm
-Weight machine: 774 kg
-Dimensions control cabinet: 1550/420/H1960 mm
-Weight control cabinet: 330 kg
5
Joisten & Kettenbaum
current capacity 35 kVA
weight of the machine ca. 300 kg
Pudlyq
1
current capacity 50 kVA
throat 300 mm
contact pressure capacity 565 kg
short circuit voltage 118 kVA
voltage 380 V
rated capacity bei 50% ED = 50 kVA
total power requirement kW
weight of the machine ca. 700 kg
dimensions of the machine ca. 0,65 x 1,20 x 2,00 m
Beolmortuq
foot switch
- Serial-no.: 1180 / 63
- with 2 - manual engagement
- Nominal voltage primary 380 V, secondary 3.5-5.2 V
- Rated current at 50% E.D. primary 132 A, secondary 9600 A
- Short circuit current primary 310 A, secon...
1
Box frame mounted spot-welding robot cell comprising of:
Yaskawa Motoman YR-ES165N 6 axis spot weld robot
Yaskawa Motoman DX100 robot controller
Motorised turntable
Omkqcwy
MTA EVO 081 chiller unit
Bosh Rexroth GK100LS105 timer
Twin parts input stations
Allen-Bradley PLC controls
Proface HMI
7
Spot welder
Pqx97
Manufacturer Nimak
TYPE PMF 2/8
Nominal power 8 KVA 380 V 32 A
Electrode force 180 daN
Connections for water cooling
Weight 120 kg
Length 1 m
width 0,5 m
Height 1,50 m
4
current capacity max. 13 KW
throat 120 mm
contact pressure capacity max. 120 kp
voltage 400 V
open-circuit voltage 2,5 V
output voltage 6300 A
welding power 2 x 2mm Blech
fuse protection -thermal 25 A
total power requirement 13 kW
weight of the machine ca. 12 kg
dimensions of the machine ca. 0,5 x 0,1 x 0,2. m
Br83zjpuur
Manual spot welding machine with 2 sets of welding points,
1
High performance spot welding gun
air operated, water cooled
DALEX Type 3528
Rated power at 50 % ED: 63 kVA
Sec. short circuit current: 31 kA
Electrode force: 60-730 daN
arm spacing: 170 mm
Arm reach: 170 mm
with double stroke cylinder long stroke 62 mm
pre-stroke 40 mm - working stroke 0-22 mm
with cardan suspension and suspension bracket
HIE synchronous welding control MTW 5Z
EXAMPLE PHOTO
Egrnq3ho
tong is in refurbishment
4
Joisten & Kettenbaum
Biacz9nkym
current capacity 12,5 kVA
weight of the machine ca. 390 kg
5
Spot welding machine Fabr. ARO type PSM 150
Masch.# 1021
Technical data:
Rated output at 50% ED 15 kVA
Arm distance 190 mm
Throat depth 150 mm
Electrode force 9.5-4.22 V / 5 levels
Primary voltage 380 V / 50 Hz
with
-extended special electrodes 250 mm projection
-separate control cabinet with 6 power levels
3wodaiwmz
-Foot switch
used, in very good condition
1
Box frame mounted spot-welding robot cell comprising of:
Yaskawa Motoman YR-ES165N-B00 6 axis spot weld robot
Yaskawa Motoman NX100 robot controller
Bosh Rextroth GK100LS105 timer
ICS IC 220 chiller unit
Allen-Bradley PLC controls
Bxbg9npxrl
Proface HMI
YOM 2007
5
Spot welding device, spot welding machine, spot welding system, spot welding gun
Bjrrkc9iwm
-Manufacturer: Dalex, spot welding machine type A11.1
-Voltage: 380 V.
-Transport dimensions: 230/270/H205 mm
-Weight: 20 kg
3
current capacity:7 kVA
Y7lzuify0
throat:400 mm
contact pressure capacity:200 kp
dimensions of the machine ca.:0,8 x 0,45 x 1,1 m
4
Zinser spotwelding machine offered.
Type: P10FS
Bywhjcq7jg
6
Dalex
Djkvi3r
current capacity 100 kVA
weight of the machine ca. 500 kg
2
Spot welding gun Fabr. As LEX type 3326-3
Bc8jhq83tk
Masch. # 1L 3002/1 year Nov. 1971
Technical data:
Throat depth 400 mm
Power at 50% ED 22 kVA
SEC short-circuit current 14 k
Throat depth 500 mm
KVA power 34.8
Operating power kVA at 50% ED 5.4
Electrode force 280 daN
Weight 37 kg
with
-Control unit type J 5 WS 4
used, in good condition
3
Power output PN: 45 kVA
Power PA: 60 kVA
Throat: 630 mm
Working stroke:
Pressure capacity: 4,500 N
Cooling type: water 2,5 l/min
Cdo7r0s3
Voltage U2: 3.3 to 7.0 V
Connection Pmax:
Accessories/equipment: Attachment THS150-1 (86/47/87)
and EZ4-1 (83/37/87)
Condition: good
Weight:
Dimensions: 1,600 x 600 x 1,800 mm
ROBOTIC Spot welding Cell NIMAK
Byqifurih8
- 1 X KUKA KR 150-2 2000
- WELDING POWER 100 Kwa
- WELDING CONTROLS NIMAK QUALITY WELD 2000
- 2 WELDING STATIONS
- 1 x AUTOMATIC SHARPENING SYSTEM FOR ELECTRODES
- WELDING CELL IS IN THE PRODUCTION
- EXCELLENT CONDITION
- WORKING HOURS : APROX 7200H
- COOLING CHILLER
WE ORGANIZE FOR CUSTOMER DISMANTLING , LOADING ON TRUCK.
FOR TRANSPORT WE AS WELL CAN ORGANIZE FOR CUSTOMER
3
current capacity:100 kVA
throat:280 mm
Y7mihrzol
capacity at 50%:100 kVA
pressure:1,1 t
stroke:100 mm
table-size:180 x 170 mm
control:MPS-29-K-S-R
total power requirement:279 kW
weight of the machine ca.:1,3 t
dimensions of the machine ca.:1,4 x 1,15 x 2,1 m
spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off
2
parallel guided, water cooled spot welding machine
Type DALEX PL 80-1
Jpgktyll
rated power at 50 % ED: 80 kVA
Sec. short-circuit current: 35 kA
Sec. open-circuit voltage: 8,44 V
Electrode force: 100-600 daN
Arm reach: 350 - 650 mm
arm distance: 160 or 360 mm
equipped with:
add-on switch cabinet according to VDE 0100
Main switch
Synchronous welding control MPS 200
EXAMPLE PHOTO
4
Dalex
serial number 08668
Biac38zdaw
current capacity 25 kVA
weight of the machine ca. 330 kg
2
Compressed air-operated table spot welding machine Fabr. As LEX type F 82-1/ZG
Masch.# 6693320 built in 1972
Technical data:
Nominal power 50% ED 10 kVA
KVA continuous 7.0
High short-circuit power 42.2 kVA
Maximum welding power 33.7 kVA
KVA power 25.3
Number of control level 10
Stepless stroke 40 mm
Electrode force of 5 - 90 kgf
RADIUS 190 mm
Arm distance of min/max 118 mm
Performance sheet steel 2.5 + 2.5 mm
Performance brass 1.5 + 1.5 mm
Performance aluminum 1,2 + 1,2 mm
Performance steel 8.0...
6
OFFER 21108
Technical data:
- Rated power at 50% duty cycle 25 kVA
- Max. welding power 107 kVA
- Overhang adjustable 140 - 300 mm
- Welding values - sheet steel 6 + 6 mm
- Brass sheet 3 + 3 mm
- aluminium sheet 1,2 + 1,2 mm
Gjqoih8pm
- Electrode force adjustable 17 - 278 daN
- Control DALEX 1/ 01 TT
- foot switch
- Cooling water quantity 8 l/min
- Drive 380 V
- Space requirement approx. W 670 x H 1250 x D 1550 mm
- Weight approx. 240 kg
1
nominal capacity: 12,5 kVA
throat: 350 - 500 mm
Bafnealo
spark plug air gap: 120 mm
welding capacity steel: 8 mm
electrical connection: 380 V kW
space needed: 400 x 1000 x 1150 mm
weight: ca. 190 kg
2
Dalex Works
Pms 10-2
380V
50Hz
rated power at 50 duty cycle: 63 kVA
secondary short circuit current: 45 kA
rated primary voltage 380 V - 50 Hz
open circuit voltage of 5,6 V
electrode force: 65-390 daN
Machine weight 341 kg
Sjgpejit
3
Power at 50%: 16kVA
Short circuit-current: 20,7kA
Electrode force: 20-390daN / single stroke
Throat depth: 200mm
---
Weld control: MPS 1036 (5-times, 1-program)
---
Extra Equipment:
- foot pedal
Bypb9olidz
- main switch
---
Warranty: 6 months
---
Spotwelding electrodes + spare parts at stock
6
Gensch
Biac3vh7mv
current capacity 18 kVA
weight of the machine ca. 360 kg
2
Point welding pliers Fabr. DALEX Type 3426.2
Fabr. # 3K66
Technical data:
Connection power 35 kVA
Nominal power at 50% EA 25 kVA
Operating power 14 kA at 50% ED
Short-circuits current 16.5 kA
max. Electrograde raft 5-540 kp
Arm spacing 170 mm
Welding values 5 + 5 mm
Betm3fwgcm
with
-Control
-Balancer
used
7
OFFER 21107
Technical data:
- nominal power at 50% ED 25 kVA
- max. welding power 107 kVA
- throat adjustable 140 - 300 mm
- Welding values - sheet steel 6 + 6 mm
O9apt
- Brass sheet 3 + 3 mm
- aluminium sheet 1,2 + 1,2 mm
- Electrode force adjustable
- Control DALEX 1 - 01 TT
- foot switch
- Cooling water quantity 8 l/min
- Drive 380 V
- Space requirement approx. W 670 x H 1250 x D 1550 mm
- Weight approx. 240 kg
2
nominal capacity: 100 kVA
throat: 500 mm
Efu8t9u
spark plug air gap: 330 - 500 mm
electrical connection: 400 V kW
space needed: 700 x 1420 x 2000 mm
weight: 750 kg
4
current capacity:20 kVA
throat:550 mm
max. short circuit power:42 kVA
max. welding power:34 kVA
open-circuit voltage:1,8V - 3,2V (in 8 Stufen) V
voltage:380 V
frequency:50 Hz
current:13 A
dimensions of the machine ca.:0,4 x 1,2 x 1,3 m
Lqjnd28z
2
Max. welding power 20 kVA
Short circuit power 25 kVA
Nominal power at 50 % ED 10 kVA
Throat 500 mm
Max. Secondary short circuit current 10 KA
Gut8i7z
Connected load 15 kVA
Dimensions W x D x H 400 x 1100 x 1150 mm
Weight 200 kg
Accessories / Special features:
- Water cooling by external connection
- Adjustable current time 0 - 10
- Adjustable electrode force by adjusting the spring
- Mechanical foot switch
Note / Reference value:
With a max. secondary short-circuit current of 10 KA, a max. sheet...
5
Joisten & Kettenbaum
serial number 9600/2
current capacity 15 kVA
Biac7ikiux
weight of the machine ca. 300 kg
1
Spot welding gun Fabr. ARO type P 295 AW
Masch. # 00224/79 with control unit
T2fyu7xd
4
Made in Dalex works
Condition: corresponds to age, disconnected, connection and testing possible. Maintenance was regular, worn things were replaced except for the lower holder, which has a crack, but they worked with it for several years.
weight 381 kg
Bswt2stu
documentation in German
nominal capacity: 20 kVA
throat: 250 - 600 mm
spark plug air gap: 270 mm
I3l7hpk
welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm
electrical connection: 380 V kW
space needed: 470 x 1170 x 1300 mm
weight: 210 kg
10
Schlatter P2 spot welding machine - ready for immediate use
Byadptqmwh
3
Robotic welding gun RAS with WTC GEN6 MFDC 400A inverter. The welding gun was standing in a warehouse for 10 years attached to the robot after the company was bankrupt. For more information and better price please contact me. You can come and inspect the item, there is no problem. Selling for a company with a valid VAT number, or +21% on a price if you buy as a private. Shipping price in EU ~300 Eur.
C0phfi9
2
ready for use, used machine make JOKE-Josten+Kettenbaum
type PF 14 Nr.119/97/2, 12,5 KVA, throat approx. 650 mm,electrode force
160 KD, current time setting coarse 0,05 -- 5 sec., fine switching 1-6 switch-
Sxfouecp
water cooling, dimensions 1550 mm long x 370 mm wide x 1500 mm high, weight approx. 450 kg, welding process can be demonstrated.
materials from 3 to 3 mm, standing models with
welding time limiter from 1--10 sec.,time cut-off,water cooling,
foot switch, power 380 Volt - 25 KVA, elect...
2
Pedal-operated Spotwelder Fabr. As LEX type TG 16/71
Masch. # 4714325/1 technical data:
Rated output at 50% ED 16 kVA
Power supply 37 kVA
sec. Short circuit current 17 KA
Throat depth 350 mm
8 levels of open-circuit voltage 1.8-3.6 V
Power timer 3-100
Qz9mnb8f
Weight approx. 192 kg
with
-Electrode arms on request
-water-cooled version
-fahbares base
used, in good condition
6
Performance Sc=120 kVA/S=170 kVA, gap coloumn to points 1200 mm, gap between points 240/490 mm, foot pedal, dimensions 2150x600x2070 mm, weight ca. 800 kg, not much used
Balqp09c
3
nominal capacity: 12 kVA
throat: 150 - 400 mm
spark plug air gap: 158 u. 210 mm
welding capacity steel: max. ca. 1,5 + 1,5 mm
electrical connection: 380 V kW
Nodk7
space needed: 700 x 400 x 1700 mm
2
Power at 50%: 40kVA
Short circuit-current: 26,2kA
Electrode force: 100-600daN / single stroke
Throat depth: 250-550mm
---
Weld control: MPS 10-alpha (5-times, 8-program)
Bxxhhlaiun
---
Extra Equipment:
- foot pedal
- main switch
---
Warranty: 6 months
---
Spotwelding electrodes + spare parts at stock
15
Ideal CSR Typ. 201 - 21
wire mesh production line CSR
Project JIg welding machine
Year of manufacture 1996
Switch / control cabinet
kVa125
Made in Germany
Control: W/Siemens Handheld Computer Control
Mounted In Enclosed Wire Cage Safety Structure
The coordinate welding machine CSR 201 is used for resisting point welding of sheet metal and wire products in stencils:
Work-piece dimensions:
Length max.1800 mm
Width max. 750 mm
Height max. 200 mm
X-axis for driving the welding unit according to...
Used Spot welding machines
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 220,000 inquiries per month
How to receive 100% of our e-mails
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
