Used Zay 7045 for sale (69)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Bsdpfszrd Tvox Anpelp

Condition: new, Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Blodpfx Aevrv Ngenpsp Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2026, loading space length: 136,000 mm, loading space width: 2,590 mm, loading space height: 4,000 mm, suspension: air, color: grey, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = Pezzaioli NEW - 3-deck livestock trailer - Water & Ventilation - Steering axle - Type 2 Year of manufacture: 2026 - NEW 3 decks Lifting roof Lifting floor Water & Ventilation - Type 2 preparation Bsdpfs Af U D Sjx Anpolp Hydraulic loading ramp Steering axle Lift axle Remote control Automatic sliding = Further Information = General Information Year of construction: 2026 Axle Configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Max. axle load: 9000 kg; Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 13,500 kg Payload: 21,500 kg GVW: 35,000 kg Condition Technical condition: very good Optical condition: very good

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 01/2005, suspension: air, tire size: 245/70R17.5, color: black, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = Pezzaioli 3-level livestock carrier - Water & Ventilation - Lifting roof - Lifting floors Year: 2005 ZFJSBA31U4M002770 3 levels - Livestock Lifting floor Lifting roof Loading ramp Water & Ventilation = Further Information = Year of manufacture: 2005 Tire size: 245/70R17.5 Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 8000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Bjds Aga Tkjpfx Anpelp Rear axle 2: Dual tires; Max. axle load: 8000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Dual tires; Max. axle load: 8000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% GVWR: 36,000 kg Technical condition: good Optical condition: good

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2026, total length: 13,600 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 245/70R17.5, wheelbase: 6,470 mm, = Additional Options and Accessories = - Lifting axle - Air suspension = Notes = Pezzaioli SBA31 SR 1st registration: ZFJSBA31USM009112 Unladen weight: 13,500 kg Lifting axle Lifting roof Hydraulic floor 3 + 4 levels Loading lift NEW Dutch registration: OX-49-HD = Further Information = General Information Year of construction: 2026 Registration number: OX-49-HD Axle Configuration Tire size: 245/70R17.5 Rear axle 1: Double tires; Lifting axle; Max. axle load: 9000 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 2: Double tires; Max. axle load: 9000 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 3: Double tires; Max. axle load: 9000 kg; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Weights Unladen weight: 13,500 kg Payload: 25,500 kg GVWR: 39,000 kg Maintenance, History, and Condition APK (Technical Inspection): Valid until 07/2027 Technical condition: good Optical condition: good Further Information Please contact VAEX The Truck Traders for further information. Blodpfxezpx Atj Anpep

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 8,500 kg, permissible axle load (axle 3): 8,500 kg, first registration: 03/2007, total width: 2,550 mm, wheelbase: 6,050 mm, General Information Year of manufacture: 2007 Axle Configuration Maximum front axle load: 10,000 kg Rear axle 1: Lift axle; Max. axle load: 8,500 kg Rear axle 2: Max. axle load: 8,500 kg Weights Unladen weight: 9,240 kg Payload: 17,760 kg Blsdpfez Rn Sxox Anpjp GVW: 27,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 04.2027 Technical condition: good Optical condition: good Additional Information Please contact Maarten Busser or Niels Busser for further information.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1106x883x543 mm Weight 195 kg Blsdpfx Aovz Hg Ienpep Total power requirement 2,3 kw

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Hub roof Blodeyxw A Tepfx Anpep Separate floor / two-cylinder system Operates independently Remote control = Further information = Year of construction: 2011 Tire size: 385/55/22.5 Rear axle 1: Steered; Tire tread depth left: 65%; Tire tread depth right: 65% Rear axle 2: Tire tread depth left: 65%; Tire tread depth right: 65% Unladen weight: 10,800 kg Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 4,700 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, table width: 1,000 mm, table length: 5,000 mm, total height: 3,700 mm, total width: 4,500 mm, total length: 9,000 mm, workpiece weight (max.): 10,000 kg, spindle motor power: 37,000 W, CNC Bed-Type Milling Machine ZAYER - 30KFU5000 MACH-ID 9885 Make: ZAYER Type: 30KFU5000 Control: SIEMENS 840D YOP: 2001 The Zayer 30 KFU 5000 is a heavy-duty CNC bed-type milling machine manufactured in Spain. It is designed for precision machining of large, heavy and complex workpieces. With its powerful milling spindle and automatic milling head, this machine offers excellent flexibility for machining large components from multiple angles. Heavy machinery manufacturers – Machining large machine frames, bases and structural components. Steel fabrication companies – Milling, drilling and finishing large welded steel constructions. Energy and power generation – Manufacturing components for turbines, generators and industrial equipment. Oil gas industry – Machining large flanges, valve bodies and pressure equipment components. Mould and die manufacturers – Precision machining of large moulds, dies and tooling. General subcontract machining companies – Producing large, complex components in small and medium production batches. Main advantages The Zayer 30 KFU 5000 combines heavy-duty cutting capacity, excellent rigidity and versatile machining possibilities. Its automatic milling head allows horizontal, vertical and angular machining, reducing the need to reposition large workpieces. An excellent machine for companies looking for a reliable, powerful and versatile CNC milling solution for large-scale precision machining. Chain ATC 30 Positions Chip conveyor Controller Siemens 840D Coolant system filtration X-Axis: 4700mm Y-Axis: 1250mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 10000 Power on spindle: 37kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 9000mm Width: 4500mm Height: 3700mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Blsdpfxj Agu Tqs Anpop

Condition: new, Year of construction: 2026, Base for ZX 7045 milling-drilling machine Bedpfx Ajvxtn Tjnpolp

Condition: used, Year of construction: 2014, Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades. Blodsz Nw H Aspfx Anpjp Technical Data: Circular saw blade diameter 80 - 650 mm, circular saw blade bore diameter from 10 mm, blade thickness up to 5 mm, tooth pitch 6 - 100 mm, rake angle -10° to +30°, clearance angle 5° to 25°, tooth height difference arbitrary, bevel grinding on the tooth back up to 45°, bevel grinding on the tooth face up to 15°, grinding wheel diameter 125 mm, grinding wheel bore diameter 32 mm, connected load 400 V / 50 Hz, weight approx. 850 kg, dimensions W x D x H = 1502 x 960 x 1900 mm, colour grey RAL 7045 / grey RAL 7047. Suitable for automatic grinding of the tooth face and tooth back of carbide-tipped circular saw blades.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, The Zayer ZF1700 is a CNC milling machine designed for machining workpieces, equipped with a Heidenhain control system. The Zayer ZF1700 features a working area of X: 1,420 mm, Y: 880 mm, Z: 650 mm, a maximum spindle speed of 3,000 rpm, and a weight of approximately 9,000 kg. Main technical specifications: Machine type: CNC milling machine. Control: Heidenhain TNC 150. Working area (X/Y/Z): 1,420 mm / 880 mm / 650 mm. Spindle speed: Up to 3,000 rpm. Bodpfx Asw Tq A Ienpslp Weight: Approx. 9,000 kg. Dimensions (W/D/H): 3,557 mm / 5,200 mm / 2,750 mm.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Bsdpfxs Af Uycj Anpjlp Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Total power consumption: 65 kVA Machine weight: 16.000 kg Equipment: Automatic, infinitely variable 2-axis universal milling head NC rotary table (dividing head) with tailstock 30-station tool changer Chip conveyor Coolant system with internal coolant supply (ICS) Electronic handwheel 3D touch probe Machine enclosure Operating manual Machine without clamping units, tools and holder.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Overhauled: 2014 Control system: Heidenhain iTNC 530 Bljdpfx Ao Adn Rgsnpep Table: 10,000 x 3,000 mm X-axis travel: 10,000 mm Y-axis travel: 4,200 mm Z-axis travel: 1,100 mm Distance between columns: 3,500 mm Distance between table and spindle (without head): 2,000 mm Distance between table and 45° head: 1,298 mm Table load capacity: max. 30,000 kg Rapid traverse rate: 10 m/min Feed rates: 6 m/min Spindle speed: 3,000 RPM Spindle power: 40 kW 3 heads: 1. Vertical, integrated, 2. Universal orthogonal head 1°, 3. Universal twist head

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 10,237 h, load capacity: 4,500 kg, lifting height: 3,880 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, power: 53 kW (72.06 HP), motor manufacturer: Deutz, gearing type: hydrostat, fork length: 1,800 mm, empty load weight: 6,412 kg, total height: 2,600 mm, color: orange, motor model: BF 4M 1012E, Equipment: adjustable boom, cabin, front guard, lighting, pallet forks, sideshift, trailer coupling, Forklift truck: + Still + R70 45 + Year of manufacture 2005 + 10,237 operating hours + Deutz diesel engine, BF 4M 1012 E, 72HP + Own weight: 6,412kg + Lifting capacity: 4,500kg Bjdpfjwqc Tbox Anpjlp + Height: 260cm + Fork length: 180cm + Lifting height: 388cm + Sideshift + Hydraulic fork adjustment + Full cabin with heating and work lights + Yellow light + Forklift from 1st owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and spelling mistakes possible, intermediate sale reserved!

Condition: good (used), SATORIUS electronic balance, price: 1.150 Euro, contact: Mr. Rainer Eckerle Bodpsdblbbjfx Anpslp

Condition: used, Year of construction: 2019, Technical details: x-travel: 16000 mm Bedpfx Aszp Itbonpjlp y-travel: 4000 mm z-travel: 1600 mm

Condition: used, Year of construction: 2013, machine/vehicle number: FA59, Used automatic Tecmi shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for high-efficiency industrial packaging of PET bottles on a used bottling line. Manufactured by TECMI, the machine combines reliable mechanics with Siemens automation to deliver consistent bundle quality for beverage production and other industrial packaging applications. With a compact footprint and robust construction, it is well suited for second hand integration into existing packaging machinery layouts.Manufacturer: TECMIModel: EV 750 – 50 – TT 70-45 x3Year: 2013Production speed: 50–100 bundles/minute, (36.000 BPH on 3x2 format) Configured format: PET 380 ml x 6-packContainer types: PETElectrical data: 440 V, 60 HzWeight: 1300 kgOperating mode: AutomaticControl platform: Siemens PLC/HMIAdvanced Automation & Control SystemsThe shrink wrapper is managed by a Siemens PLC with an HMI interface, providing intuitive setup, recipe handling, and diagnostic visibility for operators. Automated film handling, sealing, and shrink processes enable stable performance across the specified speed range. Temperature control and sealing parameters can be fine-tuned to maintain seal integrity and pack appearance, supporting consistent quality under demanding beverage production schedules. Interlocked guarding and safety monitoring are integrated into the control system to protect operators and maintain uptime.Production Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or as a standalone unit, this packaging machine supports infeed from upstream conveyors and discharge toward downstream case handling or palletizing systems. The configured setup is optimized for PET 380 ml bottles arranged in 6-packs with neutral film. The automation platform simplifies line synchronization and facilitates quick adjustments when coordinating with other bottling equipment such as fillers, labeling machines, and palletizers.Machine Condition & Maintenance HistoryThe machine is currently in storage. As a second hand unit, it has higher working hours compared to other available machines noted as having less than one year of use. Despite this, the Siemens-based control and industrial-grade build are designed for longevity, offering dependable performance when properly serviced and commissioned.Operational Performance & VersatilityTargeted at industrial packaging needs in beverage production, the unit runs neutral film and forms stable 6-pack bundles of PET bottles. Its speed envelope of 50–100 bundles per minute provides flexibility for varying line capacities and demand profiles. The machine’s automation and consistent sealing performance support repeatable packaging quality, minimizing rework and optimizing throughput on high-volume lines.Installation Requirements & Site PreparationPlan for adequate floor space based on the EV 750-50 layout and ensure clear access for film loading and maintenance. Electrical service must provide 440 V,... Blodo Adyvnspfx Anpop

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 3,800 mm, ZAYER MOVABLE COLUMN MILLING MACHINE TECHNICAL SPECIFICATIONS Model: 30KCU 10000 AR CNC: Siemens 840D X: 10,000 mm Y: 1,600 mm Z: 3,800 mm Rotary table: 2500 x 2500 mm 2 T-slot tables: 2500 x 2000 and 4000 x 2500 mm Tool magazine: 60 positions Automatic head: 0.001º Motorized cabin for the operator PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, Bedjzzxntjpfx Anpelp BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Year of construction: 2008, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes Blodozdinkepfx Anpjp X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Bledpfxjw S I Dge Anpjp Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Bjdpfxjycckce Anpolp Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: ready for operation (used), functionality: fully functional, Zayer milling machine, model 60BM, with a table of 2030mm x 700mm, featuring a dimension display, and a motorized ram. Longitudinal travel: 1,524 mm, ram travel: 712 mm, vertical travel: 560 mm, ISO 50, speeds: 24-1685 rpm, spindle motor power: 15 hp. The machine has been inspected. Approximate machine weight: 6,500 kg, in good condition. Blodpfx Anozmp Inspop

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 52334, travel distance X-axis: 2,750 mm, travel distance Y-axis: 1,060 mm, travel distance Z-axis: 1,550 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,060 mm, feed length Z-axis: 1,600 mm, rapid traverse X-axis: 7,000 m/min, rapid traverse Y-axis: 7,000 m/min, rapid traverse Z-axis: 7,000 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (max.): 1,600 rpm, spindle speed (min.): 5 rpm, table width: 900 mm, table load: 8,000 kg, table length: 3,000 mm, mount diameter: 1,200 mm, table height: 600 mm, total height: 2,850 mm, total width: 2,450 mm, total length: 4,900 mm, type of input current: three-phase, rotational speed (max.): 1,600 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 8,000 kg, overall weight: 16,000 kg, Equipment: rotational speed infinitely variable, ZAYER BF3 3000 HEIDENHAIN TNC150 Bjdoyn Ir Ajpfx Anpelp ZAYER BF3 3000 HEIDENHAIN TNC 155 €7,000 each 3 fully functional machines can be inspected upon request. I also have 2 Nicolas Correa A10 machines, along with other machinery and equipment for the industry. Magnetic tables are not included.

Year of construction: 2006, condition: ready for operation (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,100 mm, overall weight: 80,000 kg, spindle motor power: 40,000 W, spindle speed (max.): 3,000 rpm, table load: 30,000 kg, number of axes: 5, This 5-axis Zayer FP-10000 Bed Type Milling Machine was manufactured in 2006. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 4,200 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 10,000 × 3,000 mm and a maximum table load of 30,000 kg. If you are looking to get high-quality milling capabilities, consider the Zayer FP-10000 machine we have for sale. Contact us for further details. • Table size: 10,000 × 3,000 mm • Distance between columns: 3,500 mm • Table-to-direct-output-head nose distance: 2,000 mm • Table-to-45° head nose distance: 1,298 mm • Rapid traverse X/Y/Z: 10,000 mm/min • Working feed X/Y/Z: 6,000 mm/min • Universal 45° head speed: 3,000 rpm • Direct-output head speed: 3,000 rpm • Automatic TWIST head speed: 3,000 rpm • Speed ranges: 2 • Number of heads: 3 • Hydraulic tool clamping: Included • Manual head change: Included • Portable handwheel: HR-410 • Motors: Siemens • Machine condition: Excellent Additional equipment • Universal 45° head, 3,000 rpm • Automatic spherical head • Continuous rotation in both bodies • Manual retractable support on the right side Bsdpfx Asz D Az Tjnpjlp Technical Specification Taper Size ISO 50