Used Zl 502 for sale (1,005)

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: N20190155, Wet cutting machine Metkon Servocut 502 - AX for sale due to business closure, little use, includes diamond cutting blade. Dslhcdozvlqkjw Ajwc

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side Dwolhcdwoyyz Ebe Aoc - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free Djlsyyzxhehcdw Ajwc We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), input voltage: 380 V, type of input current: three-phase, pressing force: 50 t, stroke length: 100 mm, Used hydraulic press brake Brand: Ajial Colly Model: 502 H-5 Dwjlhcez Duldsdw Aec Bending length: 2100mm Pressing force: 50 tons Stroke: 100mm Motor: 5.5Hp (Three-phase 380V) Up and down movement controlled by foot pedal. Includes: - Ajial 85º punch set, 2000mm - Multi-V die, 54x54mm, 2000mm + 1 additional section for testing, with some defective V-shapes (See die on the floor)

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Dwslhjz Hwhyocdw Asc Weight: approx 4 T

Condition: used, Year of construction: 1999, functionality: fully functional, machine with 65mm bar passage C-axis with double turret (upper turret motorized) tailstock bar feeder interface FANUC CNC year 1999 CE standards complete with manuals and tool holder set. Spindle Speed 0-4,000 rpm Spindle Diameter 200 mm (160 mm) X-axis Travel 235 (195+40) mm Z-axis Travel 500 mm Maximum Turning Diameter over Bed 680 mm C-axis 0.01° Turret 12 + 8 Tools Rapid Traverse X 18 m/min Z 24 m/min Number of Tools 12 M + 8 Motorized Tools YES on the upper turret Tool Change Time 0.7 sec Machine Weight 6,500 kg Dwelhcsz Hn A Ujdw Aoc Dimensions (length x width x height) 4000 x 2200 x 2300h

Condition: used, Year of construction: 1992, operating hours: 6,254 h, Wheel loader ZL 1801 with original 6,254 operating hours Rotating beacon at the front and rear Road approval 94 kW / 128 hp Djlhozahgqscdw Aewc Front axle load 7,000 kg Rear axle load 6,000 kg Wheel loader in good overall condition, fully functional. No liability for typographical or data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers and semi-trailers from the year 2000-2026. Nationwide delivery possible.

Condition: excellent (used), Year of construction: 2021, Palamides Gamma 502 Year 2021 Banding delivery system for folding machines, saddle stitchers, etc. Height-adjustable infeed Suitable for two product streams (parallel) Press station with a pair of press rollers Shingled product transport for high-speed production runs Banding system for two bands Equipped for 50 mm wide banding material Equipped for product thicknesses of 0–6 mm Foldable delivery table Located in Germany Delhszqtl Eecdw Aswc Used in conjunction with a Horizon machine; can also be adapted for other folders Available immediately

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Dolhcdjxvxrnsw Aswc Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: used, Year of construction: 1986, Schmidt VF5 ZL Front-Mounted Snow Blower Year of manufacture: 1986 Specifications: Attachment plate size: 3 Discharge chute with hydraulic side adjustment Drive via PTO shaft Clearing width: 2,600 mm Weight: 1,650 kg Dolhcdwex Svwce Ajwc Sale in current condition and only to businesses! Our business hours: Mon-Thu: 07:00 - 15:30 Fri: 07:00 - 15:00 Offer based on our general terms and conditions! Sale to commercial customers only! Used vehicles/equipment are sold without liability for material defects according to our T&Cs! If you have any further questions, I am at your disposal. For viewings and/or test drives, please arrange an appointment in advance! Vehicles/equipment are not always available on site.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 422250708034, Punching force: 500 kN Stroke: 32 mm Adjustable stroke: 10 - 32 mm Stroke rate: 35 /min Standard punching tool: 31 Ø in 12 mm Djlhcsz Dit Njdw Aowc with punching table: 24 Ø in 16 mm with special punching tool: 58 Ø in 7, 65 Ø in 6, 90 Ø in 4 and 130 Ø in 3 mm Hydraulic drive: 380 V, 4 kW Weight: 1530 kg Space requirement: 1200 x 1100 x 1680 mm The machine has only 303 operating hours!

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Dwolhcdsz N Exgjw Asc Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock Dwsljzi S R Rshcdw Aec • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 510 mm, turning length: 752 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, feed rate X-axis: 18,000 m/min, feed rate Z-axis: 24,000 m/min, CNC Lathe MORI SEIKI ZL-2035MC – Technical Data Sheet The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, featuring dual spindles and live tool turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining processes. General Specifications Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of construction: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacities Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Max turning diameter: Spindle No. 1: Ø 390 mm Spindle No. 2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No. 2) Axis Travels X Axis: No. 1: 235 mm No. 2: 175 mm Z Axis: No. 1: 520 mm No. 2: 490 mm B Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 11 / 7.5 kW Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Djlhcdwsxd Td Uj Ajwc Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No. 1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Turret No. 2 Number of stations: 8 Driven stations: Yes Driven tool speed: 3,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Rapid Feeds X axis rapid traverse: 18,000 mm/min Z axis rapid traverse: 24,000 mm/min B axis rapid traverse: 24,000 mm/min Manual feed for X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 live tool holders and various fixed toolholders Chip conveyor Transformer Part unloading arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration

Condition: ready for operation (used), Year of construction: 2022, A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Dwslhcdwoycwucs Aoc

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately - Dwelheyy S Uascdw Asc

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Sold complete With documentation Deloypb Nkjhcdw Ajwc With chip conveyor

Condition: used, Year of construction: 2015, Technical specifications: - Manufacturer: Weger air solutions - Year of manufacture: 2015 - Model: ZL66 - Motor output: 1.27 kW - Length: 2,900 mm - Width: 705 mm - Height: 890 mm - Duct connection: suction 605x655 mm, discharge 605x560 mm - Heating medium: hot water PWW 70/50 Dwelhcdwsykuz Aj Asc - Airflow: 3,000 m³/h - Heating pipe connection diameter: DN 32 mm - Voltage: 230V - Location: in stock - Voltage fluctuation max. +/- 5%

Condition: used, Year of construction: 1995, Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible. Dwoljzyq R Rjhcdw Asc

Condition: new, Year of construction: 2026, functionality: fully functional, grinding wheel diameter: 200 mm, grinding spindle motor power: 4,000 W, Saw blade grinding machine "Schmidt Tempo ECT 502 Retro" suitable for: - HSS and carbide saw blades up to 520 mm in diameter and 8 mm thick - completely overhauled mechanics and additional drive for automatic chip angle adjustment. - modern, mandatory safety devices - new control system, new software - operable via touchscreen display - 4 kW grinding wheel drive motor in combination with a frequency inverter for variable cutting speeds of 24-60 m/sec. - definable grinding speed, 3 profiles - automatic chip angle adjustment / swivel angle Dslhez Dhbfjcdw Aewc - Autopos 4 - latest generation - adjustable via machine menu - freely definable special teeth, graphical control - remote maintenance and updates possible - extensive diagnostics and machine data menus - ...and many other features and functions - optionally with coolant system and necessary accessories

Condition: used, machine/vehicle number: 008699, Max. forward feed speed: 36 m/min Number of shafts: 1 Dwolhcozrl Hdedw Aec Motor power: 40 KW Blade number: 3

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for various cushion sizes • Program change is activated with the push of a button • Cushions from 4 cm to 16 cm in length can be produced individually with a defined filling level • 10 programs are available for storing multiple parameters 51026ä Dolhcswulylodw Aswc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V01496, Year of construction: 2019, operating hours: 10,328 h, load capacity: 1,500 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Free lift: 1,519 mm Overall height: 2,121 mm Load capacity: 1,500 kg MACHINE DETAILS Dwolhez I Nc Socdw Asc Mast type: Triplex Vehicle type: Electric 3-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Battery voltage: 24 V Operating hours: 10,328 h EQUIPMENT Side shifter 3rd valve External reference: SL15861SP

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, control type: CNC control, controller model: FSCUT, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 2,000 mm, working width: 1,000 mm, type of cooling: water, overall weight: 1,500 kg, Equipment: cooling unit, emergency stop, fume extraction, Z1313 CNC Fiber Laser – 3 kW – Year of manufacture 2023 – only 200 hours of operation – 2000×1000 mm – Private sale – €35,000 Description For sale is a Z1313 CNC fiber laser, manufactured in 2023, from a private owner. The machine has only been used privately, has approximately 200 hours of operation, and is in very good, fully functional condition. Ideal for metalworking, workshops, prototyping, small series production, and precise cutting work. Technical data Model: Z1313 Laser power: 3 kW fiber laser Working area: 2000 × 1000 mm Year of manufacture: 2023 Hours of operation: approx. 200 Condition: very good, ready for immediate use Control: CNC system including operating monitor Software: CypCut cutting software (FSCUT controller) DXF/AI/SVG import Automatic nesting Delhezrfryscdw Aswc Material library Height control (BCS system) Cooling: 3 kW chiller Extraction: available Control cabinet: complete Accessories: various tools, clamping devices, small parts Reason for sale: No longer needed Special features: Private sale → no VAT, no guarantee

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Dolhjw U Dtvjcdw Aewc Sheet width: 105 ??? 500 mm Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder