Used Punch presses with 36-55t punching force for sale (22)

Condition: new, Hydraulic, mobile hole punching machine model PP50 For punching sheet metal, flat steel and steel profiles Technical data: punching force 500 kN Max. Punching capacity Ø 27 in 13 mm Cgshx Dofdgidjifuet Throat 130 mm Engine power 2,2 kW Stroke rate with 20 mm stroke 25 min maximum stroke 30 mm Weight 295 kg Standard version or press version available

Condition: used, Punching force: 500 kN Throat: 610 mm For example, punch a 30 mm hole in 15 mm steel Cgshx Dev Rfl Ijifust Stroke triggering via foot switch Assortment of tools is included in the price

Condition: as good as new (ex-display), Year of construction: 2024, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Cgehx Difowa Sutsujt Weight 295 kg

Condition: used, Year of construction: 1984, Punch power 400 kN table surface area ca. 1250 x 700 mm throat 500 mm hole punching press: capacity (dia. x thick.) 100 x 3 mm hole punching press: capacity (dia. x thick.) 75 x 4 mm hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel 700 mm y-travel 470 mm total power requirement 4 kVA Cjhx Diovb I Imofusgt weight of the machine ca. 2 t dimensions of machine L x W x H 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 662210191, total height: 2,000 mm, overall weight: 1,300 kg, total width: 820 mm, total length: 1,380 mm, The DURMA P 55 hydraulic metal slotting machine was manufactured in 2010 by the renowned DURMAZLAR brand. Technical parameters: - table dimensions: 550x510 mm - reach: 510 mm - hole diameter fi 40 mm in 10 mm thickness - hole diameter fi 20 mm in 20 mm thickness - stroke: 60 mm Cshxsvb Ia Aj Difuegt - cycles per minute: 37 - engine power: 5.5 kW - tank capacity: 76 l - machine dimensions (length x width x height): 1340x1850x930 mm - machine weight: 1300 kg

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, throat depth: 750 mm, punching force: 55 t, GEKA PUMA 55 / 750E Cgjhx Difevt Akmsuot punching machine with options included 1. Mutli- stop table 2. 100mm punch / table equipment yom 2003

Year of construction: 1982, Condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min - throat 760 mm - Installation height 215 mm - working height 1150 mm Cgshehkr Daex Difujt - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces div. hole punches + dies

Condition: used, Max. punching force: 500 kN Throat: 610 mm Cgehx Difou T Nv Djujt Including assortment of punches and dies Weight: 1700 kg

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, total height: 1,800 mm, overall weight: 1,200 kg, total width: 800 mm, total length: 1,300 mm, throat depth: 500 mm, punching force: 55 t, mount diameter: 40 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, power: 5.5 kW (7.48 HP), Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Cgjhx Dewa Sumeifust Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: used, Year of construction: 1985, Punch power 400 kN throat 500 mm hole punching press: capacity (dia. x thick.) 100 x 3 mm hole punching press: capacity (dia. x thick.) 75 x 4 mm Cohx Dsv Achkeifuegt hole punching press: capacity (dia. x thick.) 30 x 10 mm x-travel re. 1280 / li. 650 mm y-travel 465 mm total power requirement 4 kVA weight of the machine ca. 2,2 t dimensions of machine L x W x H 2,54 x 1,65 x 1,90 m - with DRO on Y-axis Accessories: with various punches and dies

Condition: used, Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm Cgohx Difeb A I Hdouet -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg

Condition: used, Year of construction: 1992, pressure 55.0 t punching cross-cut in cmm 40 in 10 mm punching cross-cut in cmm 20 in 20 mm punching cross-cut in cmm 27 in 13 mm work height max. 1060 mm column arm 500 mm total power requirement 5.0 kW weight of the machine ca. 1320 kg. Cohx Deuxfrnsifuegt range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) current new price approx. 12.000 euros special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Year of construction: 1970, Condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg Cgjhx Deit T Hyeifuot

Condition: new, Year of construction: 2024, punching force: 55 t, PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch Cy7Od27J0W - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø22 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set HOLE PUNCH HKM 55 Diameter Ø Ø 20 x 20 mm at maximum thickness Diameter x thickness (xt) Ø 40 x 10 mm Thickness at maximum diameter Ø 100 x 3 mm Work course 60 mm Number of courses x 25 Groove depth 255 mm Working height 1030 mm FULL MATERIAL SHEAR HKM 55 Round / quadrangular Ø 40- 40 mm ANGLE IRON HKM 55 CUTTING SCISSOR Cgshx Difsvg D Nkouot Upright angle (90°) 120 x 120 x 12 mm Angle bracket (45°) 70 x 10 mm Working height 1130 mm SHEET METAL SHEARS (BLADE CUTTING) HKM 55 Flat sheet 200 x 20 mm Flat sheet 300 x 15 mm Blade length 317 mm Angle cut 80 x 15 mm Working height 900 mm NOTCHING HKM 55 Material thickness 10 mm Width 45 mm Depth 90 mm Working height 900 mm SPECIAL MOLDS HKM 55 U-I profile knives (UPN - IPN cut 120 x 58 mm T profile blades 80 x 9 mm Special notch set 100 x 100 x 10 mm V crimping 250 x 12 mm Maximum llama crimping V crimping 500x3 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x8 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 55 Engine power 5. 5 kW Weight 1520 kg Machine dimensions (LxWxH) 1500x950x1880 mm Pressure 55 tons

Condition: used, pressure:50 t throat:350 mm dayligth:500 mm total power requirement:3 kW Cgohx Diforqiuheuot dimensions of the machine ca.:1500 x 850 x 2000 mm weight of the machine ca.:1700 kg

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Cgehx Disu Hza Dofuet Stroke triggering via foot switch Assortment of tools is included in the price

Condition: new, New in Ready for delivery except for the sold. Combined hydraulic shear with 5 working stations, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, foot pedal, centralized lubrication system, working light. Machine supplied with safety guards according to EC regulations, EC declaration of conformity, user manual. Power : Ton 45. Engine power : 4 Kw. Dimensions : mm 1.450 x 900 x 1.450 mm ( L x W x H ). Weight : 1.215 Kg PUNCHING : Punching capacity : mm Ø 22 x Thickness 15 mm. Recess depth: mm 175. Punching stroke : mm 50. Working height : mm 935. SHEARING : Plates : Cehogygfvsx Difusgt mm 200 x 15. mm 300 x 12. Length of blades : mm 316. Round bars : mm Ø 30. Square bars : mm 45. 90° corner profiles : 100 x 100 x 10 mm. 45° corner profiles mm 70 x 70 x 6 SKIRTING : Max thickness : mm 8. Width : mm 35. Depth : mm 75. Working height : mm 935.

Condition: used, Year of construction: 1999, sheet width 500 mm plate length 1000 mm plate thickness max. 6,0 mm pressure 28,0 t throat 500 mm height of stroke 0 - 40 mm working area X = 1200 mm working area Y = 570 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm work height max. 900 mm oil volume 50 l total power requirement 4,0 kW weight of the machine ca. 2500 kg range L-W-H 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request - in checked condition - machine video - youtube.com/watch?v=VU9BWm7SC2g The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Cgehx Dot Ev Hnjifuet Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y positioned accordingly and the material pushed to the stops. Through Pressing the foot pedal will then punch the hole Features of the machine: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Furnishing: - robust electro-hydraulic hole punch - TRUMPF tool system with many application tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * scanning head integrated in the stops * Energy chains for supply cable to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Staking device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single and continuous stroke - stepless lifting height adjustment - 1x pallet/box with application tools - freely movable foot switch * Machine link: mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 9412165

Condition: refurbished (used), Year of construction: 1991, Functionality: fully functional, punching force: 50 t, stroke distance: 60 mm, material thickness: 15 mm, punching diameter: 100 mm, punching pressure: 50 t, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm Cgjhx Dovdiduoifujt - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Year of construction: 2017, Condition: as good as new (ex-display), Punch Durma P 55 Exhibition machine Type: Durma P55 Year of manufacture: 2017 Demonstration machine Cgjhxsm Ak R Aj Difujt Strokes per min.: 37 Punching diameter max: Ø 40x10mm Ø 20x20mm stroke: 60mm strokes per min. at 20mm stroke: 37/min

Condition: used, machine/vehicle number: 0143179661119, pressure:45 t stroke:22 mm Punching capacity-hole dia.:30 in 12 mm Punching capacity-hole dia.:24 in 15 mm dayligth:250 mm throat:400 mm Cohxorqitvs Difusgt total power requirement:5,2 Amp weight of the machine ca.:1500 kg

Condition: used, Punching force: 500 kN Punches e.g. a 20 mm hole in 18 mm steel Cjhxjranq Hs Difujgt Stroke triggering via foot switch Assortment of tools is included in the price