Drill Grinding Machine

HBM PP-U5

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, power: 33 kW (44.87 HP), overall weight: 1,570 kg, fuel type: diesel, color: original, axle configuration: 1 axle, fuel: diesel, Schliesing 325EX‑D chipper: The compact one with a rotating chipping unit The Schliesing 325EX‑D chipper is a powerful wood chipper that is ideal for demanding wood chipping applications with its powerful motor, flexible feed options and robust design. With a pivoting feed hopper and a variety of safety features, it meets the highest standards and offers an efficient solution for processing logs up to a diameter of Ø 20 cm. Technical data: Type: Schliesing 325 EX Logs: Up to Ø 20 cm Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Ihjdpjv Ev E Ujfx Ahyst Engine and chassis: Water-cooled, Stage V 4-cylinder Kubota common rail turbo diesel engine with DPF, output 33 kW / 44.9 HP. Industrial freewheel clutch between engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with EU homologation. Robust, fixed sheet steel fenders. Device for support wheel at the front and parking support at the rear. Lighting in accordance with StVZO with impact-protected components. Pneumatic tires 205/65 R15C with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth. Fully galvanized hopper flap for durability. Hopper dimensions (inside): width = 1,040 mm, height = 960 mm. Pivoting blow-out pipe with adjustable spreading flap. Blow-out pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping mechanism: Rotatable chipper housing with adjustable input angle of 270°. Safety circuit in accordance with EN 13525. Chipping disk with a diameter of Ø 655 mm and a thickness of 35 mm. Closed blade system for quick and safe blade changes. Continuously adjustable chipping knives, can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size. Fill level indicator for the hydraulic oil tank.

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Iodpfx Ajuzlh Iehyoht

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm Iedpfx Aheby Stpoyeht • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right Ijdochhfuopfx Ahyjht cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Ihedpfxjw I A Uxj Ahyst Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? Ihjdpfx Ahjwbh Ifsyot We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Ihedpfefbbx Rex Ahyjt Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: used, Wheel diameter: 500 mm Isdpfxjwl D S Uj Ahyoht Storage location: Nattheim

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm Ihsdpfx Aerz Nqaehyst carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: new, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Isdpfx Ahsgtm U Asyjht Common motor power of 2 grinding aggregates: 11 Kw Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES