Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
1 pcs. Stainless steel tank with large trapdoor and 3 extraction points by fork lift and stackable. additionally stapler capable collecting container made of stainless steel (not shown) Fasungsvermögen 1,000 liters operating pressure 0.1 bar for hazardous substances of Class 3 6.1 b and c weight 212 kg Tank drip tray about 240kg X0pnsxt83 more
2
melting pot, cylindrical, 450 liters, stainless steel, double jacket heatable by water, upright on legs was in use for melting of lard Mt8keg suitable for use in food more
5
Stainless steel tank approx. 500 litres without stirrer diameter 800 mm, usable height 900 mm Baijflrk37 more
6
Used heiz-/ kuehlbarer stainless steel tank with agitator Volume: 1000 L Type: Standing on feet Material (media contact): AISI316 / V4A stainless steel Number the fixations: 4 feet Bottom: conical bottom Topsoil: Flat with lift-up lid Operating pressure containers according to the nameplate: atmospheric Dimensions tank: Ptilg3 Distance from drain to the ground: 165 mm Outside diameter: 1090 mm Total height: 1850 mm Total width: 1190 mm Height of feet: 510mm Level: 250 x 300m... more
3
Unimix SRA 800, made by Haagen + Rinau, Masch.No: 8373493 Volume: 800 ltrs., Double Jacked: 60 ltr., Inside Presure +6/-1 bar Paddle Agitator : 4,4/7.5 Kw, 400 V. Homogenizer : 9.5/11 Kw., 400 V. Bkxacv9 Made of SS 304 Weigth total: 2600 kgs., High: 2250 mm Unit is in good working Conditions, used for Cremes and Lotions in a Pharma Production more
1
Tanks from V4A, pressure 0.5 bar, mobile on four wheels, Vr3crm Manhole above. Spout, available. more
3
Cat-Nr 10-1308(108) Bvupr with Spare Parts and with Dosing Pump Hydrogen Peroxid Electrical Switch Board Measurements: DxH: 220 x 240 x 360 cm avaiable: 1 more
4
cylindrical stainless steel tank upright on legs, double jacket to cool and heat, propeller agitator on side, hermetically welded stainless steel insulation, manhole in top end, ventilation, run-out on side of underfloor V2A Heatable Tank propeller agitator, capacity 0,5/2,6 kW, 480/970 rpm Kvprt double jacket insulation manhole cipable ca. 1.350 mm 2.350 mm 3.200 mm DN80 2 pieces more
6
Used stainless steel IBC 2 pieces available Article ID: 10178 Last purpose: Chemistry, tank cleaning Volume: 1000 liters Type: Standing in galvanized stack frame 9v9x7k9us Material (media contact): 1.4301 / AISI304 Design: Single-walled Floor: Arched Top shelf: Arched Working pressure according to the technical description: + 0.65 bar Dimensions tank: Total width: 1150 mm Overall length: 1150mm Total height: 1300 mm Materials: Inside: 1.4301 / AISI 304 external parts: ... more
2
Cat-Nr 10-1310(110) Diameter: 200 cm Height: 240 cm With Pump and Electrical Switch Board Measurements: DxH: 200 x 240 cm Wbt7zjmy available: 1 more


Containers
every day

New machines via email!

Be informed!
2
18100 l Steril Tank cylindrical insulated stainless steel tank, upright, double jacket, weight: 3950 kg charging room: compression-/vacuum proof +4/-1 bar inspection pressure 6,5 bar, working temperature 145 °C steel grade 1.4435 boiler room: compression-/vacuum proof +4/-1 bar inspection pressure 6,5 bar working temperature 145 °C capacity 230 ltr, steel grade 1.4404/316 l Q07muonb8 2 tanks available more
6
Product name: Used stainless steel container / transport containers / IBC Article number: 10156 Several hundred pieces available 7ahbf8ko2 Last intended use: solvent Rest emptied Volume: 800 litres Type: Standing in galvanized stack frame Material (media contact): 1.4301 / AISI304 Design: Single-walled Floor: Arched Top shelf: Arched Working pressure according to the rating plate: + 0.1 bar Dimensions tank: Total width: 1200 mm Length: 1100mm Total height: 1400 mm Mate... more
6
Used PE storage tank Volume: 1000L Type: Standing on flat bottom Material: PE Bottom: flat Top: Conical Pressure in tank: ATM Extras: 1x Flange Ø 285mm, 1x Flange Ø=50mm, 1x Flange Ø=63mm, 1x Flange Ø=75mm, 1x 2“, 1x thread Ø=90mm Dimensions of tank: Diameter: 950mm Height: 1800mm 07e9waav7 Material: Inside: PE Outside: PE Nameplate: yes No outlet, chemical storage tank more
6
Used stainless steel tank Last use: storage tank for water Volume: aprox 1000L Type: standing on 4x feet Material: AISI304 E28tri2 Bottom: dished Top: dished Extras: 3 Flange, 2x Ø 145mm, 1x Ø95mm Dimensions of tank: Inside diameter: 940mm Height of feet: 1010mm Height outlet to floor: 375mm Total height: 2250mm Outlet: Flange Ø 90mm more
6
Used pressure vessels Article number: 10165 Last purpose: Pharmacy Kffspd9d Volume: 1.4 litres Type: Standing on feet Material (media contact): AISI 316 stainless steel Ground: flat bottom Topsoil: Torispherical head Working pressure according to the type label:-1 / + 6 bar Maximum operating temperature: 60 / + 150 ° C Dimensions tank: Inside diameter: 90mm Outside diameter: 110 mm Distance from drain to floor: 60 mm Total height: 190 mm Total width: 140 mm Materials: ... more
6
Used pressure vessels Article ID: 10160 Last purpose: Pharmacy Volume: 415 l Type: Standing on wheels Material (media contact): 1.4571 stainless steel Number the fixations: 4 rolls Floor:-Torispherical head Topsoil: Torispherical head Working pressure according to the rating plate: + 0.5 bar Extras: on trolley Dimensions tank: Inside diameter: 660mm Fmq9hsg7 Outside diameter: 680 mm Height of the rolls: 210mm Distance from drain to the ground: 260 mm Total height: 1460 m... more
6
Used beater tank Article ID: 10172 Last purpose: Pharmacy Volume: 1000 L Type: Standing on feet Material (media contact): 1.4301 stainless steel Number the fixations: 3 feet Ground: flat bottom Top shelf: Lift-up lid Operating pressure according to name plate: atmospheric Agitator: Number: 1 Type: Propeller Position motor: topsoil Speed: 700 / 1410 RPM Power: 2.2 / 3,4KW Electrical voltage: 3PH 400V Pole change-over bar Dimensions tank: Inside diameter: 960mm Distan... more
6
Used pressure vessels Article number: 10168 Last purpose: Pharmacy C2g78y3c Volume: 3 litres Type: Standing on feet Material (media contact): AISI 316 stainless steel Ground: flat bottom Topsoil: Torispherical head Working pressure according to the type label:-1 / + 6 bar Maximum operating temperature: 60 / + 130 ° C Dimensions tank: Inside diameter: 148mm Outside diameter: 150 mm Distance from drain to floor: 60 mm Total height: 250 mm Total width: 170 mm Materials: ... more
6
Werksneuer stainless steel agitator vessels Type: PLRWP1000 Volume: 1000L Type: Building shape galvanized stack frame in design: single-walled Fgncuiqca Wall thickness: At least 2 mm Material (media contact): 1.4301 stainless steel Finish: Satin exterior, inside BA Weld: Pickled and passivated, interior exterior satin Operating pressure: Atmospheric Topsoil: Torispherical head Underbody: Torispherical head with outlet beading Dimensions tank: Total width: 1135x1135mm Containe... more
6
Werksneuer stainless steel agitator vessels Type: PLRWP1000 Volume: 1000L Type: Building shape galvanized stack frame in design: single-walled Wall thickness: At least 2 mm Material (media contact): 1.4301 stainless steel Finish: Satin exterior, inside BA Weld: Pickled and passivated, interior exterior satin Operating pressure: Atmospheric Topsoil: Torispherical head Qqzs0z8 Underbody: Torispherical head with outlet beading Dimensions tank: Total width: 1135x1135mm Container ... more
6
Werksneuer stainless steel containers Type: SBPA650 Volume: 650 litres Erqausf7a Type: Building shape on pallet Version: Wall, 2mm wall thickness Material (media contact): 1.4301 stainless steel Finish: Satin exterior, inside BA Welds inside: pickled and passivated Operating pressure: Atmospheric Top shelf: Open with edge reinforcement Underbody: Torispherical head with outlet beading Dimensions tank: Container diameter: 1080 mm Total height: 945 mm Range: 1150 x 1200mm F... more
6
S-INOX-100 L-MSK Werksneuer stainless steel mixing tank Food-suitable Volume: 100 L Mass approx.: Ø 500mm x cyl. Height 550mm Total height: 900 mm Material: 1.4571 stainless steel V4A Surface: IIIc / 2B, pickled and passivated Maximum operating temperature: 80 ° C Operating pressure containers: ATM Welds in the tank plate just sanded, brushed exterior -Standing design on three feet -Top shelf: Lift-up lid, 1/2 folding, welded 1/2 fixed -Underbody: Torispherical head with forward of ... more
6
Factory-new stainless steel stand tube Type: MTLA1000 Daad0p3ck Nominal volume: 1000 liters Volume: 904 liters Type: Building shape on feet Version: Wall, 2mm wall thickness Material (media contact): 1.4301 stainless steel Finish: Satin exterior, inside BA Welds inside: pickled and passivated Operating pressure: Atmospheric Top shelf: Open with edge reinforcement Underbody: Torispherical head with outlet beading Dimensions tank: Container diameter: 1080 mm Total diameter: 11... more


Containers
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close