Used Bench Planer for sale (3,748)

Condition: excellent (used), Catalog number: 8118 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - cutterhead guard * from top to bottom: - infeed rollers - toothed infeed roller - planing roller - smooth outfeed roller * with horizontal drilling machine: Nljdpfx Aoz Nkbyei Aoh - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - feed adjustment (front/back) with drilling machine - table adjustment (up/down and sideways) - adjustable roller in the lower table - 2 feed speed settings 8/12m/min - main motor 4kW - dimensions (L/W/H) 1800x1350x1150mm - weight 650kg Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Number of spindles: 4 spindles (bottom/right/left/top) Electric height adjustment of the upper spindle with feed Maximum working width: 180 mm Maximum working height: 105 mm Minimum workpiece dimensions: Width: 23 mm / Height: 6 mm Nlsdpe Abazljfx Ai Ash Feed rate: 6 and 12 m/min (two-stage switchable) Spindle diameter: 35 mm Axial spindle adjustment: Max. 15 mm (for profiling) Spindle speed: 6,000 rpm Infeed table length: 2,300 mm Machine weight: approx. 1,200 kg Dimensions (L x W x H): approx. 2820 × 1220 × 1920 mm Location: Nattheim

Condition: excellent (used), Planer width 510 mm Min/Max. working height 3 - 240 mm Nledpfo Aaw H Nex Ai Ash Motor power 4.0 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planer knives 4 pcs Dimensions of thickness table 510 x 850 mm Feed speed 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 120 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Articulated pressure bar 2 pcs under-table rollers Low-voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the Machinery Ordinance 1 set of spare planer knives Dimensions approx. L x W x H = 1000 x 900 x 1450 mm Weight approx. 900 kg Note regarding used machines: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works and include free loading. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address and telephone number!)

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four-sided planer Nedsg Sa R Dspfx Ai Aslh Planing width: 170 mm Planing height: 120 mm Number of spindles: 7 Spindle arrangement: bottom/right/left/right/top/bottom/universal Electric height adjustment Feed rate: 6.5 to 45 m/min Drive for feed rollers: cardan shafts 11 pull rollers from above

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition Nledpfx Aorigxyei Ash

Condition: used, Weinig Powermat 1200 automatic planing and moulding machine for planing and profiling solid timber in a single operation. This high-performance machine, featuring seven spindles, enables precise machining of all four sides of the workpiece as well as complex profiling at high feed rates. Ideal for demanding applications in the window, door, moulding and structural timber sectors. Technical data: - Spindle 1: Bottom / 15 kW / 50 mm / 8,000 rpm - Spindle 2: Right / 15 kW / 50 mm / 8,000 rpm Nodpfx Aioz Ttfpo Aslh - Spindle 3: Left / 15 kW / 50 mm / 8,000 rpm - Spindle 4: Right / 15 kW / PowerLock / 8,000 rpm - Spindle 5: Left / 15 kW / PowerLock / 8,000 rpm - Spindle 6: Top / 18.5 kW / PowerLock / 8,000 rpm - Spindle 7: Bottom / 22 kW / PowerLock / 8,000 rpm - Spindles: 7 - Working width: 230 mm - Working height: 160 mm - Feed rate: 36 m/min - Feed motor: 7 kW - Control system: PowerCom Plus - Table: Marathon Coating - Driven table rollers: 3 - Axial CNC spindles: 4+5 - Radial CNC spindles: 3+4+5+6

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - Shaft width: 410mm - Bed length: 2220mm - Cast iron beds - Both beds are adjustable - Original cast iron guide - Motor: approximately 3kW - Dimensions (L/W/H): 2220x800x1140mm - Weight: 504kg Njdpezrlb Uofx Ai Aolh ADVANTAGES – German-made – Used surface planer – Very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1992, completely shut down used Nsdpfxsz Np I Ej Ai Aelh good condition cleaned functionally tested partially overhauled Manufacturer: Martin Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Nljdpszrulcefx Ai Aoh Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Bench Foods 32VCUD 32 tray vertical dehydrator Njdpfjyziiwex Ai Aelh Stainless, adjustable temperature range from 15'c to 90'c plus an ambient air mode, timer controls, stainless mesh trays for even drying on both sides, mobile, 1Ph

Condition: good (used), functionality: fully functional, overall weight: 1,500 kg, Utis precision thickness gauge with articulated pressure bar, electric table adjustment, rubber draw-off roller 700/230 mm, 4 feed speeds via gearbox. Nlsdpfxsz Iuf Es Ai Ajh

Condition: used, SCM F410 Jointer 4-knife cutterhead Nedpfx Aez Szbcsi Ajlh Fence with comb guides Width 410 mm Table length 2600 mm Adjustable infeed table angle Well-maintained machine, quiet operation

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft Nodpszu Sgpefx Ai Aolh - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: like new (used), SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: - Spindle 1: Bottom / 4 kW / 40 mm - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 4 kW / 40 mm - Spindle 5: Universal / 4 kW / 40 mm - Spindles: 5 - Working width: 230 mm - Working height: 120 mm - Feed: 3 kW Nsdjz Nyfzjpfx Ai Aslh - Planing table length: 2,000 mm

Year of construction: 1998, condition: used, Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible. Nsdpfxj Adt Hme Ai Aelh

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Nodpfxjxn Uptj Ai Aelh

Condition: excellent (used), CATALOG NUMBER 7479 Technical specifications: - Shaft width 410mm - 4-knife shaft (TERSA) - Noise reduction comb - Shaft guard - Table length 2610mm - Longer infeed table 1435mm - Cast iron tables - Both tables adjustable - Original, adjustable cast iron guide, angle adjustable - Brake - Diameter of dust extraction outlet 115mm - Motor 4kW - Dimensions (L/W/H) 2610x960x1110mm - Weight 578kg ADVANTAGES Nlodpjzx Sznefx Ai Ajh – Made in Italy – 4-knife shaft – brake – Noise reduction comb – longer infeed table – unpainted – Used planer, very good condition, original DTR documentation Net price: 21900 PLN Net price: 5093 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2000, Working width: 500 mm Motor: 5.5 kW with motor brake Tersa cutterblock, Z=2 Speed: 5,000 rpm max. Nlsds Aay D Depfx Ai Aeh Maximum chip removal: 8 mm Adjustable planer table with motorized height adjustment Angled fence with integrated auxiliary fence Suvamatic cutter guard Weight: approx. 1000 kg Dimensions: 2850 x 850 x 1110 mm Location: Supplier

Condition: excellent (used), CATALOGUE NUMBER 7587 Technical specifications: - Shaft width 410mm - Number of knives 3 pcs Nljdpjzx Srmefx Ai Ash - Brake - Table length 2540mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron guide, adjustable at an angle - Motor 3kW - Dimensions (L/W/H) 2540x1000x1050mm - Weight 730kg Advantages: – Made in Poland – 3-knife shaft – Used thickness planer – Very good condition Net price: 7900 PLN Net price: 1840 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, working width 510mm Nsdpfxj Aay H Ej Ai Ajlh 4-knives shaft tables length 2250mm motor power 7,35kW angle regulated fence year 2008 iron cast tables

Condition: excellent (used), CATALOGUE NUMBER: 7915 TECHNICAL SPECIFICATIONS: Shaft width: 640mm Number of knives: 4 pcs Maximum thickness of the workpiece: 200mm – Top: Latches/deflectors Toothed infeed roller, pulling Pressure roller Planing roller Pressure roller Smooth outfeed roller, pulling – Bottom: Adjustable rollers in the lower bed: 2 pcs Nedpfx Aiezrltqj Ajlh Motor: 7kW Infinitely variable feed speed control Dimensions (L/W/H): 1800x1250x1150mm Weight: 1250kg ADVANTAGES: – Bulgarian production – Infinitely variable feed speed control – Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Second-hand Format 4 Type Plan 51 surface planer for planing timber workpieces. Technical data: - Motor: 10 kW - Blade shaft: Reversible blades Z4 - Working width: 510 mm Nledjz Sqviopfx Ai Aoh

Condition: excellent (used), Catalog number 8116 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm * From top to bottom: - Ratchets - Toothed infeed roller, pulling, helical - Pressure roller - Planing roller - Pressure roller - Smooth outfeed roller, pulling - Motor: approx. 4kW - Manual table lifting - 2 feed speeds: 8/12.5 m/min - Diameter of dust extraction outlet: 130mm - Dimensions (L/W/H): 970x870x1300mm - Weight: 620kg Nsdpfxsz Nhrij Ai Aelh ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 1974, condition: good (used), Planing width mm 170 Nedpog Sa Iwefx Ai Aslh Planing height mm 140 Number of spindles 5 Spindle arrangement: bottom/right/left/top/universal Spindle diameter mm 40

Condition: excellent (used), CATALOGUE NUMBER 7990 TECHNICAL DATA - Shaft width 630mm - Max thickness of workpiece 200mm – Top: - Ratchets - Toothed feed roller - Pressure rollers - Planing roller - Pressure rollers - Smooth withdrawal roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor approximately 5.5kW - 2 feed speed settings - Feed motor 0.55kW Nodpfx Aoztxgaji Aslh - Dimensions L/W/H 1200x130x1100mm - Weight 1093kg ADVANTAGES - German-made - Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)