Surface planer

Martin T 54

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: Kdedpjpq If Dofx Ap Dou T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Kodpfxsytp Hre Ap Dedu

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Kdedopgkmwopfx Ap Dou Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area Kdsdszx Ennspfx Ap Deu fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, HOLZ-HER EVOLUTION 7405 (2021) – Like New! Only 202 Working Hours HOLZ-HER EVOLUTION 7405 vertical CNC machining center for sale. Excellent condition, barely used, fully operational under power. Quick Specs: - Year of manufacture: 2021 - Active milling hours (Vorschub aktiv): ONLY 202 hours! Kodozutd Nopfx Ap Djdu - Total machine uptime: 1,860 hours - Serial No: 1195/2-109 - Made in Austria (CE) Features & Software: - HOLZ-HER CAMPUS / HOPS active / Betternest - Vacuum-free automatic panel clamping system - Complete 4-side routing, drilling, and grooving - Compact vertical design (under 5 m² footprint)

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg Kedpfx Apjqlck Ns Dodu - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it. Kdedpjz D U A Ajfx Ap Dsu

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Kdodpfeza U H Rsx Ap Dou Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! Kdodpfx Apezv Tibo Dsu OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Kdedpfezvflnsx Ap Deu Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service