Used Martin T 54 for sale (84)

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: Lsdjpgkmwopfx Afkjhn T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 Lsdpopq If Dofx Afkohn T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Max. cutting height [mm]: 550 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Scoring unit: - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 Lhjdpfx Afoxdlx Rekjn - Year: 1996 - Documentation available: No - CE marking present: Yes - Serial number: V233567 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2009, Tilting Panel Saw Martin T74 with 3-Axis Scoring Unit, 3m Table, and Motorized Rip Fence From technical school Control console at eye level with color touch-screen control Sliding table length 3000mm Saw blade tilt from 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 500mm Saw shaft with Pro-Lock quick-change system Max. cutting height 170mm Cutting width up to 1100mm, electrically adjustable, programmable, and movable by hand Tilt angle and height adjustment electrically adjustable Crosscut fence with 2-point support up to approx. 3350mm Parallelogram cross table with digital angle display Foldable rip fence Extraction ports 120 + 100mm Sliding carriage lockable in any position Ergonomic handle 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scoring unit, fully adjustable electrically while the machine is running 2 protective hoods Tool compartment Emergency stop switch Lhjdpfxexp Rmdo Afkjn Operating manual CE mark Machine shows minor signs of use on the anodized sliding table. Small cuts in the sliding table have been repaired. Original paint, only spot retouched in places. Excellent condition from technical school as visible on original photos. Dimensions approx. 3150 x 3600 x 1700mm (LxWxH). Weight approx. 1950kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see "more offers from this seller."

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Ledpfx Afsv Ai N Uskjhn Storage location: Nattheim

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Ljdot U Rn Sjpfx Afkjhn Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: used, Panel Saw Martin T 75 Prex Heavy-duty precision panel saw - double-sided tilting 5.7" touchscreen axis positioning control Motor 7.5 kW Scoring unit / prepared Max. cutting height 204 mm, saw blade Ø 250 - 550 mm Saw blade tiltable -46° to +46° Height and tilt adjustment via control Parallelogram cross table, for double-sided tilting up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Table length 3200 mm Cutting width with rip fence 1100 mm Lhodpfx Afsxqm Rzsksn Automatic width adjustment via axis positioning control Swiveling control panel on table Longitudinal fence - DIGITAL CE-certified Machine from lease return, workshop overhauled in TOP CONDITION Available from stock in Lieboch / Leasing option possible

Condition: used, Year of construction: 1978, functionality: fully functional, Planer type T 51 B, year of manufacture 1978, table length 2500 mm, working width 500 mm, table height 850 mm, maximum cutting/rebate depth 16 mm, hydraulic adjustment, cutterhead speed approx. 5000 rpm, 2-knife cutterhead, 4.8 kW motor, eddy current brake, jointer fence, auxiliary fence, weight approx. 950 kg. Machine subject to differential taxation. Lodjxf Hq Djpfx Afkshn

Condition: used, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Weight: 900 kg - Main motor power [kW]: 5.5 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Dust extraction nozzle diameter [mm]: 140 - Options: Scoring unit - Scoring unit: 1 - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Documentation available: No Lhodpfx Aownh S Djfkon - Serial number: V024400 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: V 157070, total width: 900 mm, total height: 1,500 mm, total length: 1,000 mm, planing width: 630 mm, height adjustment type: electric, overall weight: 980 kg, planing height: 250 mm, chip removal: 6 mm, planer shaft diameter: 110 mm, rotational speed (min.): 5,000 rpm, working height: 250 mm, input voltage: 400 V, Equipment: motor brake, Martin Dickte T 43 with Tersa planer blade 630mm, function-tested, good condition, available around mid-July 2025, pick-up from Sennfeld location. Lsdpfxswqfhus Afkjhn

Condition: used, Year of construction: 1995, With scoring saw, sliding carriage, 3300 mm cutting width, 1050 mm motor, 5.5 kW, rear parallel stop manually lowerable, digital displays for tilt, parallel stop, and cutting height with handwheel adjustment of the parallel stop. Storage location: Nattheim Lhedpfswbfyxjx Afkon

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides Lodpfx Aew D T Dkefkshn T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg Lsdpfownbfksx Afkehn

Condition: excellent (used), Year of construction: 2011, Panel Saw Manufacturer: Martin Model: T 60 Year of manufacture: 2011 Sliding Table Length: 3,000 mm Cutting Width: 856 mm Max. Cutting Height: approx. 130 mm Power: 5.5 kW Speed: 4,000 / 4,800 / 6,000 rpm Max. Saw Blade Diameter: 250 – 400 mm Lhedpjwxxhqjfx Afkon Rip Fence Tiltable 45° on Both Sides Scoring Unit: No Height and Angle Adjustment: Electric Motor Brake: Yes Weight: 1,350 kg

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Lhjdpstxirfjfx Afken

Condition: used, Year of construction: 1978, spindle tilting: yes 0 - 45° height adjustment: manual tilting adjustment: manual fence adjustment: manual Lodpfxsuzkxfe Afkehn read out height : - read out tilting: Scala read out fence: Scala sawblade diameter: 30 mm speeds: 3000, 4500, 6000, 9000 motor power: 5 kW motor brake: yes, feed brake suction connection: 2 x 100mm machine length: 1200mm machine depth: 1400mm weight: 800kg

Year of construction: 2005, condition: ready for operation (used), Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible. Lodpjw S Txvefx Afkehn

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod Lhodpfxsr Hr D Ns Afksn T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm Lodpfxohfufge Afkshn -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: reconditioned (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 116680, Connected load 380V 11A planing width 630 mm planing height 250 mm feed rate 8-20 m/min suction socket 160 mm weight approx. 870 kg rubberized infeed and outfeed roller Lhjdoh U A Evjpfx Afken two-knife shaft with strip planing knives Central lubrication Planing height via handwheel adjustment Star-delta switch

Condition: good (used), Year of construction: 2000, Sizing saw with scoring unit Lsdpfx Afstw Hd Askshn 3 m sliding carriage Digital displays Width adjustment is no longer motorized Height adjustment converted to foot hydraulics Clamping beam not included in the price

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Lhodpfsmmb Acsx Afkjn Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, total width: 1,200 mm, total height: 1,200 mm, total length: 1,200 mm, planing width: 630 mm, overall weight: 1,100 kg, working width: 630 mm, number of planer blades: 2, 2-knife shaft with wedge strips Rubber infeed and outfeed roller Segmented pressure bar Electric height adjustment with digital display 4 feed speeds 6-9-12-18 m/min Extraction nozzle Ø 160 mm Lhedpfxowcn Syo Afkon

Condition: used, with attached sliding tableconstructed with a cross-cut sawused, good condition, poorly usedmanufactured by Martintype T 21brake mechanical foot pedalright hand-left hand rotationtable size l x w 800 x 1000 mmmilling arbor diameter 30 mmcutter fence Holzbackensliding table / sliding tableworkpiece clamp 1 x mechanicalguide fence 1 x 1500 mm, 1 x 1000 mmexhaust connection D 150 mmrequired space ca. l x w x h mm1700 x 1200 x 1300located in 97447 Gerolzhofensale in current condition as seenwithout technical examination- free on truck - Lhjdovwgatepfx Afkon

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Lhjdpsvwfiasfx Afkjn