Used Upper Support for sale (15,562)

Condition: good (used), Upper support Sled width 145 mm Height 72 mm Bolt circle 180 mm Centering pin diameter 70 mm Contact surface 240 x 220 mm Weight 23 kg Shipping dimensions: Dododq Nviopfx Acpscn L 490 mm W 220 mm H 270 mm

Condition: good (used), Upper support Bolt circle diameter 180 mm Dcsdpfx Acsccrqfepon Depth 230 mm Width 600 mm Height 460 mm

Condition: good (used), Obersupport Dedpfob Eyb Aox Acpocn Masse : L.530 x B.270 x H.350 mm

Condition: good (used), Upper support Dcodpfxjb E Nw Ij Acpon Base plate 300 x 320 mm Bolt circle 265 mm in diameter Centering flange 100 mm in diameter Distance from base plate to steel holder: 185 mm

Condition: good (used), Upper support, upper slide, dovetail guide, cross table -Tool slide: from automatic lathe SUGA type STS-2 Dsdpfx Aofnxw Tscpocn -Measurements: see photos -Dimensions: 830/610/H300 mm -Weight: 119 kg

Condition: used, Upper support, upper slide, dovetail guide, tool slide, cross table -Tool slide: from automatic lathe SUGA type STS-2 Dcodpfx Aefnxxfecpjn -Measurements: see photos -Dimensions: 1080/530/H290 mm -Weight: 121 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm Dcodpfx Ajxfzuwocpon -Dimensions: see photos -Dimensions total: 450/155/H110 mm -Weight: 5.4 kg

Condition: used, Upper support, upper slide, dovetail guide -Rezess: Ø mm -Hole circle: Ø mm -Dimensions: 121/295/H200 mm -Weight: 12 kg Dcedjd Ebpmspfx Acpsn

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm Dodjz Npz Ejpfx Acpocn table height 900 mm table width 90.0 mm control DELEM oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request ----- POWER BEND PRO electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Dodpfxozhuuve Acpecn Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: new, mileage: 1 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation Dcedpfxjz Ntcae Acpjn - Twin wheels Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck | 245 HP | Euro 3 | Carrier The Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck is configured for reliable temperature-controlled transport on demanding delivery routes. Its 245 HP Mercedes-Benz six-cylinder Euro 3 engine, 4x4 all-wheel drive and insulated GRP refrigerated body with Carrier cooling system provide a practical solution for professional cold-chain logistics. Key Highlights - Mercedes-Benz Atego 1725A/42 4x4 - Mercedes-Benz 6.4L 6-cylinder Euro 3 engine - 245 HP (180 kW) - Mercedes-Benz G 85-6 manual transmission - Mercedes-Benz VG550-3W transfer case - Front and rear differential locks - Approx. 5,000 mm refrigerated body - GRP insulated sandwich-panel construction - 50 mm side-wall and roof insulation - 80 mm insulated floor - Carrier refrigeration system - Twin insulated rear doors - Aluminium interior floor and cargo lighting - 210-litre fuel tank - Air conditioning Built for Cold-Chain Distribution The refrigerated body uses insulated GRP sandwich panels to help control heat transfer during transport. The side walls and roof use 50 mm insulation, while the floor incorporates 80 mm insulation with a durable aluminium upper surface. Twin insulated rear doors and dedicated sealing support temperature-controlled cargo operations. The 4x4 drivetrain, Mercedes-Benz transfer case and front and rear differential locks provide additional mobility on unpaved roads, loose surfaces and demanding regional delivery routes where conventional 4x2 refrigerated trucks may be restricted. Applications - Food and beverage distribution - Fresh produce and agricultural logistics - Meat, seafood and dairy transport - Remote and regional cold-chain logistics - Mining and construction-site catering supply - Pharmaceutical and temperature-sensitive transport Technical Specifications Vehicle: Mercedes-Benz Atego 1725A/42 Body: GRP Refrigerated Body Drive: 4x4 Engine: Mercedes-Benz 6.4L 6-cylinder Euro 3 Power: 245 HP / 180 kW Transmission: Mercedes-Benz G 85-6 manual Transfer case: Mercedes-Benz VG550-3W Wheelbase: 4,160 mm Internal dimensions: 4,892 x 2,400 x 1,940 mm Refrigeration: Carrier Fuel tank: 210 litres Cab: Mercedes-Benz S-Cab Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania commercial vehicles for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in refrigerated trucks, heavy-duty vehicles and specialised transport solutions, we provide complete vehicle solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Availability: in stock Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg

Condition: new, mileage: 1 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck | 245 HP | Euro 3 | Carrier The Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck is configured for reliable temperature-controlled transport on demanding delivery routes. Its 245 HP Mercedes-Benz six-cylinder Euro 3 engine, 4x4 all-wheel drive and insulated GRP refrigerated body with Carrier cooling system provide a practical solution for professional cold-chain logistics. Key Highlights - Mercedes-Benz Atego 1725A/42 4x4 - Mercedes-Benz 6.4L 6-cylinder Euro 3 engine - 245 HP (180 kW) - Mercedes-Benz G 85-6 manual transmission - Mercedes-Benz VG550-3W transfer case - Front and rear differential locks - Approx. 5,000 mm refrigerated body - GRP insulated sandwich-panel construction - 50 mm side-wall and roof insulation - 80 mm insulated floor - Carrier refrigeration system - Twin insulated rear doors - Aluminium interior floor and cargo lighting - 210-litre fuel tank - Air conditioning Built for Cold-Chain Distribution The refrigerated body uses insulated GRP sandwich panels to help control heat transfer during transport. The side walls and roof use 50 mm insulation, while the floor incorporates 80 mm insulation with a durable aluminium upper surface. Twin insulated rear doors and dedicated sealing support temperature-controlled cargo operations. The 4x4 drivetrain, Mercedes-Benz transfer case and front and rear differential locks provide additional mobility on unpaved roads, loose surfaces and demanding regional delivery routes where conventional 4x2 refrigerated trucks may be restricted. Applications - Food and beverage distribution - Fresh produce and agricultural logistics - Meat, seafood and dairy transport - Remote and regional cold-chain logistics - Mining and construction-site catering supply - Pharmaceutical and temperature-sensitive transport Technical Specifications Vehicle: Mercedes-Benz Atego 1725A/42 Body: GRP Refrigerated Body Drive: 4x4 Dcjdsz Ntb Njpfx Acpsn Engine: Mercedes-Benz 6.4L 6-cylinder Euro 3 Power: 245 HP / 180 kW Transmission: Mercedes-Benz G 85-6 manual Transfer case: Mercedes-Benz VG550-3W Wheelbase: 4,160 mm Internal dimensions: 4,892 x 2,400 x 1,940 mm Refrigeration: Carrier Fuel tank: 210 litres Cab: Mercedes-Benz S-Cab Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania commercial vehicles for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in refrigerated trucks, heavy-duty vehicles and specialised transport solutions, we provide complete vehicle solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Availability: in stock Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm Dcodpfxoz Iy T Ij Acpon number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Djdpfxjzd H U Hs Acpocn Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Djdpfx Aezn Afpjcpscn Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the piping shown in the image, connected to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing section with automatic edge feeding for roll material up to 3 mm Pressing zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, beveling, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a folder All indexable inserts of the milling units and trimming blades have been replaced or re-sharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profile milling unit has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been replaced. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2021, Semi-Automatic and Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operation: Semi-automatic & fully automatic Year of Manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production Speed: Up to 35 loads per hour. Load Capacity: Maximum dynamic load weight: 4,500 lbs – 10,000 lbs static Dedpfx Acewb A N Rjpscn Maximum load size to safely pass through the tower: 67" x 67" (96" load diagonal) x 80" H Maximum load size to remain within the turntable: 46" W x 46" L (65" load diagonal) x 80" H Low-profile turntable: 65-inch diameter, laser-cut steel plate with all-around deck protection. Maintenance-free 54-roller bearing support system. Turntable height 2.813 inches from the ground. ANSI No. 50 direct chain drive with chain tensioner. Rotational speed between 3 and 12 RPM with smooth start acceleration. 1/2 HP AC motor with variable speed. End-of-cycle deceleration and positive stop alignment. Robust all-around deck for turntable protection, 3-sided loading, and pit mounting. Forklift openings at the front and rear for easy movement. Accu-Count precise turntable positioning system for additional film savings! Film carriage lift: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation Features: Fully electric – no pneumatics required. Patent-pending A-arm film cutting and holding device starts and ends the wrapping process at the top of the load. Cousins Smart Engineering has developed an advanced cutting and holding device with the A-arm. It provides significant productivity increases and safety benefits. This technology is only available on Cousins machines. This unique method of attaching and cutting the stretch film offers the following advantages: • Selectable top wrap function • Stabilizes the load early in the wrapping cycle • Places the film end at the top of the load instead of at the bottom • No film clamp on the turntable that can be damaged by dirt or operator error – also, no slip rings are required to power the turntable, reducing maintenance. • Load placement on the turntable is not critical. • No air connections or noisy compressors • New automatic safety feature for load detection during the first revolution detects uneven or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions. • A-arm fall protection Control Functions: Electronic control with LED interface Wireless start/stop remote control with one transmitter (additional transmitters available) On/Off/Reset switch and operating indicator Automatic wrapping cycle start/pause with a single button Cycle pause for applying top sheets Reinforce wrapping control for the center of the wrap Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Control of film tension (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height sensor for dark or shiny loads Separate control for 1 to 12 revolutions of the upper and lower wrap Selectable parameters for reduced film tension for overwrap.

Condition: used, Year of construction: 2005, Manufacturer: OHRA Type: KRAGARM 60 Year of manufacture: 2005 Arm length: 1500 mm Base length: 3300 mm Overall height: 5900 mm Scope of delivery: Base: 9 parts Column: 9 parts Support arm: 72 parts Mounting fork for support arm: 23 parts Upper strut: 8 parts Support arm connector: 240 parts Dodpfx Asz I Sb Rocpjcn Column connector: 24 parts The set is sold as a complete unit.

Condition: used, Year of construction: 2015, gebraucht 2015 080242 prompt, Zwischenverkauf v Türkei 38900 € 1 175 to 3050 mm 4 265 mm 2600 mm 410 mm hydraulisch 120 mm/s 10 mm/s 100 mm/s 18.5 kW 4250 mm 1850 mm 2770 mm 10520 kg 4 axes (Y1, Y2, X, and R-axis) Cybelec DNC 880 S CNC control - 2D graphic display - User-friendly conversational programming - Automatic bending sequence calculation Dodpfx Acez Dra Sopjcn - Automatic calculation of developed length for blank cutting - Product and tool memory - Correction capability - USB ports for backup and program storage CNC-controlled backgauge on linear guide and ball screws Backgauge finger blocks on linear guide CNC-controlled crowning New upper tool 1010/A/75°/0.8/105, sectional and gooseneck New lower tool 2009/85° (V = 16, 22, 35, and 50 mm), sectional Fiessler AKAS laser safety device mounted on the upper beam 2 sheet support arms on linear guides Foot pedal Oil fill Operating manual in German with EC declararation of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Djdpfszfapmsx Acpecn Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,274 h, pressing force: 6 t, total height: 2,580 mm, controller manufacturer: DELEM, controller model: DA-66T, product length (max.): 2,100 mm, number of axes: 6, This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details. • CNC axes: Y1, Y2, X, R, Z1, Z2 • Bending unit: • Max. approach speed: 160 mm/s • CNC backgauge: • CNC-controlled axes: X, R, Z1, Z2 • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 250 mm • R-axis speed: 350 mm/s • Servo-motorized CNC backgauge • X-axis servo motor with ball-screw drive • Z1 and Z2 CNC-controlled backgauge fingers • Backgauge positioning accuracy: up to 0.05 mm • Safety: • Side safety guards • Safety system for bending area • Tooling style: Amada (Promecam) • Electrical: • Main motor power: 7.5 kW • Power supply: 400 V, 3-phase, 50 Hz • Nominal current: 18 A • Control voltage: 24 V Dcedpfsz A Aa Tex Acpsn Additional equipment • Segmented upper punch tooling • Multi-V lower die • Front sheet support table / support arms • Foot pedal control Technical Specification Bending Length 1270 mm

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons)(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pumpt installed Dedpjv Rtg Tjfx Acpecn The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: excellent (used), Catalog number: 8111 TECHNICAL DATA Circular saw: - max. saw blade diameter: 400mm - spindle: 30mm - blade adjustable front/rear - motor: approx. 3.4kW Dcedjz Eaztopfx Acpjn Milling machine: - spindle: - spindle diameter: 40mm - working height of spindle: 180mm - spindle lock - max. milling cutter diameter: 400mm - motor: approx. 7.5kW - 2 types of rotational speeds: 3500, 7000 rpm - electric brake - material clamping on the carriage: pneumatic, from above and from the side - side carriage adjustable up/down, front/rear and at an angle - support extending from the table - angle ruler - diameter of dust extraction nozzles: 80mm, 150mm - dimensions (L/W/H): 2620(162mm)x1960x1700mm - weight: 900kg ADVANTAGES - Polish production - upper control panel - used mortising machine, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt Dcjdpewiatvofx Acpon - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Djdpsvfy Sxsfx Acpocn Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, controller manufacturer: FANUC, number of axes: 4, This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2019. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information. Additional equipment Djdpfx Aezvv Dzecpecn • USB interface • Three-colour signal light • 1 set of soft jaws • CHIP CONVEYOR HS with lateral ejection • Transformer incl. cable • Manual compressed air gun • Bar feeder interface // Bar loader interface • Parts catcher main spindle • Parts unloader: Parts unloading system for the counter spindle incl. parts conveyor belt • Workpiece ejector / Workpiece drm: 230 mm / Workpiece X: 673 mm Machine Benefits Technical Machine Benefits • Linear (z) and flat-guided (x/y) 45 degree • Turning Ø: 230 mm // turning length: 673 mm • Chuck size both spindles: 8 inch (~210 mm) • Turret c-axis, 0. 001° // turret y-axis, +- 50 mm - upper turret • Driven tools: 5000 rpm, 5. 5 kw • 1 x axially driven tools // 1 x radial driven tools • Automatic tool probe • Coolant tank 270 litres // standard coolant nozzle • Internal cooling 30 bar • 30 bar coolant pump (60hz) Extra Information Strongly reduced interference contour Better workpiece accessibility Workpiece stabilization through axial pull against workpiece stop Chuck Type: SPANNTOP mini Chuck Model: Axzug Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 155.00 mm Frontal Diameter: 111.00 mm Maximum Outer Diameter: 165.00 mm Clamping Position: 65.00 mm Clamping Device Thread: M102x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A054288.0009C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M102x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 65.00 mm Maximum Actuation Force: 65.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-HSP Connection [of Pull Tube]: External Thread Thread Designation: M74x1.5 Thread Length: 40.00 mm Front Position Pull Tube: 57.50 mm Stroke of Clamping Cylinder: 17.50 mm Spindle Bore Diameter: 76.00 mm Pull Tube Inner Diameter: 66.00 mm SPANNTOP mini Axfix 65 KK6 Chuck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 huck Type: SPANNTOP mini Chuck Model: Axfix Chuck Size: 65 Short Taper Standard: DIN ISO 702-1 Short Taper Size: Size 6 Length of Clamping Device: 138.00 mm Frontal Diameter: 119.00 mm Maximum Outer Diameter: 167.00 mm Clamping Position: 50.00 mm Clamping Device Thread: M94x1.5 Basic Stop Design: Clamped Actuation Type: Power-actuated Additional Chuck Options: Yes Front Stop Mounting: Yes Balance Quality: 4.0 Pull Tube Adapter according to Drawing For Clamping Device [ZCHN]: A071618.0004C Connection [of Clamping Device]: Internal Thread Clamping Device Thread Designation: M94x1.5 Clamping Device Thread Length: 17.00 mm Thread Position Clamping Device: 50.00 mm Maximum Actuation Force: 45.00 kN Machine Manufacturer: Hyundai WIA Machine Designation: LM1800TTSY-GSP