Used Martin T 71 for sale (102)

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cutting length: 2700 mm - Cutting width: 1050 mm Chsdpfxozyy Dao Aqved - Cutting height: approx. 145 mm - Motor: 5.5 kW - 2,800 - 4,000 - 5,500 rpm - Hydraulic lifting, lowering, and swiveling of the saw unit up to a maximum of 45.5° - With scoring unit - With parallel cutting device Weight: approx. 1,270 kg

Condition: good (used), Table milling machine Martin T 25. Chedpfxsy Srtme Aqvjd

Condition: used, Year of construction: 1985, functionality: fully functional, Slide carriage length: 3320 mm Motor power: 5.5 kW Cutting height: approx. 145 mm Height and swivel adjustment via foot-operated hydraulic system Cjdpfsz Iv Hqsx Aqvjhd

Condition: used, Year of construction: 1999, Design: swiveling Swiveling angle forward: +45° Swiveling angle backward: -45° Table length: 2400 mm Table width: 900 mm Extendable frame support: Yes, with emergency stop switch Motor: 5/6 kW Number of speeds: 4 Speeds: 3000/4500/6000/9000 rpm Cedpe Ah Smbefx Aqvshd Speed selection: belt adjustment + pole change Speed display: LED Taper of milling spindle: MK 5 Milling arbor D: 30 mm Control panel on top, at eye level CENTREXBogenfräsmaster Support for feed device, swiveling Spindle height adjustment: electric Spindle swiveling adjustment: electric Spindle brakes: electric Dust extraction diameter, milling fence: 120 mm Dust extraction diameter, machine: 120 mm Spindle direction: left/right Electric axes: swiveling / up / down adjustment Closing the table opening: insert segment Design of fence jaws: Aigner Integral fence Fence adjustment: manual Milling fence display: milling jaw setting Feed device: Yes, 3 rollers Weight approx.: 1300 kg Dimensions: 3000 x 1300 x 1800 mm Location: Nattheim

Condition: used, Year of construction: 1992, completely shut down used good condition cleaned functionally tested partially overhauled Manufacturer: Martin Cjdpfx Aqsz Np I Eevshd Type: T 53 Year of manufacture: 1992 Machine no.: V190268 GS-tested for wood dust Control panel at the top Pendulum guard Table edges with low noise Safety cutter block Table adjustment with foot-operated hydraulics Digital display for chip thickness Digital display for groove depth Automatic brake Groove depth adjustment Motor kW: 5.5 Planing width approx. mm: 510 Table length approx. feeding length mm: total 2840 Dust extraction connection D mm: 160 Space requirement approx. L x W x H mm: 2900 x 900 x 1100 Weight approx. kg: 1000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Cedozbm Tfopfx Aqvohd Reversible drive motor 5/6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for overall adjustment and infeed stop separately, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swiveled away (for curved milling work). Table extension to the right and left with retractable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for plunge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table tops, left 500mm, right 500mm, with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed connection, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swiveled away for machine maintenance and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belt renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 1977, Sliding carriage: 2500 mm Cutting width: 1000 mm Codpfx Aqo Ahhm Hjvshd Scoring motor: 4.8 kW Location: Nattheim

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 554251, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, planing width: 630 mm, tool diameter: 125 mm, actuation type: electric, overall weight: 1,260 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Martin T45 Thickness Planer – Year of Manufacture 2017 – 630 mm Planing Width For sale is a Martin T45 thickness planer, year of manufacture 2017, in good condition. The machine impresses with its robust Martin construction and excellent processing quality. Thanks to the two rubber-coated feed rollers, the workpiece is reliably transported and guided evenly through the machine. This makes the T45 ideal for professional use in carpentry and joinery workshops. Technical Data - Manufacturer: Martin Maschinenbau - Model: T45 - Year of Manufacture: 2017 - Planing Width: 630 mm - Max. Spindle Speed: 5,000 rpm - Electrical Connection: 400 V / 50 Hz / 3 phases - Rated Current: 30 A - Equipment: Two rubber-coated feed rollers Codpfx Aqj Ahd Tdjvshd - Dust Extraction: Dust extraction connection including dust extraction hose Condition and Inspection The machine operates perfectly and impresses with its smooth workpiece transport. It can be inspected on-site and tested while powered on after prior arrangement. This allows you to personally verify the function and condition. Collection and Invoice - Inspection and test run possible before purchase - Dust extraction hose included in the scope of delivery - Invoice with VAT shown - For intra-community deliveries to eligible companies in other EU member states, billing with 0% Luxembourg VAT is possible if the legal requirements are met. If you have any questions or are interested in an inspection, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2011, Jointer-thicknesser combination machine Manufacturer: Martin Model: TP 300 Year of manufacture: 2011 Planing width: 530 mm Planing height: 3 - 250 mm Power: 5.5 kW Height adjustment: electric Cutter type: Tersa Number of cutters: 4 Codpfx Aqe Af Ur Isvjhd Max. chip removal: 8 mm Infeed roller: Steel Outfeed roller: Rubber Feed rate: 6 / 12 m/min Dust extraction port diameter: 140 mm Motor brake: Yes Weight: approx. 1,000 kg

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, with digital display for reading in 1/10 mm accuracy with positioning control. The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then repeatedly press the start button to change the planing height by 1 mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be saved as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12 m/min Rubber-coated infeed roller Cedpfez Icvlox Aqvehd Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this seller".

Condition: used, Year of construction: 2001, Working width: 630 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed rate: 6 / 12 m/min Infeed roller: rubber Outfeed roller: rubber Cedpfj Af Hl Sex Aqvohd Table rollers: no Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: Chsdsz Rv Tdopfx Aqved 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2023, Circular saw Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Chodpfxjz U Hh Tj Aqvsd Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Cutting height: max. 204 mm Saw blade diameter: max. 550 mm Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric The machine table has some surface rust.

Condition: excellent (used), Year of construction: 2008, Hanging, swiveling control panel with document holder 5.7" touchscreen control Variable saw blade speed 2-axis scoring unit, electrically adjustable Parallelogram crosscut table with ‘RadioCompense’ miter and length compensation system Pre-set indexing points for 0°, 22.5°, 30°, 45° on the parallelogram crosscut table Rip fence with stop flap and digital length display Extendable parallelogram crosscut table with support roller Parallel stop can be lowered under the table in the end position Table extension 600 x 400 mm with integrated storage compartment “ProLock” quick-change system for saw blades Central lubrication including miter stop for cutting acute angles Sliding table length: 3000 mm Cutting width: 1100 mm Cutting width at the rip fence: 3400 mm Cutting height: 170 mm Saw blade diameter max.: 500 mm (400 mm with scoring unit) Saw blade speeds: 2000 - 6000 rpm Saw blade tilt: 0 – 46° Motor power: 7.5 kW, 400 V, 50 Hz Chodpe Aaz E Aefx Aqvsd Working height: 900 mm Dust extraction connection: 80 and 120 mm Transport dimensions approx. L x W x H: 3550 x 1850 x 1620 mm Weight approx.: 1800 kg

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Cutterhead: Strip knives Number of knives: 4 Height adjustment: Handwheel Planing thickness display: Scale Feed speed: Infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: No Chjdpfxo Af Hmij Aqvod Motor power: 5.5 kW Extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW Chodpfx Ajy Rzytsqvod 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: used, Martin T 65 C Automatic panel saw Heavy-duty precision panel saw 5.7" touchscreen LCD color display at eye level Motor: 5.5 kW Saw blade adjustable from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm “ProLock” quick-change system for saw blades Anodized aluminum length stop with continuous support, fine adjustment for both folding stops, scale with magnifying glass, and electronically assisted length compensation for angled cuts. Extendable cutting length: 95–3,220 mm Rip fence length: 3,000 mm Electromotive parallel fence positioning with control system integration, anodized, folding aluminum guide rail, and four-point ball bearing guide. Safety area (0–200 mm) in hold mode, display resolution 0.1 mm, repeatability ±0.05 mm. Cutting width with parallel fence: 1,100 mm Double miter fence MitreX CE version Cjdo Aba Dmspfx Aqvehd Machine is WORKS-TESTED, in very good condition, from a small business First delivery 2016 Ex works

Condition: used, Year of construction: 1982, working width: 630 mm working height: 250 mm cutter head: strip knife number of blades: 2 Codpfxj Af Hl Ej Aqvjhd height adjustment: manual read out workpiece thickness: Scala feed speed: 1 infeed roller: Gummi outfeed roller: Gummi table roller: no motor power: 5,5 kW suction connection: 160mm machine length: 1200mm machine width: 1200 mm weight: 1000kg

Condition: used, Year of construction: 2007, operating hours: 1,650 h, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, scorer, No. 04550 Sliding table saw Martin T 60 CLASSIC Used, year of construction 2007, approx. 1650 operating hours Sliding table length 3000 mm Cutting width 1250 mm Saw blade diameter 250 - 400 mm Saw blade bore 30 mm Max. cutting height 130 mm Motor power 5.5 kW Speeds 4000 / 4800 / 6000 rpm, with digital display Pneumatically controlled 2-axis scoring unit Motor power scoring unit 0.75 kW Electric saw blade tilt adjustment from 0° to 46°, with digital display Electric cutting height adjustment, with digital display Manual cutting width adjustment by handwheel, with digital display Tool-changing system SprintLock Codpfx Aqezq Aqwevehd Machine operation via touchscreen Various cutting programs, including programs for rebating, grooving, cutting angled strips, slotting and tenoning, as well as chain dimensioning Cross-cut table approx. 1300 x 650 mm LW Extendable cross-cut fence up to 3200 mm, with 2 flip stops 2 extraction ports, diameters 120 and 100 mm Including complete technical documentation, 2 saw blades and 3 riving knives Transport dimensions approx. 3200 x 2100 x 1900 mm LWH Weight approx. 1300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2026, Martin Panel Saw T 77 - New Stock Machine - Chodpjw D T Dkjfx Aqved Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Csdpe Adlx Iofx Aqvohd

Condition: used, Year of construction: 1978, spindle tilting: yes 0 - 45° height adjustment: manual tilting adjustment: manual fence adjustment: manual read out height : - read out tilting: Scala read out fence: Scala sawblade diameter: 30 mm speeds: 3000, 4500, 6000, 9000 motor power: 5 kW motor brake: yes, feed brake Chodsuzkxfspfx Aqvjd suction connection: 2 x 100mm machine length: 1200mm machine depth: 1400mm weight: 800kg

Condition: used, Year of construction: 2000, Motor: 7.5 kW Tersa cutterhead, Z = 4 2x sliding rollers in the thicknessing table, height-adjustable Chodpfx Aqo Aay D Roved Steel feed roller, ribbed Infeed roller before and after the thicknessing table Safety bar Cutterhead speed: 5000 rpm Planing height: 2.8 - 250 mm with digital display Planing width: 630 mm Max. chip removal: 8 mm Dust extraction port: 160 mm Weight: approx. 1115 kg Dimensions: 1140 x 1260 x 1200 mm Storage location: Nattheim

Condition: used, Year of construction: 2000, Working width: 500 mm Motor: 5.5 kW with motor brake Tersa cutterblock with Z=2 cutters Speed: 5,000 rpm max. Maximum chip removal: 8 mm Chjds Aay D Depfx Aqved Planing table with motorized height adjustment Sliding fence adjustable in angle with integrated auxiliary stop Suvamatic cutterhead guard Weight: approx. 1000 kg Dimensions: 2850 x 850 x 1110 mm Location: Nattheim

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Csdpjzwpvaefx Aqvehd Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.