Panel sizing circular saws

MARTIN T70

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Djdpfxsxqfghs Ah Uewd Sled length: 2.500 mm cutting height: about 100 mm

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: Dwjdswkbd Eepfx Ah Usd - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm Dwsdpfx Ahjhfufgs Uod -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: good (used), Year of construction: 1991, cutting width (max.): 1,050 mm, cutting height (max.): 135 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 930 kg, power: 5.5 kW (7.48 HP), Equipment: scorer, MAKA SC 3200 Sizing saw with scoring unit Manufacturer MAKA/Griggio Technical data: Trimming carriage 3200mm cutting length 3300mm Cutting width right from saw blade 1050mm saw blade max. 400mm cutting height 135mm Saw blade can be tilted 0-45°. cutting height at 45° = 90mm (400'er saw blade) motor 5,5 KW/400 Volt 3 speeds 3/4/6000 rpm motor scorer 0,75KW Scorer Ø 125mm suction connection 120mm wide and narrow protection hood dimensions 3250x3100x830mm Dsdpfx Ahop H Tgbe Ujwd Weight 922 KG

Condition: ready for operation (used), Technical characteristics En cours de vérification Double roller carriage length: 3000 mm 5.5 kW motor 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Scoring unit 0.75 kW Parallel fence with fine adjustments 1200 mm Tilting blade ⌀ 350 mm (max 450 mm) Automatic centralized lubrication for blade pivoting Cutting height : 100 mm (max 150 mm with 450 mm blade) Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Power and Motors Voltage: 400 V Djdpfxsuciqae Ah Uowd Pluging: Three-phased Power: 7 Kw Motor: 7,5 CV Overall dimensions

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press Dwjdpetwp Iwsfx Ah Ued connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order

Condition: used, Year of construction: 1996, Carriage length: 2800 mm, anodized version (new carriage), 7.5 kW motor, automatic contactor control, digital speed display, cutting width 1000 mm, table extension 800 mm, without feed !!!! Dodpjw Sy Tgjfx Ah Uswd Location: Nattheim

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings - Exit brushes Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck Dsdpfjuhm Adex Ah Uswd

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Tilting milling Radius scrapers R2 Dsdpfxjiu U Swe Ah Uswd Polishing brushes Hot-air blower TOP condition, possible to test !

Condition: ready for operation (used), Year of construction: 2008, This BRANDT Optimat KDF 550 was manufactured in 2008. It features a machine length of 5860 mm, power requirement of 11.5 kW, and a weight of 2600 kg. Capable of handling workpiece thickness from 8 to 60 mm and edge thickness from 0.4 to 8 mm, it's ideal for precise edgebanding tasks. Consider the opportunity to buy this BRANDT Optimat KDF 550 edgebander. Contact us for more information. Application Types Edge Banding Dodpfx Ahewug Uwj Uswd